How to Graft a Tree

If you like a tree's fruit and want more of it, your best option may be grafting. This is the only way to guarantee the fruit will come out the same. There are various ways to graft, but with practice and these instructions, you can master the technique that's best for you.

Method 1
Method 1 of 5:

Using T-Budding

  1. Image titled Graft a Tree Step 1
    1
    Choose your cultivar and your rootstock. In order for your budding to be successful, you must cut a scion (small piece for grafting) from a healthy, disease-free cultivar (origin tree) as well as a suitable growing tree (rootstock). The rootstock in this case is an established tree that the scion can be spliced into. For T-budding, the bark of both trees must be "slipping." This means the bark is easily peeled off and the green layer underneath is moist, which usually occurs in the spring. Try irrigating them well to help them along.[1]
    • T-Budding is typically used for fruit tree propagation.
  2. Image titled Graft a Tree Step 2
    2
    Cut a scion. For T-budding, you must cut into the branch 1⁄2 inch (1.3 cm) below the bud to 3⁄4 inch (1.9 cm) beyond the bud. Make the cut as deep as needed to include the soft, green layer beneath the bark but not any deeper. This green material must be exposed on your scion for a successful graft. If you must store your scion bud, wrap it in a damp paper towel, place it in a polyethylene bag, and store it in a refrigerator.[2]
    Advertisement
  3. Image titled Graft a Tree Step 3
    3
    Make a T-cut on your rootstock. Choose a space on a branch or sapling that is 1⁄4 inch (0.6 cm) to 1 inch (2.5 cm) in diameter. The space must be free of any buds, ideally far from any buds. Make a vertical slice in the bark about 1 inch (2.5 cm) long and deep enough to expose that green layer. Make a horizontal slice of the same depth that is about one third the distance around the rootstock. Twist the knife in the juncture of the slices to create flaps of the bark, making the green layer visible.[3]
  4. Image titled Graft a Tree Step 4
    4
    Introduce the scion. Slip the scion containing the bud under the flaps you've just created on the rootstock, taking care not to introduce any dirt or germs. If part of the scion's bark sticks out above the T-cut, slice it off so that everything fits together snugly.[4]
  5. Image titled Graft a Tree Step 5
    5
    Tie the scion to the rootstock. Wrap a stretchy rubber material such as grafting rubber around the rootstock to hold the scion in place. Be careful not to jostle or cover the bud.[5]
  6. Image titled Graft a Tree Step 6
    6
    Remove the tie. In about a month, the rubber you wrapped around the rootstock may loosen and fall off. If it doesn't, gently remove it yourself so that the area will not be constricted.
  7. Image titled Graft a Tree Step 7
    7
    Follow up on your bud. If the bud looks plump and healthy, it is probably alive. If it looks shriveled, then it has died and you'll have to start again.
  8. Image titled Graft a Tree Step 8
    8
    Remove other material. The next spring, once the bud has begun to sprout leaves, make a sloped cut 1⁄2 inch (1.3 cm) above the successful bud. Remove all other side shoots below the bud. This will promote growth of the grafted bud since it will be the only thing being nourished by the rootstock.
    9. Advertisement
Method 2
Method 2 of 5:

Trying Chip Budding

  1. Image titled Graft a Tree Step 9
    1
    Choose your cultivar and your rootstock. In chip budding, the diameters of the scion and the rootstock should be the same diameter. If they're not, you'll have to cut them differently so that the green layers match up when combined.
    • Chip Budding is one of the easiest ways to graft, and is particularly good for fruit trees.
  2. Image titled Graft a Tree Step 10
    2
    Cut a slice from your rootstock. Make a small angled cut about 1/5 to 1/4 the rootstock's diameter into the rootstock. Slice your knife downward at this depth for 1 1⁄4 to 1 1⁄2 inches (3.2 to 3.8 cm). Remove your knife without severing the bark. Move the knife upward a small amount and then cut back in and downward to meet the end of the initial slice to create a small notch. Remove the chunk of bark from the rootstock.
  3. Image titled Graft a Tree Step 11
    3
    Cut a scion from your cultivar. Use the chunk cut from your rootstock as the model for your scion, using the scion bud as the center point of the new cutting. You want the scion to fit into the space made in the rootstock as neatly as possible.
  4. Image titled Graft a Tree Step 12
    4
    Introduce the scion to the rootstock. Slip the scion down into the notch at the bottom of the rootstock cut. Make sure that the green layers of the scion and rootstock are touching all the way around the edges. If they are not, the graft will fail.[6]
  5. Image titled Graft a Tree Step 13
    5
    Secure the scion. Wrap a stretchy rubber material around the rootstock to hold the scion in place. Polyethylene tape is preferable. Be careful not to jostle or cover the bud.
    • Some of the specifics of this process will depend on what kind of tree you are growing and what kind of material you're using. For example, if you use grafting tape and grafting an apple tree, you had better cover the whole thing with the tape, as the tape will protect the bud from drying, and it will be torn by the bud as it grows. But other materials may not give the same protection, and may be more difficult to tear. Large buds are difficult to fully cover, and can be exposed to air. It depends on the fruit.
  6. Image titled Graft a Tree Step 14
    6
    Remove the tie. In about a month, the rubber you wrapped around the rootstock may loosen and fall off. If it doesn't, gently remove it yourself so that the area will not be constricted.
  7. Image titled Graft a Tree Step 15
    7
    Follow up on your bud. If the bud looks plump and healthy, it is probably alive. If it looks shriveled, then it has died and you'll have to start again.
  8. Image titled Graft a Tree Step 16
    8
    Remove other material. The next spring, once the bud has begun to sprout leaves, make a sloped cut 1⁄2 inch (1.3 cm) above the successful bud. Remove all other growth below the bud to promote growth through the grafted bud.
    9. Advertisement
Method 3
Method 3 of 5:

Using Whip Grafting

  1. Image titled Graft a Tree Step 17
    1
    Choose your cultivar and your rootstock. Whip grafting can only be used to join rootstock and scions that are the same diameter, ideally between 1/4 and 1/2 inch in diameter.
    • The graft must be made after the threat of cold but before the bark of the stock begins slipping (peels off easily).
    • The scion must be dormant (not sprouting) at this time, and should be a twig about a foot long containing three to five buds.
  2. Image titled Graft a Tree Step 18
    2
    Prepare the scion. Remove the terminal end of the scion. At the base of the scion, make a sloping cut to remove that end.
  3. Image titled Graft a Tree Step 19
    3
    Prepare the rootstock. Make a sloping cut across the chosen branch that mirrors the one you made on the scion. They should fit together precisely.
  4. Image titled Graft a Tree Step 20
    4
    Cut tongues. Make matching slices down into both the rootstock and the scion in such a way that they can hook into each other.
  5. Image titled Graft a Tree Step 21
    5
    Introduce the scion. Place the scion slightly offset from the rootstock and slide it down so that the tongues overlap. Make sure that the layer of green wood beneath the bark of both parties aligns or the graft will not take.[7]
  6. Image titled Graft a Tree Step 22
    6
    Secure the scion. Wrap a stretchy rubber material around the graft site to hold the scion in place. Grafting tape works well. If using a different material, be sure to remove it in about a month.
  7. Image titled Graft a Tree Step 23
    7
    Look after the graft. Once the graft is planted, keep an eye out for new growth below the graft, as you may need to remove it. At first, you can leave some leaves on the rootstock so that nutrients keep flowing up the tree until the graft is successful. However, if you see an actual young branch/shoot forming on the trunk of the rootstock, remove it; this will help encourage the scion to grow.
    • Once the scion really starts to grow and a few new leaves appear above the graft (5 or so healthy leaves), remove any further growths from the rootstock, below the graft. This removal will help the plant thrive with growth on the scion, rather than the rootstock, and has to be done as long as the tree is alive. Otherwise, the rootstock will try to make its own branches; you'll need to remove them whenever they grow.
    8. Advertisement
Method 4
Method 4 of 5:

Trying Bark Grafting

  1. Image titled Graft a Tree Step 24
    1
    Choose your cultivar and your rootstock. Scions should be up to three dormant, or not currently sprouting, twigs of about a foot long containing three to five buds. Don't cut scion and rootstock at the same time.
    • Rootstock should be straight, smooth, vertical branches 1–2 inches (2.5–5.1 cm) in diameter.
    • Bark grafts should be performed once the rootstock bark has begun slipping (when the bark is easily peeled off in spring).
    • This graft is usually used for instances in which the rootstock is too big for whip grafting.
  2. Image titled Graft a Tree Step 25
    2
    Amputate the rootstock. Above a crotch out of which several branches grow, cut straight across one branch with a very sharp saw so as not to crack or rip the bark or wood of the branch. Make sure you leave a branch nearby to keep nutrients moving up the tree.
  3. Image titled Graft a Tree Step 26
    3
    Prepare the scions. Cut the scions down to around 5 inches (12.7 cm) in length while still retaining about 5 buds per scion. Around three inches from the base of the scion, make a sloping cut inward until you reach the base.
  4. Image titled Graft a Tree Step 27
    4
    Prepare the rootstock. Hold each scion up against the rootstock so that about 1⁄8 inch (0.3 cm) of the cut surface of the scion shows above the rootstock. With a sharp knife, outline each scion on the rootstock. Remove the scions and finish cutting away this bark so that each will fit snugly into its space.
  5. Image titled Graft a Tree Step 28
    5
    Introduce the scions. Place each scion in its space on the rootstock, taking special care to ensure the green wood of both parties aligns exactly. Once in place, hammer two wire nails into each scion to hold them into the tree.
  6. Image titled Graft a Tree Step 29
    6
    Seal the graft. Pour grafting wax or asphalt water emulsion over the area to seal all cut surfaces from drying and bacteria. Check the seal again the next day to make sure no holes have formed.
  7. Image titled Graft a Tree Step 30
    7
    Look after the graft. Keep removing all growth below the graft. Once one scion shows more promise than the other(s), leave that one as is while pruning the less successful graft(s). Two summers after grafting, remove all but the strongest scion.
    8. Advertisement
Method 5
Method 5 of 5:

Using Cleft Grafting

  1. Image titled Graft a Tree Step 31
    1
    Choose your cultivar and your rootstock. Scions should be two dormant, or not currently sprouting, twig of about a foot long containing three to five buds.
    • Rootstock should be straight, smooth, vertical branches 1–2 inches (2.5–5.1 cm) in diameter.
    • Cleft grafts should be performed right before the bark of the rootstock starts slipping (being easily peeled off) in spring.
    • This graft is usually used for top working (changing the type of fruit) of a mature tree by being performed on a number of branches.
  2. Image titled Graft a Tree Step 32
    2
    Amputate your rootstock. Choose a point below which the branch is straight and blemish-free for six inches and then make a clean perpendicular cut, removing the rest of the branch. Be careful not to tear or split the branch or bark. Be sure to leave a branch that has sprouted nearby to keep nutrients moving up the tree.
  3. Image titled Graft a Tree Step 33
    3
    Cleave your rootstock. Use a cleft-graft knife or a hatchet to split the branch straight down the center for about 6 inches (15.2 cm).
  4. Image titled Graft a Tree Step 34
    4
    Prepare the scions. Remove the tip and the base of the scion. Beginning just below the bottom bud, make a sloping cut on either side of the scion that reaches all the way to the bottom.
  5. Image titled Graft a Tree Step 35
    5
    Insert the scions into the rootstock. Using a large screwdriver or small chisel to hold open the cleft in the rootstock, insert a scion into either side of the cleft. Make sure once again that the green layer of the wood, not the bark, is aligned. No cut surface on the scion should be visible above the top of the rootstock.
  6. Image titled Graft a Tree Step 36
    6
    Seal the graft. Pour grafting wax or asphalt water emulsion over the area to seal all cut surfaces from drying and germs. Check the seal again the next day to make sure no holes have become exposed.
  7. Image titled Graft a Tree Step 37
    7
    Look after the graft. Keep removing all growth below the graft. Once one scion shows more promise than the other, leave that one as is while pruning the less successful graft. Two summers after grafting, remove all but the strongest scion.
    8. Advertisement

Expert Q&A
Did you know you can get expert answers for this article? Unlock expert answers by supporting wikiHow

  • Question
    When is the best time to graft peach trees?
    Andrew Carberry, MPH
    Andrew Carberry, MPH
    Food Systems Expert
    Andrew Carberry is a Food Systems Expert and the Senior Program Associate at the Wallace Centere at Winrock International in Little Rock, Arkansas. He has worked in food systems since 2008 and has experience working on farm-to-school projects, food safety programs, and working with local and state coalitions in Arkansas. He is a graduate of the College of William and Mary and holds a Masters degree in public health and nutrition from the University of Tennessee.
    Andrew Carberry, MPH
    Andrew Carberry, MPH
    Food Systems Expert
    Expert Answer

    Support wikiHow by unlocking this expert answer.

    The best time to graft peach trees is during the Spring, when the bark is 'slipping'.
  • Question
    Can I graft a peach cutting to a plum tree?
    Community Answer
    Community Answer
    You can make a tongue and groove graft to connect most types of closely related trees to the base of a more productive rootstock ( in your case, both are stone fruits). Do it while they are dormant. You may also take a budwood graft which has a higher success rate and is much easier. I graft apples in New York and have 2 trees with over 6 varieties of apples between the two - all done with budwood.
  • Question
    Can I graft a grapefruit on my olive trunk?
    Community Answer
    Community Answer
    Trees need to be compatible and of the same kind. You can graft a grapefruit on a citrus tree, orange or lemon tree, etc.
Advertisement

Warnings

  • Be sure your trees are all able to survive in your climate.
    ⧼thumbs_response⧽
  • You must pay the propagation fee at a nursery that holds the license of a patented cultivar to avoid legal action by the Nursery Licensing Association. These fees are usually small.
    ⧼thumbs_response⧽
Advertisement

Things You'll Need

  • Sharp cutting instrument
  • Rootstock
  • Scions
  • Tying material such as budding rubber or polyethylene tape
  • Sealant such as grafting wax or asphalt water emulsion
  • Cleaving instruments such as a hatchet and large screwdriver

You Might Also Like

Grow Citrus Fruits
How to
Grow Citrus Fruits
Plant a Tree
How to
Plant a Tree
Graft Roses
How to
Graft Roses
Plant Fruit Trees
How to
Plant Fruit Trees
Care for a Money TreeLucky Money Tree: Proper Care from Soil to Watering
How to
Grow a Coconut Tree
Grow an Oak Tree from an Acorn
How to
Grow an Oak Tree from an Acorn
Prune a Pear Tree
How to
Prune a Pear Tree
Care for a Lemon Tree
How to
Care for a Lemon Tree
Prune an Olive Tree
How to
Prune an Olive Tree
How to
Grow a Cherry Blossom Tree
Grow Lucky Bamboo
How to
Grow Lucky Bamboo
Grow a Mango Tree
How to
Grow a Mango Tree
How to
Grow Bougainvillea
Advertisement

References

  1. ↑ https://www.rhs.org.uk/advice/profile?pid=443
  2. ↑ http://www2.ca.uky.edu/agc/pubs/ho/ho39/ho39.pdf
  3. ↑ https://www.rhs.org.uk/advice/profile?pid=399
  4. ↑ http://www.fruitmentor.com/grafting-orange-trees-t-bud
  5. ↑ http://www.fruitmentor.com/grafting-orange-trees-t-bud
  6. ↑ https://www.rhs.org.uk/advice/profile?pid=400
  7. ↑ https://www.rhs.org.uk/advice/profile?pid=443
  8. ↑ https://www.ag.ndsu.edu/hort/info/fruit/graft.htm

About This Article

Andrew Carberry, MPH
Co-authored by:
Andrew Carberry, MPH
Food Systems Expert
This article was co-authored by Andrew Carberry, MPH. Andrew Carberry is a Food Systems Expert and the Senior Program Associate at the Wallace Centere at Winrock International in Little Rock, Arkansas. He has worked in food systems since 2008 and has experience working on farm-to-school projects, food safety programs, and working with local and state coalitions in Arkansas. He is a graduate of the College of William and Mary and holds a Masters degree in public health and nutrition from the University of Tennessee. This article has been viewed 576,232 times.
93 votes - 95%
Co-authors: 24
Updated: April 5, 2022
Views: 576,232
Categories: Featured Articles | Growing Trees and Shrubs
Article SummaryX

To graft a tree, start by cutting a bud off of a healthy tree that has peelable bark that's green and moist underneath. Then, make a "T" shaped cut on the tree you want to graft onto and slip the bud into the flaps of bark you cut. Wrap some grafting rubber around the tree to hold the bud in place and leave it for a month. After a month, remove the grafting rubber and check on the bud, which should look plump and healthy. To learn other ways you can graft a tree, scroll down!

Did this summary help you?
Advertisement