How to Kill Yucca Plants

Yucca plants are resilient perennial plants that develop complex and far-reaching root systems wherever they grow. Killing them can be a difficult and daunting task because they often reappear after they seem to be dead. By digging the plant out or applying herbicide routinely, you can kill yucca plants and ensure they won’t grow back.

Method 1
Method 1 of 2:

Digging Yucca Plants Out

  1. Image titled Kill Yucca Plants Step 1
    1
    Use a saw or pruning shears to cut the yucca down to its stump. Cut off all branches, stems, and shoots that come from the main stump. Depending on the size of the yucca, the root system might be pretty large. Having the stump isolated will make it easier for you to see where you need to begin digging.[1]
    • You can discard of the yucca with your yard clippings. Alternatively, there are plenty of household uses for yucca, including soap-making, basket-weaving, and cooking.
  2. Image titled Kill Yucca Plants Step 2
    2
    Dig a hole about 3 feet (0.91 m) around the base of the plant using a shovel. The root network for the yucca plant is very large, so you’ll want to start a hole that extends further than your stump. Set the boundaries by measuring from the center of the plant out to where your hole will start.[2]
    • If you don’t have much space around the yucca, digging might not be the best option for removal because it will require you to dig up other plants.
    Advertisement
  3. Image titled Kill Yucca Plants Step 3
    3
    Dig 3 to 4 feet (0.91 to 1.22 m) into the ground. Yucca roots can grow deep into the ground, and you’ll want to remove as many as possible as you’re digging. Work your way from the outer edge of the hole into the plant, and keep digging until you stop encountering roots.[3]
    • If you hit a root, do not cut it, simply dig around it until you can remove it with the plant. Cutting the root will make it more difficult to remove.
  4. Image titled Kill Yucca Plants Step 4
    4
    Check for additional roots and apply stump killer. Once the plant and roots are removed, inspect the hole and check if there are any more roots poking through the soil. If so, remove them to the best of your ability and apply stump killer, also known as potassium nitrate, to the soil near the roots.[4]
    • If you do apply stump killer, be aware that it will kill any plants in the surrounding areas. The soil will be ready for planting 2-3 months after applying the stump killer.
  5. Image titled Kill Yucca Plants Step 5
    5
    Leave the hole open for 2-3 weeks to allow the sun to dry the soil. Like many other plants, the yucca roots will dry out if exposed to sun. If you’ve missed any roots, leaving the hole open for a few weeks before replacing the soil will ensure that they dry out and die.[5]
    • For safety purposes, you might want to rope off the hole to prevent animals or children from tripping or falling into the hole and getting injured.
  6. Image titled Kill Yucca Plants Step 6
    6
    Monitor the area for new growth. Keep an eye on the area once you fill the hole back in. New growth can appear quickly, and you’ll want to dig up new shoots as soon as you see them.[6]
    • New growth can appear as late as a month after you refill the hole, so check back often and address new growth quickly by digging out the plant by its roots.
    7. Advertisement
Method 2
Method 2 of 2:

Applying Herbicide

  1. Image titled Kill Yucca Plants Step 7
    1
    Use pruning shears to cut the plant down to its stump. Remove as much of the plant as possible by cutting back its vegetation until only the stump remains. This will make it easier for the herbicide to work on the roots, which are the most important part to kill.[7]
    • It’s best to begin this process in the spring or summer, when the plant is still growing and not as hardy.
    • If the yucca is particularly large, it might be beneficial to use a saw to cut it down at the stump.
    • If using shears, start by removing the top and working your way down to the stump, cutting off large portions at a time.
  2. Image titled Kill Yucca Plants Step 8
    2
    Plan to apply herbicide during the spring, early summer, or fall. Controlling yucca with herbicide requires proper timing and application. Spring, early summer, and fall are the best times to apply herbicide because herbicides are most effective when used within a certain temperature range. Read the label of the product you purchase to decide when to spray.
  3. Image titled Kill Yucca Plants Step 9
    3
    Mix 19 ounces (540 g) of herbicide and 128 ounces (3,600 g) of diesel or vegetable oil in your sprayer. The recommended herbicide is Remedy herbicide, which is specifically formulated for yucca and other hardy plants, and you can find it at most hardware stores. Pour the herbicide in first and then add the diesel or vegetable oil.[8]
    • Make sure to wear protective clothing when handling chemicals, such as long sleeves and pants, chemical resistant gloves, and eye protection.
    • You can also buy pre-prepared mixtures of Remedy and diesel or vegetable oil, but they are more expensive and just as effective.
    • If your sprayer isn’t large enough to hold the volume of the mixture, you can make the mixture in a 256 ounces (7,300 g) bucket.
  4. Image titled Kill Yucca Plants Step 10
    4
    Transfer the mixture into the sprayer if you mixed in a different container. Use a funnel placed in the opening of the sprayer container to carefully pour the mixture into your sprayer. Be careful and pour slowly to avoid splashing or spilling the mixture.
    • If all of the mixture doesn’t fit into the sprayer, you can store the excess in the bucket for up to a week. Make sure you cover it with a lid, towel, or piece of cardboard to prevent contaminants from getting into the herbicide.
  5. Image titled Kill Yucca Plants Step 11
    5
    Attach the 5500-X1 nozzle to the sprayer. If your nozzle isn’t already attached, slip the 5500-X1 nozzle onto the tip of the sprayer. This nozzle will cause the mixture to be applied in a cone shape.[9]
    • Cone-shaped nozzles are great for applying herbicide because they allow for a more precise application, protecting the soil and other plants in your garden that you don’t want to harm.
  6. Image titled Kill Yucca Plants Step 12
    6
    Shake or stir the mixture vigorously for 15 seconds before spraying. Once the mixture is made, stir it with a paint stirrer or shake it in the container to ensure that the oil and herbicide are well-combined. This will prevent the herbicide from settling at the bottom of the container.[10]
    • If you won’t be using the mixture right after you make it, be sure to agitate it by shaking or stirring before use.
  7. Image titled Kill Yucca Plants Step 13
    7
    Spray the mixture onto the center of stump for 2 seconds. You can use a garden pump sprayer or backpack sprayer, both with the cone nozzle, to apply the mixture. Aim the nozzle at the very center of the stump and apply for 2 seconds. Count out loud to make sure that you’re applying the mixture for the full 2 seconds.[11]
    • Avoid spraying the mixture when the plant is wet. If it has rained the day of application, wait 24 hours for the plant to dry out completely.
  8. Image titled Kill Yucca Plants Step 14
    8
    Monitor the area weekly for new growth. New shoots might appear after the yucca seems to be dead, so keep an eye on the sprayed area. Cut down new shoots to their stump as they appear and apply the herbicide mixture to the stump immediately.[12]
    • You can re-apply this mixture as needed whenever you see new growth. It can take up to 2 months before you have completely killed the yucca.
    9. Advertisement

Expert Q&A
Did you know you can get expert answers for this article? Unlock expert answers by supporting wikiHow

  • Question
    I have a massive Yucca root bulb. The foliage has been cut down and will be treated with herbicide. How do I get the root bulb to rot away?
    Lauren Kurtz
    Lauren Kurtz
    Professional Gardener
    Lauren Kurtz is a Naturalist and Horticultural Specialist. Lauren has worked for Aurora, Colorado managing the Water-Wise Garden at Aurora Municipal Center for the Water Conservation Department. She earned a BA in Environmental and Sustainability Studies from Western Michigan University in 2014.
    Lauren Kurtz
    Lauren Kurtz
    Professional Gardener
    Expert Answer

    Support wikiHow by unlocking this expert answer.

    If you are treating with an herbicide, the root will die and rot away eventually. Manually remove the root if you want it gone sooner.
  • Question
    I dug down to the Yucca tree roots and tried to dig as many out as possible. Should I fill in the hole and place cardboard over the area or leave mulch on top?
    Lauren Kurtz
    Lauren Kurtz
    Professional Gardener
    Lauren Kurtz is a Naturalist and Horticultural Specialist. Lauren has worked for Aurora, Colorado managing the Water-Wise Garden at Aurora Municipal Center for the Water Conservation Department. She earned a BA in Environmental and Sustainability Studies from Western Michigan University in 2014.
    Lauren Kurtz
    Lauren Kurtz
    Professional Gardener
    Expert Answer

    Support wikiHow by unlocking this expert answer.

    It is best to leave the hole uncovered for at least 2 weeks to let the sun dry out the roots.
  • Question
    How do I kill other plants around my yucca plant?
    Community Answer
    Community Answer
    Prune, mow or pull undesired plants and cover the area with landscape fabric and rock or gravel groundcover.
Advertisement

Warnings

  • Avoid trying to kill the yucca with other invasive plants or bugs. This method is ineffective and can result in a bigger problem with even more plants and bugs to kill.
    ⧼thumbs_response⧽
  • Wear safety goggles and gloves when applying herbicide.
    ⧼thumbs_response⧽
Advertisement

Things You'll Need

Digging Yucca Plants Out

  • Saw or pruning shears
  • Shovel
  • Stump killer

Applying Herbicide

  • Saw or pruning shears
  • Herbicide, such as RoundUp or Remedy
  • Vegetable or diesel oil
  • Backpack or pump-up garden sprayer
  • 5500-X1 cone nozzle
  • Paint stirrer

You Might Also Like

Eat Yucca
How to
Eat Yucca
How to Kill and Remove a Tree Stump Yourself
Use Home Remedies to Get Rid of GnatsHow to Drive Away Gnats for Good: Easy DIY Methods
Remove Ants from Potted PlantsHow to Get Rid of Ant Nests in Potted Plants
How to
Kill Tree Roots
Kill a Tree
How to
Kill a Tree
Get Rid of a Beehive
How to
Get Rid of a Beehive
How to
Kill Bamboo
Get Rid of Gophers
How to
Get Rid of Gophers
Kill Vines
How to
Kill Vines
Get Rid of Ticks Around Your Home
How to
Get Rid of Ticks Around Your Home
Use a Weed Whacker
How to
Use a Weed Whacker
Treat Weeds in Artificial Grass
How to
Treat Weeds in Artificial Grass
Dig up Tree Roots
How to
Dig up Tree Roots
Advertisement

References

  1. ↑ http://www.lavendeandlemonade.com/2017/05/how-to-remove-yucca-organically-tested.html
  2. ↑ http://www.lavendeandlemonade.com/2017/05/how-to-remove-yucca-organically-tested.html
  3. ↑ http://www.lavendeandlemonade.com/2017/05/how-to-remove-yucca-organically-tested.html
  4. ↑ http://www.lavendeandlemonade.com/2017/05/how-to-remove-yucca-organically-tested.html
  5. ↑ http://www.lavendeandlemonade.com/2017/05/how-to-remove-yucca-organically-tested.html
  6. ↑ http://www.lavendeandlemonade.com/2017/05/how-to-remove-yucca-organically-tested.html
  7. ↑ http://baylor.agrilife.org/files/2011/05/bb_howtotaketheluckoutofyucca.pdf
  8. ↑ http://extensionpublications.unl.edu/assets/pdf/g2086.pdf
  9. ↑ http://extensionpublications.unl.edu/assets/pdf/g2086.pdf
  1. ↑ http://baylor.agrilife.org/files/2011/05/bb_howtotaketheluckoutofyucca.pdf
  2. ↑ http://baylor.agrilife.org/files/2011/05/bb_howtotaketheluckoutofyucca.pdf
  3. ↑ http://extensionpublications.unl.edu/assets/pdf/g2086.pdf

About This Article

Lauren Kurtz
Co-authored by:
Lauren Kurtz
Professional Gardener
This article was co-authored by Lauren Kurtz. Lauren Kurtz is a Naturalist and Horticultural Specialist. Lauren has worked for Aurora, Colorado managing the Water-Wise Garden at Aurora Municipal Center for the Water Conservation Department. She earned a BA in Environmental and Sustainability Studies from Western Michigan University in 2014. This article has been viewed 238,186 times.
57 votes - 91%
Co-authors: 11
Updated: May 6, 2021
Views: 238,186
Categories: Garden Pests and Weeds
Article SummaryX

To kill an unwanted yucca plant, use a saw or pruning shears to cut the plant down to its stump so you can more easily see where you need to begin digging. With the branches and stems removed, use a shovel to dig a hole about 3 feet around the stump and 3 to 4 feet deep into the ground to cover the yucca’s large root network. Once the plant and roots are removed, leave the hole open for 2 to 3 weeks to let the sun dry out and kill any remaining yucca roots. For tips from our Horticulture co-author on how to kill a yucca plant with herbicide, keep reading!

Did this summary help you?
Advertisement