How to Dye Faux Fur

Co-authored by Sophia Latorre

Last Updated: August 10, 2021

To change the color of a faux fur item, you simply need to submerge it in a dye bath. Make sure you choose dye formulated for synthetic fibers for best results. Take care to protect yourself and your workspace so that your faux fur item is the only thing that gets dyed! This is a simple project that can help you transform a piece of faux fur from bland to stunning in a matter of hours.

Part 1

Part 1 of 3:

Making Your Dye Bath

1
Purchase dye made for dyeing synthetic fibers. Many companies manufacture different kinds of dye based on the fabric you will be coloring. For best results, choose a dye formulated for synthetic fabrics. Regular dye may not absorb into the synthetic fibers, or may result in patchy coloring. You can find synthetic dye in craft and fabric stores as well as online.^{[1]
X
Research source}
2
Protect yourself and your workspace. Dye can easily stain your skin and the surfaces in your home. To avoid this, lay plastic sheeting or several layers of newspaper over your workspace. Keep paper towels handy to clean up any drips or spills, and wear old clothes or an apron as well as rubber gloves to protect your hands.^{[2]
X
Research source}

Advertisement
3
Fill a bucket with hot water and the recommended amount of dye. Choose a bucket or basin large enough for the faux fur to fit loosely in. Read the directions on the package of dye to determine how much water and how much dye to use. Use the hottest water available from your faucet. Use a stainless steel spoon, dowel rod, or similar instrument to thoroughly combine the dye and water.^{[3]
X
Research source}
- Avoid using a porcelain sink or tub, as the dye may stain in. Opt for plastic or stainless steel, instead.^{[4]
  X
  Research source}
4
Add a pinch of salt to the basin to help the fur absorb the dye. Any kind of salt will do, and you only need a small amount, such as 1 tablespoon (15 mL). Stir it into the dye bath until it has dissolved completely.^{[5]
X
Research source}

Part 2

Part 2 of 3:

Coloring Your Faux Fur

1
Soak the faux fur in hot water for 1 hour. In order to help the dye absorb into the fibers, you’ll need to wet the fur before dyeing it. Submerge it in a tub, sink, bucket, or basin full of the hottest water available from your faucet for 1 hour to ensure all the fibers are thoroughly soaked. Then, remove the fur and wring out the excess water.^{[6]
X
Research source}
2
Submerge the fur in the dye bath. Carefully place the faux fur in the basin or bucket filled with water and dye. Make sure that all parts of the fur are completely submerged in the dye bath.^{[7]
X
Research source}
3
Allow it to soak for up to 3 hours, stirring occasionally. Stir the dye bath and flip the fur over every 15 to 30 minutes to ensure the fabric evenly absorbs the color. When you flip the fur, check the color to see if you’ve reached the desired shade.^{[8]
X
Research source}
- Keep in mind the color will fade a bit when rinsed and dried, so allow it to soak until it is a shade or two darker than you want.

Part 3

Part 3 of 3:

Rinsing and Drying Your Faux Fur

1
Remove the fur from the dye bath. Make sure to keep your rubber gloves on to protect your skin from becoming stained. Carefully take the fur out of the dye bath, then hold it over the bucket or basin for a few minutes to allow for dripping. Then, transfer the fur to a stainless steel sink or move it outside so you can use the hose to rinse it.^{[9]
X
Research source}
2
Rinse the fur with cool water until the water runs clear. To remove excess dye from the fur, rinse it under cool, running water until no more dye comes off the fabric. Wring out the excess water.^{[10]
X
Research source}
3
Allow the fur to air dry. Hang the fur up to dry, like over a shower rod using a sturdy hanger or outdoors on a clothesline. Take care to place plastic sheeting or newspaper underneath it if drying it indoors.^{[11]
X
Research source}
4
Clean up your workspace. It’s important to wash your bucket or basin as soon as possible. Use mild dish soap and a sponge or rag that you don’t mind throwing away to scrub the bucket and stir stick.^{[12]
X
Research source}
5
Set the color in the clothes dryer. Once the fur has air dried, transfer it to the clothes dryer. Ensure no other clothing items are in the dryer, even though the dye shouldn’t transfer to other items if it was rinsed thoroughly. Use a medium heat setting and run the dryer through one complete cycle. The heat will set the dye and prevent it from rubbing off.^{[13]
X
Research source}
- Read the care tag to ensure the fabric can go in the dryer first!

Community Q&A

Question

What can I do if I don't have a dryer?

Hannah Janis

Community Answer

You can set the color with an iron. I would recommend exercising caution while doing this, however, as too much heat can damage the fibers or even cause them to melt.
Question

Can I use Epsom salt instead of cooking salt?

Community Answer

It would work, I wouldn't recommend anything scented though, as it may cause problems. Also, quick warning to be careful while drying, I'd say put the dryer on low or delicate heat, or even set it with a hair dryer, as a lot of dryers will overheat and make the fur look matted.