This article was co-authored by Chad Zani. Chad Zani is the Director of Franchising at Detail Garage, an automotive detailing company with locations around the U.S. and Sweden. Chad is based in the Los Angeles, California area and uses his passion for auto detailing to teach others how to do so as he grows his company nationwide.
wikiHow marks an article as reader-approved once it receives enough positive feedback. In this case, 100% of readers who voted found the article helpful, earning it our reader-approved status.
This article has been viewed 168,349 times.
Seat belts are devices integral to the safety of anyone in a car. Yours also collects sweat from your skin, coffee spills, and food stains. Unfortunately, it is easy to forget the seat belt when cleaning the rest of the car, making stains, smells, and even mold growth commonplace. To clean your seat belt, hold the seat belt out at full extension, apply a light coating of cleaner, then allow the belt to air dry.
Steps
Doing General Cleaning
-
1Pull out the seat belt. Vigorously pull the belt forward until it is stiff and doesn’t move anymore. When this happens, the entire belt will be unspooled and much easier to reach.
-
2Place a clamp near the belt reel. Follow the belt strap upwards and locate the reel. This is where the majority of the belt is stored when not in use. Attach a metal clamp on the belt right next to the reel. The belt will be unable to retract back into the reel.[1]
- Metal clamps can be found at hardware stores.
Advertisement -
3Spray the belt with cleaner. An all-purpose cleaner or a fabric cleaner are safe to use on the belt to remove stains. These are purchased from a general store and come in spray bottles. All-purpose cleaners are designed for even delicate fabrics and should not have bleach in them. Spray all along the belt, creating a light, even coating. Don’t forget the underside.[2] [3]
- A mixture of equal parts of a gentle, neutral pH detergent such as Dawn dish soap or a baby wash and water can be used as a cleaner instead.[4]
- Vinegar and vinegar-based cleaners are useful for removing smells, but vinegar is an acid and too much of it can damage the belt’s integrity over time. Use baby wipes and delicate fabric cleaners instead.
-
4
-
5
-
6Let the belt dry. Leave the belt alone for at least overnight. If it isn’t completely dry, leave it for longer. It’s important to make sure the belt is dry before you unclamp it and let it retract so that mold doesn’t grow on it.
Treating Difficult Stains
-
1Mix detergent and water. Fill a small cup of warm water. Add three cups of a gentle dish soap or all-purpose cleaner. Don’t use one that has bleach or vinegar, since the acid can damage the belt. Most stains can be handled by detergent or fabric cleaner no matter the origin. You don’t have many options for cleaners because they are too harsh for the seat belt.[9]
-
2Dip a stiff-bristle brush into the mixture. Dip the bristles of the brush into the bowl to pick up some of the cleaner. Minimize the amount of moisture on the brush as much as possible to avoid soaking the seat belt.
-
3Scrub the stain. Move downwards from the top of the stain. Be careful not to move the brush in a circle or go back up the belt. Scrub the stain gently, adding small amounts of cleaner when necessary to apply a light, even coating.
-
4Use a steam machine. For truly stubborn stains, you or a professional can use a steam machine or hot water extractor. Once you’ve added a coating of fabric cleaner or upholstery shampoo, run the machine over the belt on a low moisture setting.[10]
Removing Mold and Odors
-
1Pull out the seat belt. Again, gently tug the belt forward until it is completely unspooled. This will allow you to identify any mold spores and reach the entirety of the belt to remove odors.
-
2Place a clamp near the belt reel. Find the reel where the belt spools when not in use. Place the metal clamp on the belt next to the reel. The belt will no longer be able to retract.
-
3Mix cleaner in a bowl. Pour about one tablespoon (15 mL) of a non-bleach dish soap into a cup (240 mL) of warm water. Add two tablespoons (30 mL) of vinegar. Stir the mixture until soapy.[11]
-
4Scrub the belt. Use a soft-bristled brush to gently work in the cleaner. Dip it in the mixture and move it downwards from the top of the belt. Don’t move the brush in circles or go back upwards. Do this to apply a small, even coating that won’t wear out the belt’s threads.[12]
-
5Blot the seat belt with a microfiber towel. Use a dry microfiber towel in order to avoid adding moisture that can damage the integrity of the belt’s threads. Squeeze the belt between the towel and gently move up and down to remove excess moisture.
- For recurrent mold issues, spray on a mold preventative such as Concrobium Mold Control or Mold Armor while the belt is still damp. Try to choose one that doesn’t have bleach in the ingredient list.
-
6Air dry the belt. Leave the belt overnight or until dry. It must be completely dry before you remove the clamp or else the wet belt will provide ample breeding ground for mold and nasty odors inside the reel.[13]
Expert Q&A
-
QuestionHow do I get coffee out of a seat belt?Chad ZaniChad Zani is the Director of Franchising at Detail Garage, an automotive detailing company with locations around the U.S. and Sweden. Chad is based in the Los Angeles, California area and uses his passion for auto detailing to teach others how to do so as he grows his company nationwide.
Auto Detailing ExpertSpray a cleaning solution straight onto the seatbelt, then scrub it vigorously with a microfiber cloth. You can also use a medium-strength brush, but be gentle with the pressure, or the seatbelt will start to fray and look shabby. -
QuestionCan I use tissue paper instead of the micro fiber towel?Community AnswerNo. Tissue paper is thinner than the towel, and therefore its use isn’t advised to clean a seat belt.
-
QuestionCould I use tissue paper instead of the "micro molecule" thing?Community AnswerIt is not advised, as tissue paper could break up and affix to your seat belt, making it appear dirtier than before.
Warnings
- Mold spores can be dangerous. Consider wearing a mask when treating your car for mold.⧼thumbs_response⧽
References
- ↑ http://www.home-ec101.com/theres-mildew-on-my-seatbelts-what-do-i-do/
- ↑ Chris Parker. Founder, Parker Eco Pest Control. Expert Interview. 16 February 2021.
- ↑ http://www.ecotouch.net/blog/how-to-clean-seat-belts/
- ↑ http://csftl.org/clean-my-car-seat/
- ↑ Chris Parker. Founder, Parker Eco Pest Control. Expert Interview. 16 February 2021.
- ↑ http://www.autoblog.com/article/how-to-clean-seat-belts-autoblog-details/
- ↑ Chris Parker. Founder, Parker Eco Pest Control. Expert Interview. 16 February 2021.
- ↑ http://www.ecotouch.net/blog/how-to-clean-seat-belts/
- ↑ http://www.autoblog.com/article/how-to-clean-seat-belts-autoblog-details/
- ↑ http://www.ecotouch.net/blog/how-to-clean-seat-belts/
- ↑ http://www.autoblog.com/article/how-to-clean-seat-belts-autoblog-details/
- ↑ http://www.home-ec101.com/theres-mildew-on-my-seatbelts-what-do-i-do/
- ↑ https://www.autoguide.com/auto-news/2016/11/have-mold-in-your-car-here-s-how-to-get-rid-of-it.html
About This Article
To clean a seatbelt, start by pulling it all the way out and placing a metal clamp near the belt reel to hold the seatbelt in place. Then, spray the seatbelt on both sides with an all-purpose cleaner, or use water mixed with dish soap instead. Once you've coated the seatbelt, begin scrubbing it from the top downwards with a stiff-bristled brush. If you're having difficulty removing a stain, add more cleaning product to your brush and scrub the area. Finally, wipe the seatbelt from top to bottom with a microfiber towel. For tips on how to use a steam machine to remove stubborn stains, read on!