X
wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time.
There are 8 references cited in this article, which can be found at the bottom of the page.
This article has been viewed 65,148 times.
Learn more...
Tie dying turns a white shirt into a bright spiral or pop of color. Choose white cotton fabric and use bottles of dye to experiment with the process. Tie dying long-sleeve shirts is similar to dying short-sleeve shirts, but it requires plenty of care to be taken during the wrapping process if you want to create a particular pattern.
Steps
Part 1
Part 1 of 3:
Preparing Your Tie Dye Station
-
1Buy bottles of dye at your local fabric or craft store. Bottles are much easier to use than mixed dye, because you can apply them more exactly to sections of the shirt. If you want a rainbow tie-dye shirt, look for a kit that contains all the shirts you need.[1]
-
2Read your tie-dye instructions to see if you need to use soda ash to fix the dye, or if it can be used without soaking. Purchase soda ash, or washing soda that is made of sodium carbonate. Purchase rubber bands.Advertisement
-
3Lay a plastic drop cloth on your table. It will protect the table, but it also allows the t-shirt to be wrapped more easily. Keep a plastic bag and a bucket nearby so that you can transport your shirt to the laundry room.[2]
Advertisement
Part 2
Part 2 of 3:
Wrapping Your Shirt
-
1Practice the wrapping process while the shirt is dry. Then, you can repeat with a shirt soaked in soda ash and water.
-
2Smooth out the shirt on the plastic drop cloth. Move the tips of the long sleeves so that they are gathered next to the body of the shirt. Try to keep them close if you want them to form a pattern with the rest of the shirt.
- Keep them separate if you want a different pattern on the sleeves than the body of the tee.
-
3Find the imaginary line that connects the two armpits through the center of the shirt. Pinch the shirt in the middle of that line, in the center of the chest.[3]
-
4Twist the shirt. The shirt will start to form a spiral. Use your other hand to continue twisting the shirt.[4]
-
5Feather the shirt before you finish your round spiral. This means that you will create extra lines, or folds, in the shirt between each turn.
-
6Make sure that the long sleeves travel along the length of the body as you make your spiral.
-
7Stop when you’ve made a tight spiral that is in the shape of a circle. Take rubber bands and open them with your hands. Slide them under and over the circle until they are tight on opposite ends.
- Avoid picking the shirt bundle up, since it can change the shape you’ve created. Instead, slide the rubber bands across the drop cloth.
-
8Secure the circle with rubber bands going perpendicular. Then, do diagonal lines. The end result will look like it has several pizza slices.[5]
-
9Repeat with a shirt soaked in a mixture of soda ash and water.[6]
Advertisement
Part 3
Part 3 of 3:
Dying Your Shirt
-
1Put on some food preparation gloves before you start to handle the dye.
-
2Tip the first dye bottle upside down. Apply just enough dye to soak the fabric in a pie slice-section, but not to create excess dye on your drop cloth. When in doubt, use less dye.
-
3Follow with colors of the rainbow to blend. You can also alternate colors to create a color-blocked spiral. Repeat until you’ve dyed all the pie sections.[7]
-
4Flip the shirt over onto its backside. Repeat the process of applying bottle dye to each section. Match up the right color from the front with the color on the back.[8]
-
5Place the shirt inside a plastic bag. Let it sit according to the dye instructions.[9]
-
6Soak the shirt in cold water after it has sat for enough time. Remove the rubber bands.
-
7Run the shirt through two cold water cycles in the washing machine. Do not use soap.
-
8Place it in the dryer on medium heat. It will help to set the dye further. Your shirt is ready to wear or wash as desired.[10]
Advertisement
Community Q&A
-
QuestionHow long do I leave the tie-dyed shirt in the bag?Community AnswerTypically you leave a tie-dyed shirt in a bag for at least 24 hours before washing it.
-
QuestionHow do I make a rainbow effect on a t-shirt?Community AnswerMix food coloring in a bowl with more or less water (depending on how light you want your colors to be), and dip your T-shirt into the bowl.
Advertisement
Things You'll Need
- Tie dye bottles
- Rubber bands
- Long-sleeve white cotton shirt
- Soda ash
- Plastic drop cloth
- Bucket
- Washer
- Dryer
- Plastic bag
- Food preparation gloves
References
- ↑ https://www.care.com/c/stories/3341/5-easy-tie-dye-instructions-and-4-tie-dye-pat/
- ↑ https://www.care.com/c/stories/3341/5-easy-tie-dye-instructions-and-4-tie-dye-pat/
- ↑ https://www.youtube.com/watch?v=2PJnM6MK30U
- ↑ https://www.parents.com/fun/arts-crafts/kid/tie-dye-with-kids/?slide=slide_0cc15e5f-abfc-46c4-9d61-c4ae4405787f#slide_0cc15e5f-abfc-46c4-9d61-c4ae4405787f
- ↑ http://www.favecrafts.com/Tie-Dye/Swirl-Tie-Dye-Technique-from-Tulip
- ↑ https://www.youtube.com/watch?v=PbjWkiQ5DtI
- ↑ https://boyslife.org/hobbies-projects/projects/159823/how-to-tie-dye-a-t-shirt/
- ↑ https://www.youtube.com/watch?v=Qm_ibSYv-sQ
- ↑ https://boyslife.org/hobbies-projects/projects/159823/how-to-tie-dye-a-t-shirt/
About This Article
Advertisement