Overgrowth of cattails is a common problem if you have a natural or manmade pond. Cattails are extremely invasive, and once they become established, they are very difficult to remove. There are two methods to remove cattails: manual and chemical removal.

Method 1
Method 1 of 2:

Manual Removal

  1. 1
    Dig up the cattails.[1] To get rid of cattails, you need to completely remove the root system. Cattails propagate through rhizomes. The rhizomes send out additional roots horizontally, quickly resulting in new plants. Manual removal is most effective if you dig out the rhizomes when cattails are first establishing themselves in a pond.
    • Dig down below the root system to remove the cattails. Dispose of the cattails.
    • Consider using a backhoe for manual removal if you need to remove a larger amount of cattail stands.
  2. Advertisement
Method 2
Method 2 of 2:

Chemical Removal

  1. 1
    Choose a chemical removal method.[2]
    • Look for an herbicide approved for aquatic use that includes one of the following active ingredients: glyphosate, imazamox, imazapyra or diquat. These chemicals are effective on cattails. Please note: The WHO considers glyphosate to be a probable human carcinogen. Its use is prohibited in some states and countries. Please check with your local laws and use caution if handling this chemical.
  2. 2
    Calculate the area and volume of your pond. These measurements are needed for you to determine how much herbicide you should use to kill your cattails.
    • Get the measurements for your pond. If a contractor put in the pond, you should be able to get the measurements from the contractor's office. Your local survey control service office may also have measurements available or aerial photos you can use to determine your pond's measurements. If not, get a survey of the pond or measure it yourself. Methods you can employ yourself without special equipment include chaining and pacing. Chaining involves putting a stake at either end of a measuring tape or length of wood, chain, or rope of known length. Place the stakes in the ground, remove them, and stick them back in the ground, this time, with the first stake in the same place where the second stake left a depression. Continue moving the measuring tape and stakes around the perimeter of the pond. Count the number of times you need to move the stake, and multiply this number by the length of the measuring tape to get the perimeter's measurement. Pacing functions in the same way, but the known length is your normal stride.
    • Calculate area. Determine the shape of your pond, whether it's roughly square, circular or triangular, and use the appropriate formula to solve for area.
    • Calculate volume. The volume of a pond is the area multiplied by the average depth of the pond. Take depth measurements by slowly dropping a weighted line into the water at various locations in the pond. Use the depth measurements you've obtained to calculate an average depth for the pond. The more measurements you take, the more accurate your average depth will be.
  3. 3
    Apply the herbicide to the cattails. It is best to use herbicides in the spring when growth first starts.[3] The cattail plants are smaller at this time, which makes application easier.
    • Read the directions on the herbicide container. Different formulas will have different water use restrictions. You need to familiarize yourself with these restrictions so you know when you can use the pond again for recreation or livestock use. The directions will also indicate how much herbicide to use based on the area and volume of your pond.
    • Divide the pond into sections if you have a large amount of cattails to remove. Once the herbicide takes effect, the decomposition of the dead cattails can deplete the dissolved oxygen levels in the pond, killing fish. Killing fewer cattails at once will reduce the amount of decomposing vegetation in the pond.
    • Use a pond or yard sprayer to distribute the chemical onto the cattails. Be careful to limit overspray as much as possible.
    • Wait 10 to 14 days before spraying the next section if you chose to spray your pond in sections. This will help keep the dissolved oxygen levels in the pond more stable.
  4. 4
    Cut down the dead cattails.[4]
    • Wait 10 to 12 days before cutting the cattails to allow the chemical enough time to work. You want to provide adequate time for the herbicide to fully kill the root system.
    • Use a weed whacker or sharp blade to cut down the cattails.
  5. 5
    Remove the dead cattails from the pond.
  6. Advertisement

Community Q&A

  • Question
    The cattails have been killed by chemicals and cut to the water line. How do I get stubs out of my pond?
    Community Answer
    Community Answer
    If your pond is shallow enough, you can use waders, go into the pond and easily pull the dead cattails out. Cattails grow in water that is 3 feet deep or less, so in most cases the water won't be too deep. Place them in a burn pile for the next burn season. If you don't have burn laws where you are, take them to the dump or slowly toss them for trash pickup.
  • Question
    My cattails are not in a pond. What's the best way to get rid of them?
    Community Answer
    Community Answer
    Spray vinegar on them with a spray bottle. They will soon dry up, but this is not a permanent solution until you cut them down afterwards.
  • Question
    Is it legal for me to remove cattails?
    Community Answer
    Community Answer
    While not legal to cut cattails on public land, you may do whatever you want on your own property.
Advertisement

Warnings

  • Although some people advocate cutting or mowing down cattails, this has not been proven effective.
    ⧼thumbs_response⧽
  • Pulling cattails out of the ground will not kill the root system. You must remove the rhizomes.
    ⧼thumbs_response⧽
Advertisement

Things You'll Need

  • Shovel and/or backhoe
  • Herbicide approved for aquatic use
  • Pond measuring devices
  • Pond or yard sprayer
  • Weed whacker or sharp blade

About This Article

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time. This article has been viewed 152,012 times.
77 votes - 81%
Co-authors: 7
Updated: February 5, 2023
Views: 152,012
Article SummaryX

If untreated, cattails can easily invade your pond, but you can get rid of them with a little effort. Use a shovel to dig up the root systems of the cattails. For larger amounts, rent a backhoe. Alternatively, you can spray the cattails with an herbicide containing glyphosate, imazamox, imazapyra or diquat. If you have a large amount of cattails to remove, divide your pond into sections and wait 10 to 14 days between applications. This will help keep the dissolved oxygen levels stable. After 10 days, cut the dead cattails out with a weed whacker or sharp blade and remove them from your pond. For more tips, including how to calculate the amount of herbicide you need for your pond, read on!

Did this summary help you?
Advertisement