How to Make Paper Look Old

Co-authored by Nicole Bolin

Whether you’re looking to spruce up an art project or give a poem a better platform than printer paper, you might need to age a sheet of paper. While the internet has many aging methods for you to try, crumpling and spritzing is the top action to take. If this doesn’t give your paper the aged look you were hoping for, try the stain and bake method, use flame and heat, or bury the paper to give it that ancient, weathered look.

Method 1

Method 1 of 4:

Crumpling and Spritzing

1
Crumple the paper.^{[1]
X
Expert Source

Nicole Bolin
Crafts & DIY Specialist
Expert Interview. 9 September 2020.} Take a sheet of paper in your hand and crumple it into a ball. The tighter the ball, the more creases your paper will have.^{[2]
X
Research source}
2
Uncrumple the paper and spritz it with water, tea or coffee. After uncrumpling the sheet of paper, fill a squirt bottle with your chosen liquid. Then, squirt the paper until the spots you’re looking to shape and color are damp.
- Note that the liquid you use will give the paper a different look. Water won’t color the paper, but will enable further alterations. Tea will give a slight brown color, while coffee will give the sheet a darker color.
Advertisement
3
Shape various types of damage into the paper. Now that it is damp, the paper will be easier to shape. Try tearing off edges, removing small circles with your fingernail, or creating tiny wrinkles^{[3]
X
Research source}. This damage simulates the passage of time; the older you want the sheet of paper to look, the more damage you need to include.
- If you want to make darker, deeper creases, crumple the damp paper again. Be careful not to rip the page in half.
4
Lay out the paper to air dry. Place the paper on a flat surface, such as a countertop or table. The sheet should completely dry in a few hours.
- Alternatively, you can use a hair dryer to speed up this process.

Method 2

Method 2 of 4:

Staining and Baking

1
Choose and brew your solvent. To age your paper, you can choose to use coffee for a darker color or tea for a lighter color.^{[4]
X
Expert Source

Nicole Bolin
Crafts & DIY Specialist
Expert Interview. 9 September 2020.} You can also affect the color of your paper during the brewing process.
- If using coffee, you can darken or lighten the color by using more or less coffee grounds.
- With tea, the resulting shade of your sheet of paper will be affected by how long you leave the tea in the water. A longer infusion will result in a darker shade, while a short infusion will make for a lighter shade.
- Let your liquid cool before proceeding to the next step.
2
Place the paper on a baking or cookie sheet. Make sure the paper can fit inside the sheet easily, without going over the edges.
3
Preheat the oven to 200ºF (90ºC). By preheating your oven at this point, it should reach the desired temperature by the time the paper is ready to be baked.
4
Pour the solvent onto the baking sheet. Start pouring in a corner of the baking sheet, not directly over the paper. Only pour enough liquid to cover the sheet of paper with a thin film. Don’t be concerned about solvent ending up beneath the paper; it will soak up the liquid beneath it.
5
Use a sponge brush to spread the coffee/tea around. Here you can be creative with the patterns you create. You can spread the solvent evenly around the sheet if you want a more uniform look. Otherwise, you can spread it unevenly to create more vivid, obvious patterns.^{[5]
X
Research source}
- If you’d like to create a more vivid, spotty pattern, you can sprinkle coffee grounds on the paper, letting them stand for a few minutes.
6
Dab excess liquid with a paper towel. Make sure there are no pools of the liquid left either on the paper or in the baking sheet. You’re not trying to get the paper completely dry, just making sure there is no unabsorbed liquid sitting on the sheet.
7
Modify the paper. Before you put the baking sheet and paper in the oven, you can add a few touches to make the paper seem even older while it's damp and easy to manipulate. Tear a thin, jagged strip off the side. Or, dig small holes out of the paper with your fingernail; you can crumple these tiny wads and move them to other parts of the paper for a bumpy, parchment-like look. Additionally, you can press down on the paper with something like a fork to leave imprints.
8
Place the baking sheet in the oven for four to seven minutes. Ideally, you’ll want to put the sheet on a middle oven rack. Keep an eye on the paper as it bakes. You’ll know the process is complete once the edges start to curl up. The time it takes for this to happen depends on your oven.
9
Remove the paper and allow it to cool. Using oven mitts, remove the baking sheet from the oven. Give the paper 10 to 15 minutes to cool down before you attempt to write on it.

Method 3

Method 3 of 4:

Using Flame and Heat

1
Take a sheet of paper over a sink. This is important in case you accidentally light the paper on fire; you can just drop it into the sink and douse it in water. For this particular method you should write on the paper after the aging process, to avoid losing some of your work with excessive burning.^{[6]
X
Research source}
2
Find a candle or lighter. There is no difference in the effectiveness of each source of fire. Simply use whatever is available to you. Avoid using a butane lighter as the flame is too intense for this type of work.
3
Run the flame along the paper’s edges.^{[7]
X
Expert Source

Nicole Bolin
Crafts & DIY Specialist
Expert Interview. 9 September 2020.} Hold the edges of the paper between 1/2 inch (1cm) and 1 inch (2.5cm) above the flame. Move the flame along the edges, going back and forth along the sheet’s perimeter. This will create the darkened look of paper that's been around for a very long time and been damaged by time and circumstance. Do not put it too long on one place by the candle.^{[8]
X
Research source}
- Don’t let the flame linger on any one spot too long; this could set the whole sheet of paper on fire.^{[9]
  X
  Expert Source
  
  Nicole Bolin
  Crafts & DIY Specialist
  Expert Interview. 9 September 2020.}
- As you move the flame along the paper’s edges, make sure you’re moving away from your hand to avoid potential burns.
4
Burn small spots into the paper. If you want to further damage your sheet of paper, you can burn little holes into it. Again, put the paper around an inch above the flame, this time letting it linger. Pay attention to this spot as it browns and blackens. Once it’s reached the desired color, remove it from the flame.
- If you want to burn holes into your sheet of paper, leave it above the flame slightly longer. The heat will eventually burn through, and a small flame will catch. Be quick to blow it out.
- If the paper catches fire quicker than you can blow it out, drop it in the sink and douse it in water.

Method 4

Method 4 of 4:

Burying Paper in the Yard

1
Dig a hole in your backyard. You want this hole just deep enough to fit a tennis ball. No need to damage your yard unnecessarily.^{[10]
X
Research source}
2
Crumple the paper into a ball and place it inside the hole. Sprinkle the ball of paper with a bit of water; no more than a quarter of a cup. You can rub some dirt onto the paper before you do this; the mud will dirty and smudge the sheet.
3
Fill the hole with dirt. Make sure the paper is completely covered. The dirt will damage and wear out the paper over time, so you’ll need to ensure a snug fit.
4
Retrieve the paper after three to fourteen days. The amount of time you wait depends on how old you want the paper to look.

Printable Template

Old Paper Template

Expert Q&A

Question

How do you make paper look old without liquid?

Nicole Bolin
Crafts & DIY Specialist
Nicole Bolin is a Crafting Specialist and the CEO of Stencil, a DIY Craft Studio in Phoenix, Arizona. Nicole specializes in interior design and various craft and DIY projects. Nicole holds a Certificate in Interior Design from the New York Institute of Art and Design. She opened Stencil in 2017 to teach others to create DIY projects that fit their home and lifestyle.

Nicole Bolin

Crafts & DIY Specialist

Expert Answer

Besides using tea and coffee, you can crumple the paper up and singe the edges to make it look old.
Question

How do you make paper look old with fire?

Nicole Bolin
Crafts & DIY Specialist
Nicole Bolin is a Crafting Specialist and the CEO of Stencil, a DIY Craft Studio in Phoenix, Arizona. Nicole specializes in interior design and various craft and DIY projects. Nicole holds a Certificate in Interior Design from the New York Institute of Art and Design. She opened Stencil in 2017 to teach others to create DIY projects that fit their home and lifestyle.

Nicole Bolin

Crafts & DIY Specialist

Expert Answer

Hold a flame to the edges of the paper and singe them. Keep the fire moving around the paper, not letting it linger in one spot, which might set the paper on fire. Be careful to only burn the edges.
Question

What's the easiest method to make paper look old?

Community Answer

Mix one cup of water and one tablespoon of coffee and use a cotton ball to stain it. Let it dry and you are done.

Warnings

If you are using the Soaking Method, do not attempt to soak several pieces of paper at one time. The pages will stick together. Instead, soak your pages individually, using the same tea.

⧼thumbs_response⧽
Helpful 66 Not Helpful 20
Don't let the paper soak for too long, or it will begin to degrade.

⧼thumbs_response⧽
Helpful 50 Not Helpful 21
When baking, do not use a baking rack or anything that does not have a solid bottom with no holes, otherwise, you will have lighter markings where the baking rack is positioned.

⧼thumbs_response⧽
Helpful 10 Not Helpful 2
If there is writing on the paper, do not soak it in liquid if it is in ink, or it will spread and will become illegible. Use biro or pencil.

⧼thumbs_response⧽
Helpful 47 Not Helpful 24
Don't put your paper too close to a flame, or it will light on fire.

⧼thumbs_response⧽
Helpful 50 Not Helpful 28
If you are under 18, have an adult supervise you when you’re using fire.

⧼thumbs_response⧽
Helpful 22 Not Helpful 14