It’s summertime and you’re at the charcoal grill, feeling the pressure of cooking meat and vegetables to perfection for your family and friends. The first step is to figure out how to get the fire going, preferably without scorching yourself in the process! With a bag of charcoal and some lighter fluid or a charcoal chimney--plus a good amount of patience--you’ll be on your way to grilling up a delicious meal.

Method 1
Method 1 of 3:

Preparing Your Grill

  1. 1
    Remove the lid and cooking grate. This will allow you to reach the bottom charcoal grate.[1]
  2. 2
    Clean out ash and dirt from the grill. Sweep out any leftover debris at the bottom of the grill and collect them in a trash bin.
    Advertisement
  3. 3
    Open the bottom grill vent. This will let air get to the charcoal and help it burn.
    • You can partially close the vent you start to grill your food to regulate the temperature of your coals while cooking, but allow enough oxygen to reach the coal so that the fire doesn’t go out. You can also use the lid and lid vents to control the fire’s temperature.
  4. 4
    Use briquettes for an easier, faster light. Many people prefer briquettes because they catch easily, burn longer and are inexpensive.[2]
  5. 5
    Choose hardwood charcoal for a more intense flavor. Hardwood charcoal burns out faster than briquettes but gives your meat a delicious, smoky flavor.[3]
  6. 6
    Use a mix of briquettes and charcoal. You’ll still get the classic barbecue flavor of the charcoal, but combined with the long-lasting burn of the briquettes.[4]
  7. Advertisement
Method 2
Method 2 of 3:

Lighting Charcoal with Lighter Fluid

  1. 1
    Group the coals in a pyramid shape at the bottom of the grill. The heat can rise from the bottom and the coals will help light each other, spreading the heat from one coal to the next.[5]
    • Pour out enough charcoal or briquettes to form an even layer on the bottom of your grill.
    • Use more coal in cold or wet weather for a longer burn.
  2. 2
    Pour a generous amount of lighter fluid onto the coal. Let it soak in for 3-5 minutes so that when you light the grill, the lighter fluid doesn’t burn off the coal immediately.
    • Pour carefully to avoid getting lighter fluid on yourself. If you spill any while pouring, change clothes or thoroughly clean up the spill before lighting the grill.
    • If you don’t have lighter fluid, place a piece of newspaper doused in vegetable oil under the charcoal and carefully light it with a match or lighter.
  3. 3
    Add a little more lighter fluid to moisten the fuel. This will help the coals light more quickly.
  4. 4
    Light the charcoal carefully with a long match or long lighter. Light it in 1-3 places on the moistened coal and allow it to spread to the drier coal.
  5. 5
    Let it burn for 10-15 minutes. The coal will heat up and the lighter fluid will burn off. You’re ready to start cooking once the coal is a white-gray color and glowing red at the center.
    • Wait until the coals are ready to begin grilling. If you start cooking your food before the lighter fluid burns off, your steak or chicken will taste like petroleum!
    • Do not add more lighter fluid to your grill once the coals are burning. It won’t make the fire heat up faster and you may burn your hands.
  6. 6
    Arrange your charcoal with tongs. The briquettes should spread out on the bottom of the grill slightly past the area where you place your food to allow for even cooking.[6]
    • For vegetables and thinner meat like chicken, spread the charcoal evenly on the bottom of the grill.
    • To grill thicker meat like steak, make the charcoal higher on one side than the other. You will start cooking the meat on the side with more charcoal. When the outside is cooked to your preference, finish cooking the meat on the side with less charcoal.
  7. 7
    Replace your cooking grate. Your coals are heated and your grill is ready to go. Time to barbecue!
  8. Advertisement
Method 3
Method 3 of 3:

Using a Charcoal Chimney

  1. 1
    Fill the chimney with charcoal. Pour in enough charcoal to reach about to the top of the chimney or just below it.[7]
  2. 2
    Stuff newspaper in the bottom of the chimney. Crumple the newspaper loosely and stuff it so that the bottom of the chimney is full, but not too tightly to suffocate the flame.[8]
  3. 3
    Place the chimney on the cooking grate and light the newspaper. Use a match or lighter and wear heat-safe rubber gloves.[9]
  4. 4
    Let the charcoal burn until it’s white-gray with ash. Give it about 20-30 minutes to burn, supervising the flame closely.[10]
  5. 5
    Pour the charcoal onto the grill when it’s white and ashy. Lift up the grate and set it aside, then use heat-safe rubber gloves to pour the charcoal into the bed of the grill. Arrange the coal with tongs and replace the cooking grate on top. The charcoal will be very hot, so be careful not to spill.
  6. Advertisement

Community Q&A

  • Question
    Should the lid be on while the coal is heating up?
    Community Answer
    Community Answer
    No. Leave the lid off while the coal is heating up. It will allow for more air to help heat the coals. With the lid on, you will suffocate the fire. Let get coals get white all over before you add food.
  • Question
    Does the vent on the bottom have to be opened, and why?
    Community Answer
    Community Answer
    It should be open completely when lighting the charcoal, but can be partially closed to regulate the temperature of your coals during cooking. If it is closed all the way, you may starve the fire of oxygen and the fire may go out. I normally leave the bottom vent completely open and use the lid and lid vents to control the fire.
  • Question
    What is the smaller grate for?
    Community Answer
    Community Answer
    Some grills have a smaller grate under the grilling grate for the charcoal to rest on. This lets the charcoal get more oxygen and burn faster
Advertisement

Warnings

  • When you are done grilling, make sure the charcoal briquettes are completely out to prevent fires. Drench all of the charcoal in water and make sure it is cool enough to touch before you leave the coals behind or dispose of them.
    ⧼thumbs_response⧽
  • Use grilling safety equipment, such as barbecue gloves or heat-resistant rubber gloves, to avoid being burned.
    ⧼thumbs_response⧽
Advertisement

Things You'll Need

  • Charcoal grill
  • Charcoal briquettes
  • Hardwood charcoal
  • Lighter or matches
  • Lighter fluid
  • Charcoal chimney
  • Tongs or spatula
  • Grilling or heat-safe rubber gloves

About This Article

wikiHow Staff
Co-authored by:
wikiHow Staff Writer
This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow's Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards. This article has been viewed 1,050,523 times.
How helpful is this?
Co-authors: 16
Updated: October 4, 2022
Views: 1,050,523
Categories: Barbecue Equipment
Article SummaryX

To light a charcoal grill, open the lid and remove the grate. Sweep out any old ash and dirt, then open the bottom grill vent. Pour in enough briquettes, hardwood charcoal, or a combination of both to cover the bottom of the grill in an even layer. Pile the charcoal into a pyramid shape in the middle of the grill. Pour a generous amount of lighter fluid over the coals and let it sit for 3-5 minutes so it has time to soak in, then sprinkle on a little bit more so that the surface of the coals is moist. Use a long match or grill lighter to light the pile of coals in 1 to 3 places. Let the coals burn for 10-15 minutes, or until they are greyish in color with a red glow at the center, before putting any food on the grill. Use tongs to arrange the coals the way you want. For instance, if you want the grill to have a cool side and a hot side so you can cook over indirect heat, pile the coals on one side of the grill. Otherwise, spread them out evenly. Put the grate back on the grill when you’re ready to start cooking. To learn how to use a charcoal chimney, keep scrolling.

Did this summary help you?
Advertisement