How to Fold a Cloth Diaper

Co-authored by Denise Stern

Last Updated: November 9, 2021 References

There are lots of different ways to fold a cloth diaper, and many of them are super simple to do. A pad fold is great for beginners and goes in a diaper cover, while a jelly roll fold is perfect for keeping liquids from leaking out of the diaper. Other simple folds include a triangle fold and a bikini twist. Whichever fold you choose, secure it snugly using safety pins or cloth diaper clips.

Method 1

Method 1 of 4:

Creating a Triangle Fold

1
Bring one corner of the diaper to the opposite corner to form a triangle. Spread a clean diaper out on a flat surface. Pick up one corner of the cloth and bring it to the opposite end to form a triangle with 3 points.^{[1]
X
Research source}
- If the diaper is rectangular, fold in a longer side so the diaper is more of a square before forming the triangle.
2
Place your baby on the triangle so the longest edge is behind their back. Situate the cloth diaper so the long flat edge is at the top with the 3 points on the left, bottom, and right. Set the baby down on the diaper so the long edge is up behind the baby’s back and the opposite point is between the baby's legs.^{[2]
X
Research source}

Advertisement
3
Pull the bottom point up between their legs and hold it on their stomach. Take the point of the diaper that’s facing directly downwards and bring it up between the baby’s legs so it’s nice and snug. Keep this point held on the baby’s stomach using your hand.^{[3]
X
Research source}
- Make sure the cloth is covering the back of each leg.
4
Bring the left and right points to the center and fasten them. Pull the left side to the center and hold it over the baby’s belly before pulling the right side to the center too. Use a safety pin to secure the cloth in place by pushing the pin through each layer of fabric, except the one touching the baby's legs. Cloth diaper clips work well too, as they have 3 attachments that simply clip right on to each section of the cloth.^{[4]
X
Research source}
- When it's time to remove the pins, do so carefully so you don't accidentally poke the child.

Method 2

Method 2 of 4:

Using the Pad Fold

1
Lay the diaper flat on a stable surface. Spread a clean diaper out on a flat surface like a changing table or clean floor. Lay the cloth diaper down so it’s facing you vertically.^{[5]
X
Research source}
2
Fold the far left side into the center. Bring the third of the diaper on the left side to the center so it’s covering the second third. The fold doesn’t have to be perfectly precise, but it should be as even as possible.^{[6]
X
Research source}
- If you’re using a prefold cloth diaper, you’ll be folding it along the seams.
3
Bring the far right side on top of the left side. Fold the last third of the cloth diaper that’s on the far right so it’s covering the left side, creating a trifold. Straighten up the fold so it’s even in width.^{[7]
X
Research source}
4
Position the diaper in a cover or pocket diaper. This type of fold is to be used in a cover or pocket diaper since it doesn’t have its own way of being attached. Once you place it in a diaper cover, wrap it around the child as you would a normal diaper and secure it.^{[8]
X
Research source}
- Look for covers or pocket diapers at your local big box store or online.

Method 3

Method 3 of 4:

Doing a Jelly Roll Fold

1
Lay the cloth diaper down on a flat surface. Spread the cloth diaper out on a clean changing table or other surface. Situate the diaper so it’s facing you vertically.^{[9]
X
Research source}
- This fold is great for keeping runny liquids from escaping a diaper.
2
Roll the lower corners inward to the center of the diaper. Use your fingers to roll the bottom left corner to the center, and then the right corner to the center. This creates a V-shape with the diaper.^{[10]
X
Research source}
- Keep the back of the cloth diaper, the upper two corners, flat.
3
Situate the baby on the diaper so the flat edge is at the baby’s back. Place the baby on the diaper while holding the bottom edge of the cloth to keep the edges rolled. The flat edge of the diaper should be at the baby’s upper back.^{[11]
X
Research source}
4
Pull the bottom of the diaper to the baby’s belly. Bring the rolled edges up to the baby’s belly, going in between their legs. Keep one hand on this section to keep it in place on the child.^{[12]
X
Research source}
- Keep the edges rolled when you bring them up to the baby’s belly.
5
Bring the left and right edges to the center and secure them. Pull the left corner of the diaper around the baby’s waist and onto the belly, and then do the same with the right corner. Use a safety pin or cloth diaper clips to secure the cloth and keep all the edges in place.^{[13]
X
Research source}
- Pull the left and right edges around the waist snugly so the diaper isn’t too loose.

Method 4

Method 4 of 4:

Folding a Bikini Twist

1
Lay the cloth diaper flat on a table. Spread out a clean cloth diaper on a flat surface like a changing table. Position the cloth so that it’s facing you vertically.^{[14]
X
Research source}
2
Twist the cloth 180 degrees in the center. Pull the bottom right corner of the cloth diaper to the left side and move the left corner to the right side, forming a twist in the fabric. Once the twist is formed, spread out each corner so they’re lying flat.^{[15]
X
Research source}
- Make sure the twist is in the center of the fabric.
3
Place the child on the diaper so the twist is between their legs. Set the baby down on the diaper so the top flat edge is against the baby’s back. The twist should be in between the baby’s legs with the bottom edges still laying flat.^{[16]
X
Research source}
4
Bring the bottom, left, and right edges to the baby’s belly. Pull the bottom section up over the baby’s stomach and hold it in place. Bring the left corner around the baby’s waist and place it over the center, and then the right corner over.^{[17]
X
Research source}
- Pull each side up against the baby snugly so the diaper isn’t too loose.
5
Secure the diaper with safety pins or cloth diaper clips. Use safety pins to attach the right and left edges to the cloth at the baby’s stomach, carefully pushing the pin through the fabric and attaching it in place. If you’re using cloth diaper clips, press each attachment to the left, right, and bottom edges of the diaper.^{[18]
X
Research source}
- If you’re using safety pins, put your fingers under the cloth as you’re pinning to make sure you don’t clip the baby’s skin.

Expert Q&A

Question

How do I keep my cloth diapers from leaking?

Denise Stern
Parenting Specialist
Denise Stern is a Parenting Specialist and the CEO of Let Mommy Sleep, the country’s leading Baby Nurse and Postpartum Care service. Denise specializes in providing nurturing care to newborns and evidence-based education to their parents. She holds a BA in Public Relations from North Carolina State University. Denise was the US Chamber of Commerce Leading Woman-Owned Business in 2013, a Washington FAMILY Magazine Mother of the Year in 2016, and on the elite White House Summit for Working Families hosted by the President and First Lady Obama in 2014. Let Mommy Sleep is the only company of its kind that holds a local government contract to teach newborn and postpartum care.

Denise Stern

Parenting Specialist

Expert Answer

There will always be leaks, but if you want to give yourself a fighting chance, buy diaper covers with elastic bands that go around the baby's legs and bottom. There are also now some hybrid diapers with compostable insides if that's a concern for you.