A stripped or rounded nut is one of the most annoying problems you might come across while working on your car, motorcycle, snow blower, or another piece of equipment. This usually happens when your sockets or pliers slip when you're turning the nut, shaving down the edges so you can't get a grip. After this, no matter what you do, your sockets will just keep spinning instead of turning the nut. Don’t worry—you’re not out of luck! There are still a few handy tips and tricks that will help you get that nut off, and we’re here to answer your most common questions about them.

Question 1 of 7:

What’s the best tool to remove a damaged nut?

Question 3 of 7:

Can I use a hammer and chisel to get the nut off?

  1. Yes, but be careful not to damage whatever the nut is attached to. This method isn’t pretty, but it works. First, press the chisel directly against the top edge of the nut. Hit it hard with the hammer to make an indent in the nut. Then press the chisel into the indent from the right side. Hit the back of the chisel to turn the nut counterclockwise until it loosens.[3]
    • Make sure you’re hitting the nut from the right so it turns counterclockwise. If you hit it from the left, you’ll be tightening it.
    • This is not a good method to use for lug nuts on cars or fragile pieces of equipment. It’s easy to miss with the hammer and hit the object.
  2. Advertisement
Question 4 of 7:

Could I just cut the nut off?

  1. Sure, if you have a metal-cutting saw blade. A Dremel is the best tool to use in this case, since it’s small and maneuverable. Attach a metal-cutting blade and cut across the top of the nut twice to make an X. It should pop off, or loosen enough to unscrew with pliers.[4]
    • Always wear goggles and gloves while you’re cutting the nut. The saw will make sparks and fragments that could get in your eyes.
    • If the nut doesn’t come off completely after cutting, try hitting it with a hammer and chisel to break it off.
    • This isn’t the best method if you’re worried about damaging whatever the nut is attached to. Use a gentler method if that’s the case.
Question 7 of 7:

How do I get a damaged lug nut off?

  1. Use a bolt extractor so you don’t damage your rims. Getting stripped lug nuts off of a car is a bit more tricky because you could damage your wheel, rim, or tire if you’re not careful. The best choice, in this case, is a specialized bolt extractor. Press the extractor onto the lug nut and tap it with a hammer so it gets a good grip. Then grab it with a wrench or pliers and turn counterclockwise to get the nut off.[7]
    • You can also use a bolt extractor to get off other types of nuts, not just on cars.
    • Adding penetrating oil to the nut before using the bolt extractor helps loosen it up even more.
  2. Advertisement

Things You’ll Need

  • Toothed pliers or a wrench
  • Bolt extractor
  • Dremel
  • Penetrating oil
  • Torch or heat induction tool
  • Gloves
  • Goggles

Warnings

  • Always wear gloves and goggles when you’re working with heat or power tools so you don’t get hurt.
    ⧼thumbs_response⧽
Advertisement

About This Article

Barry Zakar
Co-authored by:
Handyman
This article was co-authored by Barry Zakar. Barry Zakar is a professional handyman and the founder of Little Red Truck Home Services based in the San Francisco Bay Area. With over ten years of experience, Barry specializes in a variety of carpentry projects. He is skilled at constructing decks, railings, fences, gates, and various pieces of furniture. Barry also holds his MBA from John F. Kennedy University. This article has been viewed 12,757 times.
5 votes - 100%
Co-authors: 7
Updated: August 25, 2021
Views: 12,757
Advertisement