How to Wash Leather

Co-authored by Susan Stocker

Last Updated: August 10, 2021 References

Expensive leather should only be wiped and spot-cleaned, but if you have a leather purse or another smooth leather item that has seen better days, you can wash it in the washing machine. Make sure you use the right kind of soap and cold water so the leather doesn't warp. As a safer alternative, wash your leather products by hand. Be sure to take extra care to protect and preserve unfinished leather products.

Method 1

Method 1 of 3:

Cleaning by Hand

1
Hand wash leather for basic maintenance and deep cleaning. Hand cleaning is great for spot treating scuff marks and dirt, but it’s also an effective way of deep cleaning leather.^{[1]
X
Research source} Although if your item is expensive or made of hard leather, a professional cleaner might be the safest cleaning method.
2
Make a soapy water solution with castile soap. Pour a small amount of castile soap into a bowl of distilled water.^{[2]
X
Research source} Agitate the solution with your hand or a whisk to distribute the soap and create bubbles.
- For even better leather protection, use a soap specially formulated for cleaning leather. These kinds of soaps are available at many general retailers, hardware stores, and craft stores.
- If you don’t have castile soap or a specialty leather cleaner, you can use a mild soap, like dish soap, as a substitute.^{[3]
  X
  Research source}
- Always test your cleaning solution on an out of sight spot on the leather before using it to clean more visible parts.^{[4]
  X
  Research source}
Advertisement
3
Dip a soft, lint-free cloth in the cleaning solution. A normal dishcloth will do if you don’t have better options, but a microfiber cloth will work best. Avoid using any kind of abrasive material, like a scrubbing pad, as these may scratch leather, creating cloudiness in its finish.
- Generally speaking, harsh cleaners should be avoided when cleaning leather. These can cause a negative reaction the deforms the leather’s surface.
4
Wipe the leather with the cloth to remove dirtiness. Follow the grain of the leather with your cloth as you wipe. In areas where there is caked-on dirt or a tough-to-remove spot, rub using a light, circular motion to remove the debris.^{[5]
X
Research source}
- Avoid completely saturating the leather with water as you clean, which can damage the leather. You may want to allow the leather to dry a bit if it becomes too wet while cleaning.^{[6]
  X
  Research source}
5
Remove soap film and remaining dirtiness with a clean rag. You should be especially careful to remove all soap when you're done, as it can dry the leather out and cause it to crack. Take a fresh lint-free rag and dampen it with clean water. Wipe all cleaned leather surfaces thoroughly.
6
Let the item air dry. Arrange the item as it would rest normally on a hanger or suitable surface (like a chair or drying rack) until it air dries completely. Avoid exposing leather items to direct sunlight, as this can dry out the fabric and cause it to crack.^{[7]
X
Research source}
7
Treat the item with leather conditioner. This last step will restore the leather's smooth texture and keep it protected. Always follow the conditioner’s directions for the best results, but generally, buff conditioner into the fabric with a clean, dry, lint-free cloth.^{[8]
X
Research source}
- Over time, oil that keeps leather supple and resilient disappears from the fabric. Cleaning, especially, can leave leather brittle if you don’t replenish these oils with leather conditioner.^{[9]
  X
  Research source}
- When cleaning finished leather, avoid products such as mink oil and leather waxes. They can destroy the polish and appearance of finished leather products.

Method 2

Method 2 of 3:

Using a Washing Machine

1
Pick an item that isn't too expensive. It's important that you know from the outset: there's no guarantee that machine-washing your item won't do damage to it. Durable items, like boots or jackets, might be the best candidates for machine-washing.^{[10]
X
Research source}
- Don't wash leather that is brightly colored, as color may fade in the washing machine.
- Avoid washing leather items that have delicate seams or lots of detailing, unless you're comfortable risking damage to these features.
- If an item is expensive and needs to be cleaned, like a fancy pair of boots or a nice suede jacket, use a spot cleaning method or a professional cleaning service.^{[11]
  X
  Research source}
2
Buy or make castile soap. This gentle soap is relatively easy on leather, which can be damaged by soaps that are more abrasive. Any type of castile soap will do. If you can't find it at the store, you can make your own.^{[12]
X
Research source}
3
Pour ¼ cup (59 ml) of soap into the detergent dispenser. Castile soap is used in the same way you'd use regular laundry detergent. Add the soap to your laundry machine in the fashion your machine requires and turn the water setting to “Cold.”^{[13]
X
Research source}
4
Add the leather item and wash it with a gentle cycle. To prevent your leather item from taking too much of a beating during the wash cycle, you may want to throw in a few other black items to absorb some shock. Use the gentlest setting your washer has.
- Turn your leather item inside out, if possible, and then zip all zippers and fasten all fasteners. This process may help “flush” stains out while protecting the visible parts of the leather from damage.^{[14]
  X
  Research source}
5
Run the wash cycle. Keep an eye on the leather item as it washes. You’ll want to snag it from the washing machine as soon as the cycle is finished, so it doesn't get a chance to dry in there.^{[15]
X
Research source}
- Leather that is dried crumpled, creased, or misshapen could cause it to permanently deform in these ways.
6
Restore the item's shape. Lay it out flat or hang it up. Smooth out the wrinkles and folds that formed in the wash. In some cases, you may be able to get some additional length out of the leather by pulling in it firmly to stretch it out while it’s still wet.
- Be careful when stretching the leather. There’s no guarantee it won’t rip, and if it does it won’t be easy or cheap to fix.^{[16]
  X
  Research source}
7
Let the item air dry. Avoid letting leather items dry directly in the sun. The sunlight can bake out important oils necessary to keep your leather supple.^{[17]
X
Research source} Hang the items to air dry out of the sun in a room. Open the windows to increase airflow and decrease dry times.^{[18]
X
Research source}
- Don't use a hair dryer or any type of directed heat on your leather item.
- If you use the dryer, make sure it's the "low" or "no-heat" setting.^{[19]
  X
  Research source}
8
Apply leather conditioner to the item. Leather conditioner will help restore the leather to its previous texture and protect it. Generally, conditioner is applied by being buffed into the leather with a paper towel or soft, lint-free cloth. After the conditioner is applied, the item is ready for use.^{[20]
X
Research source}
- If you don’t have a commercial leather conditioner, try substituting a light application of olive oil. Apply the olive oil as you would a conditioner – by lightly buffing it into the leather.

Method 3

Method 3 of 3:

Washing Unfinished Leather Products

1
Identify unfinished leather. Items with unfinished leather will have a rough-looking surface. You’ll find leather like this most commonly on items that generally have some wear and tear, such as construction boots, horse saddles, and baseball gloves.
2
Remove dirt with saddle soap. Pour a quarter-sized amount of saddle soap onto a clean, damp cloth. After you’ve worked up a good lather of soap on the surface of the leather, flush it clean with water. As per usual, avoid oversaturating the leather with water.
- If you notice the leather becoming waterlogged, take a short break and let it air dry for a little while to prevent damage.^{[21]
  X
  Research source}
3
Use a soft bristle brush for severe dirtiness and crevices. Your cloth might not be enough to clear crevices or bust up severe dirtiness. Be sure to use a very soft bristle brush, like one made from nylon, to protect damage to the surface of the leather.^{[22]
X
Research source}
- To prevent accidentally damaging the leather, before using a brush, first test it out on an inconspicuous spot of the leather first.
4
Wipe away remaining lather. Dampen a clean, lint-free cloth in water. Wring out excess moisture then use this cloth to wipe away any remaining soap or dirtiness. Be thorough! Leftover soap will dry out and harm the surface of your leather.^{[23]
X
Research source}
5
Air dry the leather item overnight. Unfinished leather has a tendency to take on water a little more easily than finished leather. Because of this, you should give unfinished pieces at least eight hours to dry, or an overnight period.^{[24]
X
Research source}
6
Treat the leather. Pour a leather preservative, such as mink oil, onto the dried item. Using the remaining unused cloth, work a generous amount of oil onto the object, especially into any cracks and areas that look worn. The item is now ready to use.

Expert Q&A
Did you know you can get expert answers for this article? Unlock expert answers by supporting wikiHow

Question

What is the best cleaner for leather?

Susan Stocker
House Cleaning Professional
Susan Stocker runs and owns Susan’s Green Cleaning, the #1 Green Cleaning Company in Seattle. She is well known in the region for outstanding customer service protocols — winning the 2017 Better Business Torch Award for Ethics & Integrity —and her energetic support of green cleaning practices.

Susan Stocker

House Cleaning Professional

Expert Answer

Support wikiHow by unlocking this expert answer.

Mix together mild dishwashing soap and warm, not hot, water. Then wipe down the leather. Avoid using vinegar because it can deepen stains in leather.
Question

How can I get mold out of my leather couch?

Community Answer

There is no way to completely remove mold growth from leather and it is recommended that you dispose of the material. If you insist on keeping the material(s), try this: For surface growth, as a result of humidity, try cleaning mold growth off the surface using a soap/detergent solution (don't need bleach). For extensive mold growth on leather, replace the affected materials if you can (cut out and patch) or clean it, dry it completely, and encapsulate it with another material. Materials that have been in contact with "grey" or "black" water (i.e. sewage) should be disposed of. Always wear proper personal protective equipment (respirator, gloves) when handling moldy materials.
Question

How do I clean smooth leather boots that have fabric softener stains?

Community Answer

Leather that has become stained, faded, or discolored may be impossible to return to its original color. Consult an expert in these situations, as you'll likely have to redye the item. Redyeing may be expensive.

Warnings

In some cases, trace elements in your water could cause discoloration in leather products. Use distilled water when cleaning to prevent this from happening.

⧼thumbs_response⧽
Helpful 1 Not Helpful 0