How to Extend a Wireless Network

If you have a large building or a sprawling piece of property and want Internet access throughout, you will probably have to extend a wireless network. This extension will allow you to maintain a strong wireless signal over a much larger area. To start learning some basic guidelines to extend a wireless network, scroll past the jump.

Steps

  1. Image titled Extend a Wireless Network Step 1
    1
    Set your main router as your base station. Make sure your router is connected to your computer via ethernet cable. This will allow you to login directly to the router.
    • Login to the router from a browser (in the URL bar: 192.168.0.1 or 192.168.1.1 are the standards). If you've enabled a password, enter your login and password credentials now. If you haven't, then standard settings for most routers are a login of admin and a password of password, or admin and admin.
  2. Image titled Extend a Wireless Network Step 2
    2
    Find your basic wireless settings, which should be located either on the main login screen or under "Settings." From here you will want to make sure that your router is broadcasting with the strongest signal possible � the most Mbps, or megabits per second, setting available.
    • If you haven't changed the name of your wireless network or SSID, do so now and make a note of it. This will help when setting up your wireless repeater.
    Advertisement
  3. Image titled Extend a Wireless Network Step 3
    3
    Select "Repeating Functions" or "Signal Repeat Settings" or any menu item that mentions repeating. From here you will be given an option to enable wireless repeating function in your network.
    • You will establish your primary router as your base station at this point. Make sure that you select the base station functions for this router and not repeater settings.
  4. Image titled Extend a Wireless Network Step 4
    4
    Enter, where prompted, the MAC or Media Access Control, address of the router or repeater you will be using.
    • The MAC address for your wireless repeater will be printed on a sticker located on the back of the unit. The MAC address will be 12 characters. They will be either 8 groups of 2 characters separated by hyphens or colons, or 4 groups of 4 separated by periods (i.e. 01-23-45-67-89-ab or 01:23:45:67:89:ab or 0123.4567.89ab).
  5. Image titled Extend a Wireless Network Step 5
    5
    Unplug the ethernet cable from the base station, and connect it to your repeater or secondary router that will be acting as a wireless repeater. Login to the router again using a web browser and the home URL 192.168.0.1 or 192.168.1.1.
  6. Image titled Extend a Wireless Network Step 6
    6
    Go to basic settings and make sure that your wireless repeater will be communicating with the correct wireless network by typing in the specific SSID you used for your base station.
  7. Image titled Extend a Wireless Network Step 7
    7
    Enable signal repeating functions in the repeating settings menu. For your wireless repeater you will assign a specific IP (Internet Protocol) address.
    • The first sets should be 192.168.0 (or 192.168.1), and you will enter the final digit. You can enter any number between 1 and 255. Write down this new IP address because you will need it to login to the wireless repeater if you need to change settings in the future.
  8. Image titled Extend a Wireless Network Step 8
    8
    Enter the MAC address of the base station. The MAC address for the base station will be located on the back of the unit on a sticker and will have a similar look to the MAC address for the wireless repeater.
  9. Image titled Extend a Wireless Network Step 9
    9
    Save these settings and disconnect the repeater from your computer.
  10. Image titled Extend a Wireless Network Step 10
    10
    Find a suitable location for your wireless repeater. It should be within your known Wi-Fi signal area, but near the boundaries. This way you will get maximum signal extension.
    11. Advertisement

Community Q&A

  • Question
    How do I determine the boundaries of the Wi-Fi signal area?
    Community Answer
    Community Answer
    Just walk around the perimeter of your house until you lose your signal. You could also check the box that the router came in and it might say its boundaries.
  • Question
    I forgot the password for my WiFi repeater. What can I do?
    Community Answer
    Community Answer
    Do a factory reset and start over from scratch. That will reset it back to default, usually admin/password, it depends on brand though. You can find out easily with a quick online search.
  • Question
    Do Wi-Fi extenders work if it's a different brand from the Wi-Fi router?
    R2_d2000
    R2_d2000
    Top Answerer
    Yes. A Wi-Fi extender should work even if it is a different brand from the router.
Advertisement

You Might Also Like

Secure Your Wireless Home Network
How to
Secure Your Wireless Home Network
Reconnect to a Wireless RouterGet Back Online: Easy Ways to Reconnect Any Device to Wi-Fi
Add or Change the Default Gateway in Linux
How to
Add or Change the Default Gateway in Linux
Connect to a Wireless Internet Connection
How to
Connect to a Wireless Internet Connection
See Who Is Connected to Your Wireless Network
How to
See Who Is Connected to Your Wireless Network
Connect Your PC to Your TV WirelesslyMirror Your Screen to a TV: Miracast, Chromecast & Wireless HDMI
Connect a Router to a Modem
How to
Connect a Router to a Modem
Reset Your Router Password
How to
Reset Your Router Password
Set Up a Wireless Router10 Easy Steps to Set Up a Wireless Router
Install Canon Wireless PrinterHow to Connect a Canon Printer to Wi-Fi on Windows or Mac
Find the WiFi Password of a Past Connection Using Command Prompt (CMD)
How to
Find the WiFi Password of a Past Connection Using Command Prompt (CMD)
Change the Name of a Wireless NetworkEasy Ways to Change the Wi-Fi Network Name
Find the SSID on a Computer
How to
Find the SSID on a Computer
Add a Password to Your Wireless Internet Connection (WiFi)How to Add a Password to Your Wi-Fi: 6 Methods
Advertisement

References

  1. http://www.pcmag.com/article2/0,2817,2372811,00.asp
  2. http://www.wi-fiplanet.com/tutorials/article.php/3655041

About This Article

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 14 people, some anonymous, worked to edit and improve it over time. This article has been viewed 358,140 times.
How helpful is this?
Co-authors: 14
Updated: January 31, 2023
Views: 358,140
Categories: Wireless Networking
Advertisement