How to Sign Your Name in American Sign Language

Last Updated: October 26, 2022 References

When talking to a member of the Deaf community, one of the first things you should do is introduce yourself. This article will show you how to say your name in American Sign Language, the language a signer is most likely to be using in the United States and Canada. Universal Sign Language is rarely used and not a practical or reliable means of communication. These instructions will not work in most other countries.

Method 1

Method 1 of 2:

Introducing Yourself in ASL

1
Sign "Hi." Make a closed "5" hand shape (open palm, fingers together). Put your thumb on the side of your forehead and slightly pull away, in a small "salute."^{[1]
X
Research source}
- Alternatively, just wave in a small motion near your head.
2
Sign "My." place your hand on your chest, near the center. Do not pat your chest.
- Some people prefer to point instead, touching the index finger to the breastbone. Both signs are used, although this signs tend to mean "me." ^{[2]
  X
  Research source}
Advertisement
3
Sign "Name." Extend your index and middle fingers with the rest of your fingers folded down, as though you were fingerspelling U. Turn them on their side, so the index finger is on top. Place the fingers of your dominant hand on top of the fingers of your other hand, tapping lightly twice. This should form a sort of X shape, flat in front of you.^{[3]
X
Research source}
4
Fingerspell your name. Now fingerspell your name. Keep your hand in a steady position in front of you. Fingerspell at a steady rate; it's more important to move smoothly than quickly.
- Pause briefly between words if you are signing your full name.
- If your name contains two identical letters in a row (such as the O's in spoon), "open" and "close" your hand to repeat the letter. For letters that cannot be easily repeated (such as the m's in Emma), instead move your hand a short distance to the side for the second letter, without changing the hand shape. Or, bounce it "on top" of the preceding letter.^{[4]
  X
  Research source}
5
Put it together. Practice this again in a smooth motion: "Hi, my name _____." Keep the words in exactly this order.
- There is no verb "to be" in ASL. (was, is, were, being, been...) Don't try to fingerspell "is" into the sentence.
6
Add body language to show emotion. Body and facial expressions are extremely important to ASL. Signing without adjusting your face and posture is like speaking in a monotone, and makes it much harder to hold a conversation with you.
- When you're signing your name, try to look welcoming. Put on a small smile and open your eyes a tad wider. By the time you sign "MY", your head should be slightly cocked with understanding. Make eye contact with the person you're signing with.
7
Insert your name sign (optional). Name signs, discussed below, are not necessary for introductions. If you are being formally introduced, you'll typically stick with the fingerspelling. A name sign may come later, in a more casual setting. However, if you are being introduced casually, for instance by a close mutual friend, you might change the introduction to "Hi, my name (finger spelled name), (name sign)."

Method 2

Method 2 of 2:

Earning a Name Sign in ASL

1
Start with fingerspelling. At this point, since you don't have a name sign, you can introduce yourself by fingerspelling your spoken name. First, learn how to fingerspell the ASL alphabet from this wikiHow article, online videos, or a Deaf contact. Spelling your name is as simple as signing each letter in turn. Practice until you can sign it at a steady pace, holding your hand in the same position in front of you.^{[5]
X
Research source}
- Signed languages are not based on alphabets, so spelling most words (signs) is not important. Fingerspelling is useful for situations like this, when you need to introduce a proper noun (your name) that doesn't have a sign.
- If your name is short and easy to fingerspell, this might be your permanent name.
2
Learn about name signs. Your "name sign" is a special word invented for you personally. There's no such thing as a translation of an English name into a name sign. Instead, it's up to Deaf signers to invent a name for you, when they feel you are part of the community. Here are a few patterns that name signs tend to follow.
- The arbitrary name sign: One common way to create a name sign is to form one hand into the fingerspelled letter that begins your name. Tap this letter a couple times against a specific spot on your body, usually your forehead, cheek, chin, shoulder, or chest. Alternatively, move your hand between two nearby locations, or move it back and forth in "neutral space" a short distance in front of your chest.
  - There's no reason to choose one spot over another, which is why this type of name sign is called "arbitrary."^{[6]
    X
    Research source}
- The descriptive name sign: These name signs reference a characteristic, usually an obvious, physical one.^{[7]
  X
  Research source} For instance, you could sweep your hand along a scar on your face, or twirl your fingers down past your neck to refer to your long hair. Novice signers often prefer these to arbitrary signs because they seem more fun. However, it's even more difficult to make one of these up on your own. Signed languages use a visual grammar that limits hand shape, location, and movement. Unless you've taken courses in ASL or practiced it for a long time, the name you make up might not look like a word at all.
- The hybrid name sign: There's a third and final type of name sign: a sign that refers to a physical characteristic, but uses the hand shape for the first letter of your name. Although this is common in many Deaf circles, some people see this as a modern, hearing introduction that doesn't fit in the traditional naming system.^{[8]
  X
  Research source} It's entirely possible that a Deaf person eventually gives you a hybrid name. Trying to invent one of these yourself could come across as annoying or rude, even more so than inventing a different type of name.
3
Allow Deaf people to name you whenever possible--don't make up your own name sign. When a prominent Deaf adult gives you a name sign, she has decided you are a part of the Deaf community. This is a major moment for a non-native signer, and in many circles it can take years of friendship to happen. Even if you aren't convinced by this argument, there are several risks to inventing your own name sign:^{[9]
X
Research source}
- You might use a hand shape or motion that's difficult to follow, or breaks grammar rules. ("Hi, my name is Zzxqbub.")
- You might invent a sign that looks like a rude word.
- A local signer might already be using that name sign.
- Your name sign might look like the name of a prominent person. (Imagine a foreigner trying to adopt the name Martin Luther King.)
- It also goes against Deaf culture for a Hearing person to create their own name sign.
4
Watch names change and multiply. If you learn ASL and get to know experienced signers, you might notice people referred to by multiple name signs. This usually happens when they receive a name sign from several different communities.^{[10]
X
Research source} Over time, a name sign might shift in location or hand shape to keep it apart from a similar name, make it faster to sign, or remove a reference that's become embarrassing or irrelevant.

Community Q&A

Question

Where can I find resources in my area to learn ASL?

Community Answer

If you can't find a group in your area, try online. Lifeprint.com is great place to go to for beginners.
Question

How do I say Cynthia in sign language?

Community Answer

C- Take your hand and, quite literally, make a "C". Y- Make a fist, but stick your thumb and pinkie out. N- Again, make a fist, but with you thumb stick it under your pointer and middle finger and stick it out between your ring and middle finger. T- Like the "N", you make a fist, but this time you put it under only your pointer finger and stick it out between your pointer and middle finger. H- You just point your pointer and middle finger out and put your thumb over it. I- Make a fist, but stick your pinkie out. A- Just a fist.
Question

How do I say Ella in sign language?

Community Answer

For an E- Hold your hand up and curl your fingers (not to a fist but as if looking at your nails) then turn your hand outwards. For an L- Place your hand into a fist and extend your thumb and pointer finger into an "L" shape. and for an A- Hold your hand in a fist with your thumb to the side.

Warnings

Deaf children and young adults often enjoy giving out name signs, but they might be more motivated by fun than practicality. You might end up with an unflattering name, or a name that's cumbersome to sign.

⧼thumbs_response⧽
Helpful 31 Not Helpful 20