Silver is a common metal used in jewelry or dinnerware. If you don’t have any chemical cleaner, you can use Coca-Cola, or Coke, as a simple cleaning substitute for sterling or plated silver. The acid in Coke works to cut through any grime or rust on the silver’s surface. Once you soak the silver in cola, you can have a piece that looks good and new!

Part 1
Part 1 of 2:

Soaking the Silver

  1. 1
    Put the silver piece in a bowl or container. Use a container large enough to hold the silver piece you’re cleaning. Make sure it’s deep enough so you can submerge the silver completely. Lay the silver on the bottom of the container.[1]
  2. 2
    Pour the Coke into the container until the silver is submerged. Make sure the silver is completely covered with the Coke. It doesn’t matter whether you use regular or Diet Coke.[2]
    • Substitute any carbonated cola if you don’t have Coke.
    Advertisement
  3. 3
    Let the silver soak for 1 hour. Leave the silver in the Coke undisturbed. The acid in the Coke will help loosen any grime and residue from the silver. If you want to leave the silver in the Coke to clean it longer, keep it submerged for up to 3 hours.[3]
    • Check on the silver every 30 minutes to see how clean it is.
  4. Advertisement
Part 2
Part 2 of 2:

Cleaning off the Coke

  1. 1
    Take the silver out of the Coke. Use a pair of tongs if you don’t want to get Coke on your fingers. Grab the silver and shake off any excess Coke back into the container. Set the silver on a piece of paper towel or on the table.[4]
  2. 2
    Use a toothbrush to scrub any remaining residue. Work a soft-bristled toothbrush in tight circles across your piece of silver. This helps scrape off any loosened tarnish or grime that didn’t come off with the Coke.[5]
    • Use a jewelry brush if you don’t have a spare toothbrush.
  3. 3
    Rinse the silver under clean water. Run the silver under the faucet with cool, clean water or soak it in a container full of water. Shake off the excess water so the silver isn’t wet.[6]
    • Put a small piece of silver in a water bottle and shake it to rinse it.
  4. 4
    Dry the silver off with a paper towel. As soon as you pull the silver out of the water, dry it off to prevent any tarnish or rust. Make sure it’s completely dry before putting it away again.[7]
  5. 5
    Polish the silver with mild dish soap. Mix a few drops of mild dish soap in warm water. Dip a soft cloth into the soapy water and rub the silver clean. Rinse the silver with cold water and buff it dry.[8]
  6. Advertisement

Community Q&A

  • Question
    Does the Coke damage the coins? I have a really grimy old coin at my house that I want to make clean and shiny, but I don't want my old coin getting damaged from the Coke.
    Community Answer
    Community Answer
    As long as you do not scrub the coin, the Coke will not damage it.
  • Question
    I have a 1929 1/4oz .999 fine silver Indian incuse ring and I am wondering if this is safe for it?
    Community Answer
    Community Answer
    It could go wrong trying to do it yourself, so it would be best to take it to an experienced jeweler.
  • Question
    Does this actually work?
    Community Answer
    Community Answer
    Yes it does work! But it is not recommended that you do it on expensive jewellery.
Advertisement

Warnings

Advertisement

Things You’ll Need

  • Bowl or container
  • Coke
  • Toothbrush
  • Paper towel

About This Article

Hunter Rising
Co-authored by:
wikiHow Staff Writer
This article was co-authored by wikiHow staff writer, Hunter Rising. Hunter Rising is a wikiHow Staff Writer based in Los Angeles. He has more than three years of experience writing for and working with wikiHow. Hunter holds a BFA in Entertainment Design from the University of Wisconsin - Stout and a Minor in English Writing. This article has been viewed 144,962 times.
9 votes - 98%
Co-authors: 5
Updated: February 21, 2022
Views: 144,962
Categories: Cleaning Metals
Article SummaryX

To use Coke as a simple cleaning substitute for your sterling or plated silver, start by putting your silver in a bowl or container and pouring the Coke over it. Once your silver is fully submerged, allow it to soak for 1 hour to loosen any grime and residue. After you remove your silver from the Coke, scrub away any remaining residue with a toothbrush and rinse it with clean water. Dry your silver off with a paper towel, then polish it with a mixture of warm water and dish soap. To learn how to buff your silver after polishing it, keep reading!

Did this summary help you?
Advertisement