The abacus (the suanpan is the most useful variety) is a deceptively simple calculating tool still used all over the world. It's a useful learning device for the visually impaired, as well as for anyone who wants to learn the roots of the modern calculator. After learning the basics of counting on the abacus, you can quickly perform arithmetic like addition, subtraction, multiplication, and division.

Part 1
Part 1 of 4:

Counting

  1. 1
    Orient your abacus properly. Each column in the top row should have one or two beads per row, while each column in the bottom row should have four. When you start, all of the beads should be up in the top row, and down in the bottom row. The beads in the top row represent the number value 5 and each bead in the bottom row represents the number value 1.[1]
  2. 2
    Assign each column a place value. As on a modern calculator, each column of beads represents a "place" value from which you build a numeral. So, the farthest column on the right would be the "ones" place (1-9), the second farthest the "tens" place (10-99), the third farthest the hundreds (100-999), and so on.[2]
    • You can also assign some columns to be decimal places if necessary.
    • For example, if you are representing a number like 10.5, then the furthest right column would be the tenths place (the first decimal place), the second column would be the ones place, and the third column the tens place.
    • Likewise, to represent a number like 10.25, the furthest right column would be the hundredths place, the second column would be the tenths place, the third the ones place, and the fourth the tens place.
    Advertisement
  3. 3
    Start counting with the beads in the lower row. To count a digit, push one bead to the "up" position. "One" would be represented by pushing a single bead from the bottom row in the farthest column on the right to the "up" position, "two" by pushing two, etc.[3]
    • You'll find it easiest to use your thumb to move the beads in the bottom row, and your index finger to move the beads in the top row.
  4. 4
    Complete the "4/5 exchange.” Since there are only four beads on the bottom row, to go from "four" to "five," you push the bead on the top row to the "down" position and push all four beads from the bottom row down. The abacus at this position is correctly read "five." To count "six," push one bead from the bottom row up, so the bead in the top row is down (representing a value of 5) and one bead from the bottom row is up.[4]
  5. 5
    Repeat the pattern for higher numbers. The process is essentially the same across the abacus. Go from "nine," in which all the beads in the ones place are pushed up and the bead in the top row is pushed down, to "ten," in which a single bead from the bottom row of the tens place is pushed up (while the beads in the ones place are pushed back to their starting or "0" position).
    • For example, 11 would have one bead in the second column pushed up, and another in the first column pushed up, all on the bottom row. Twelve would have one in the second column and two in the first column, all pushed up, and all on the bottom row.
    • Two hundred and twenty six would have two in the third column pushed up in the bottom row, and two in the second column pushed up in the bottom row. In the first column, one bead on the bottom row would be pushed up, and the bead on the top row would be pushed down.
  6. Advertisement
Part 2
Part 2 of 4:

Adding and Subtracting

  1. 1
    Input your first number. Say you've got to add 1234 and 5678. Enter 1234 on the abacus by pushing up four beads in the ones place, three in the tens place, two in the hundreds place, and one in the thousands place.[5]
  2. 2
    Start adding from the left. The first numbers you'll add are the 1 and the 5 from the thousands place, in this case moving the single bead from the top row of that column down to add the 5, and leaving the lower bead up for a total of 6. Likewise, to add 6 in the hundreds place, move the top bead in the hundreds place down and one bead from the bottom row up to get a total of 8.
  3. 3
    Complete an exchange. Since adding the two numbers in the tens place will result in 10, you'll carry over a 1 to the hundred place, making it a 9 in that column. Next, put all the beads down in the tens place, leaving it zero.
    • In the ones column, you'll do essentially the same thing. Eight plus 4 equals 12, so you'll carry the one over to the tens place, making it 1. This leaves you with 2 in the ones place.
  4. 4
    Count your beads to get the answer. You're left with a 6 in the thousands column, a 9 in the hundreds, a 1 in the tens, and a 2 in the ones: 1,234 + 5,678 = 6,912.
  5. 5
    Subtract by doing the addition process in reverse. Borrow digits from the previous column instead of carrying them over. Say you're subtracting 867 from 932. After entering 932 into the abacus, start subtracting column-by-column starting on your left.
    • Eight from nine is one, so you'll leave a single bead up in the hundreds place.
    • In the tens place, you can't subtract 6 from 3, so you'll borrow the 1 in the hundreds place (leaving it zero) and subtract 6 from 13, making it 7 in the tens place (the upper bead up and two lower beads).
    • Do the same thing in the ones place, "borrowing" a bead from the tens place (making it 6) to subtract 7 from 12 instead of 2.
    • There should be a 5 in the ones column: 932 - 867 = 65.
  6. Advertisement
Part 3
Part 3 of 4:

Multiplying

  1. 1
    Record the problem on the abacus. Start at the farthest left column of the abacus. Say you're multiplying 34 and 12. You need to assign columns to "3", "4", "X", "1", "2", and "=". Leave the rest of the columns to the right open for your product.[6]
    • The “X” and “=” will be represented by blank columns.
    • The abacus should have 3 beads up in the farthest column left, four up in the next farthest, a blank column, a column with one bead up, two beads up in the next, and another blank column. The rest of the columns are open.
  2. 2
    Multiply by alternating columns. The order here is critical. You need to multiply the first column by the first column after the break, then the first column by the second column after the break. Next, you'll multiply the second column before the break by the first column after the break, then the second column before the break by the second column after the break.[7]
    • If you are multiplying larger numbers, keep the same pattern: start with the leftmost digits, and work to the right.
  3. 3
    Record the products in the correct order. Start recording in the first answer column, after the blank one for the “=” sign. You will keep moving beads on the right hand portion of the abacus as you multiply the individual digits. For the problem 34 x 12:[8]
    • First, multiply 3 and 1, recording their product in the first answer column. Push three beads up in that seventh column.
    • Next, multiply the 3 and the 2, recording their product in the eighth column. Push one bead from the upper section down, and one bead from the lower section up.
    • When you multiply the 4 and the 1, add that product (4) to the eighth column, the second of the answer columns. Since you're adding a 4 to a 6 in that column, carry one bead over to the first answer column, making a 4 in the seventh column (four beads from the bottom section pushed up to center bar) and a 0 in the eighth (all beads in their original starting position: the top section bead pushed up, bottom section beads pushed down).
    • Record the product of the last two digits 4 and 2 (8), in the last of the answer columns. They should now read 4, blank, and 8, making your answer 408.
  4. Advertisement
Part 4
Part 4 of 4:

Dividing

  1. 1
    Leave space for your answer to the right of the divisor and the dividend. When dividing on an abacus, you will put the divisor in the left-most column(s). Leave a couple blank columns to the right, then put the dividend in the columns next to those. The remaining columns to the right will be used to do the work leading to the answer. Leave those blank for now.[9]
    • For example, to divide 34 by 2, count 2 in the left-most column, leave two blank columns, then put 34 over to the right. Leave the other columns blank for the answer section.
    • To do this, push two lower beads from the bottom portion up in the left-most column. Leave the next two columns alone. In the fourth column, push three beads from the bottom portion up. In the fifth column from the left, push four beads from the bottom portion up.
    • The blank columns between the divisor and the dividend are just to visually separate the numbers so you don't lose track of what's what.
  2. 2
    Record the quotient. Divide the first number in the dividend (3) by the divisor (2), and put it in the first blank column in the answer section. Two goes into 3 once, so record a 1 there.
    • To do this, push one bead from the bottom portion up in the first column of the answer section.
    • If you like, you can skip a column (leave it blank) between the dividend and the columns you want to use for the answer section. This can help you distinguish between the dividend and the work you do as you calculate.
  3. 3
    Determine the remainder. Next, you need to multiply the quotient in the first answer section column (1) by the dividend in column one (2) to determine the remainder. This product (2) needs to be subtracted from the first column of the dividend. The dividend should now read 14.
    • To make the dividend read 14, push two of the bottom portion beads currently pushed up to the center bar at the fifth column back down to their starting position. Only one bead in the lower portion of the fifth column should remain pushed up to the center bar.
  4. 4
    Repeat the process. Record the next digit of the quotient in the next blank column of the answer section, subtracting the product from the dividend (here, eliminating it). Your board should now read 2, followed by blank columns, then 1, 7, showing your divisor and the quotient, 17.
    • Two beads from the bottom portion of the left most column will be pushed up to the center bar.
    • This will be followed by several blank columns.
    • One bead from the bottom portion of the first answer section column will be pushed to the center bar.
    • In the next answer section column, two beads from the bottom portion will be pushed up to the center bar, and the bead from the top portion will be pushed down to it.
  5. Advertisement

Community Q&A

  • Question
    Is it good for children to use an abacus?
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    Yes, an abacus is a great tool for teaching children basic math. The different senses involved in using an abacus, like sight and touch, can also help reinforce the lessons.
  • Question
    Where was the abacus invented?
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    The type of abacus most commonly used today was invented in China around the 2nd century B.C. However, abacus-like devices are first attested from ancient Mesopotamia around 2700 B.C.!
  • Question
    My abacus has five beads on the bottom and two on the top. Why?
    Community Answer
    Community Answer
    Your abacus is a Chinese abacus. It has more calculative ability than a Japanese Soroban abacus. However, the essentials are effectively the same, so these instructions should still work.
Advertisement

About This Article

wikiHow Staff
Co-authored by:
wikiHow Staff Writer
This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow's Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards. This article has been viewed 2,117,097 times.
291 votes - 71%
Co-authors: 65
Updated: July 20, 2022
Views: 2,117,097
Categories: Mathematics
Article SummaryX

To use an abacus to add, first orient it by pushing 1 or 2 beads to the top of each row and 4 beads to the bottom of each row, which will set it back to zero. After you’ve oriented it, assign each a column a place value. For example, the furthest column on the right should be the ones place, like 1-9, and the second farthest column on the right should be the tens place, like 10-99. If you’re working with decimals, make sure to make the furthest column the tenths place. When you’re ready to start adding, push up the designated beads in each column to represent your first number. For example, if you’re adding 1,234 and 5,678, push up 4 beads in the ones column, 3 in the tens column, 2 in the hundreds column, and 1 in the thousands place to represent 1,234. Then simply lower the beads, starting in the thousands place, to add to the second number, 5,678. To learn how to do other functions on an abacus, like multiplying and dividing, read on!

Did this summary help you?
Advertisement