This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow's Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards.
There are 14 references cited in this article, which can be found at the bottom of the page.
The wikiHow Culinary Team also followed the article's instructions and verified that they work.
This article has been viewed 341,497 times.
Learn more...
The appeal of movie theater popcorn has little to do with actual butter, but sometimes you can't beat that nostalgic, greasy taste. You can buy most of the same products used by actual movie theaters, but it's also possible to get close with nothing more than basic pantry ingredients.
Ingredients
- Popcorn
- Butter
- Coconut oil or canola oil
- Popcorn salt or Alberger salt
- Flavacol (optional)
- Butter flavored popcorn topping (optional)
Steps
Making Movie Style Popcorn
-
1Choose your salt. Many movie theaters use salt processed using the Alberger process, as the many jagged edges on the salt crystals help it stick to the popcorn.[1] Diamond Crystal is the only consumer salt brand in the United States that uses this process.[2] You can get a similar effect from extra-fine powdered salt, which is often sold as "popcorn salt" and stocked next to the popcorn.[3]
- You can create powdered salt at home by grinding any salt in an electric coffee grinder, hand-turned salt mill, or mortar and pestle. If using a coffee grinder, grind a small amount of coffee beans afterward to remove the leftover salt.
-
2Clarify butter. Theaters that do use real butter (rather than butter-flavored oil) often use clarified butter. Clarification removes some moisture from the butter, which prevents the popcorn becoming soggy.[4] You can clarify butter at home just by melting it over low heat until the bubbling stops and the liquid turns clear, about 30-40 minutes for 1 lb (0.45 kg) of butter.[5] Strain the liquid through a damp cheesecloth and let cool to make clarified butter. Discard the milk solids left in the cheesecloth or at the bottom of the pan.
- The famous "buttered popcorn" smell of a movie theater comes from artificial butter flavor. Actual butter won't replicate this perfectly.
Advertisement -
3Heat coconut oil or canola oil in a pan. You may want to save the clarified butter for later drizzling, as it will likely brown or burn if you try to pop kernels in it. Coconut oil used to be the standard in movie theaters (and many still use it), but you may wish to follow a more recent trend and switch to canola oil, which has less saturated fat and a higher smoking point.[6] Whichever you choose, pour just enough oil to cover the base of a large pan. Heat on a stovetop until the oil shimmers.
- Note that most theaters that use canola oil actually use a more hydrogenated version that contains more fat than consumer canola oil.
- If using coconut oil, the oil should melt completely.
- You'll need a pan with a lid, but you do not need to cover it now.
-
4Make the popcorn. Throw in a few unpopped kernels and cover the pot. Once these kernels have popped, add the rest of the popcorn. Use ⅓ cup (80 mL) popcorn kernels for a 6 quart (5.6 L) pot.[7] Cover and heat, shaking occasionally, until most of the kernels are popped. Pour popped corn into a large bowl whenever the pot gets full.
- Leave the lid slightly ajar so some of the steam escapes, preventing soggy popcorn.
- To reduce the number of burned or unpopped kernels, remove from heat right after adding the kernels. Wait for thirty seconds so the kernels reach an even temperature, then return to heat.
-
5Add the salt right after the popcorn is popped. You'll need about ⅓ tsp (1.5 mL) of fine grained salt in this recipe.[8] The exact size of the salt crystals affects the flavor, so you may need to adjust to taste. Add the salt right after the popcorn is popped, since the steam clinging to the popcorn will help the salt stick.[9]
-
6Toss in melted clarified butter. Pour the popcorn into a large bowl. Add 1 or 2 tbsp (15–30 mL) room temperature clarified butter to the hot pan, according to taste. It should melt quickly in the hot pan without additional heat. Drizzle it onto the popcorn when the butter is still yellow or only slightly brown.
Using Artificial Butter Flavors
-
1Pop your popcorn in coconut oil or canola oil. These are the two most common oils used by movie theaters. Heat a thin layer of oil until shimmering in a large pot. Add a few test kernels, then add the rest of the popcorn when they pop. Remove from heat for thirty seconds so the kernels reach an even temperature. Return to heat then cook, shaking occasionally, until popped.
- You'll need about ⅓ cup popcorn kernels for a 6 quart (5.6 L) pot.
-
2Add flavored salt during or after cooking. Many theaters add a salt product that contains artificial butter flavor, often sold under the brand name Flavacol.[10] You can order this online to add to your own popcorn. Since 1 tsp (5 mL) Flavacol contains 116% of the FDA-recommended daily sodium limit, it's best to sprinkle sparingly.[11]
- Theater employees typically toss in the Flavacol before popping. However, Flavacol does release airborne chemicals when heated which could cause harm over long term use.[12] This is unlikely to happen if you only make popcorn for personal use, but you can add the Flavacol after cooking if you are concerned.
-
3Drizzle on butter flavored popcorn topping. The Flavacol should already add that artificial butter flavor, but if you want that greasy feel on your tongue and fingers, you can buy a jug of "popcorn topping" online. Drizzle this on top to taste after your popcorn is ready.
- As you might imagine, this is mostly hydrogenated fat, and not the best for your health.[13] These products may also contain diacetyl or other ingredients linked to respiratory problems and (less conclusively) to Alzheimer's, although these are only likely to cause harm over long periods of time.[14] [15]
Things You'll Need
- Large pot
- Large bowl
Warnings
- Pepper mills are not meant to grind salt, as the salt will corrode the steel burrs of the mill.⧼thumbs_response⧽
References
- ↑ http://food52.com/blog/15919-can-you-really-make-movie-theater-popcorn-at-home
- ↑ https://www.diamondcrystalsalt.com/food
- ↑ http://www.culinarylore.com/specialty-foods:what-is-popcorn-salt
- ↑ http://www.foodnetwork.com/recipes/food-network-kitchens/theater-style-buttered-popcorn-recipe.html
- ↑ http://altonbrown.com/clarified-butter-and-ghee-recipes/
- ↑ http://articles.latimes.com/1994-05-02/entertainment/ca-53051_1_canola-oil
- ↑ http://www.simplyrecipes.com/recipes/perfect_popcorn/#ixzz3WYmD89XZ
- ↑ http://www.foodnetwork.com/recipes/alton-brown/perfect-popcorn-recipe.html
- ↑ http://www.culinarylore.com/specialty-foods:what-is-popcorn-salt
- ↑ http://food52.com/blog/15919-can-you-really-make-movie-theater-popcorn-at-home
- ↑ http://www.webstaurantstore.com/documents/nutrition/3802045.pdf
- ↑ http://www.cdc.gov/niosh/hhe/reports/pdfs/2006-0195-3044.pdf
- ↑ http://www.thedailymeal.com/what-s-really-your-movie-theater-popcorn-topping
- ↑ http://www.cdc.gov/niosh/topics/flavorings/exposure.html#diacetyl
- ↑ https://pubs.acs.org/doi/abs/10.1021/tx3001016
- ↑ https://www.reddit.com/r/YouShouldKnow/comments/1yg29v/ysk_you_can_make_movie_theater_popcorn_at_home/
About This Article
To make movie butter for your popcorn, first clarify some butter by melting it over low heat for 30-40 minutes and then straining it through a cheesecloth. Then, set the clarified butter aside and heat up some canola or coconut oil in a pan. Next, make your popcorn in the oil and then add some salt right after it's finished popping. Finally, toss the popcorn in the clarified butter before serving. To learn how to make movie butter using artificial butter flavors, scroll down!