Whether you’re dealing with cooking oil, motor oil, or anything in between, cleaning the greasy substance off your floors can be a pain. Thankfully, there are a few household substances you can use to absorb oil on your floor and make cleanup much easier. We’ve answered some of your questions about cleaning oil off the floor so you can make your home shine like new again.

Question 2 of 7:

How do you clean oil off carpet?

  1. 1
    Sprinkle baking soda or cornstarch over the area. Both of these substances will absorb the excess oil and make it easier to clean. If you don’t have either on hand, you can also use kitty litter.[3]
  2. 2
    Let the mixture sit for 15 minutes, then vacuum the area. Your absorbing substance will have soaked up the majority of the oil and grease. Carefully run your vacuum over the area, going slowly so you don’t push the oil back into the carpet.[4]
  3. 3
    Blot the stain with detergent and white vinegar. If the stain isn’t quite gone, mix 1 US tbsp (15 mL) of dishwashing detergent with 1 US tbsp (15 mL) of white vinegar and 2 cups (470 mL) of warm water. Use a clean cloth to blot the mixture onto the area, then rinse it with cool water.[5]
  4. Advertisement
Question 3 of 7:

How do you clean oil off hardwood?

  1. 1
    Apply Fuller’s Earth to the oily area. Fuller’s Earth is a clay product that soaks up oil fast without damaging your hardwood. Buy it at the hardware store and sprinkle a thin layer over the oily area.[6]
  2. 2
    Wait for 15 minutes, then scrape up the paste. Grab a butter knife or a pallet knife and gently scrape the paste up, being careful not to gouge your floors. Scrape the paste into the garbage to get rid of the majority of the oil.[7]
  3. Advertisement
Question 4 of 7:

How do you clean oil off concrete?

  1. 1
    Sprinkle baking soda or kitty litter on the oil. It will absorb the excess oil and make the area much easier to clean. Make sure the entire oil patch is covered to make the most out of your cleaning supplies.[8]
  2. 2
    Wait for around 1 hour. Give the baking soda or kitty litter time to work. Leave the area be and let the oil soak in. For a super large stain, you might want to let it sit overnight.[9]
  3. 3
    Sweep the area. Grab a stiff broom and sweep the baking soda or kitty litter into a garbage bag. If any baking soda or kitty litter residue is left, rinse the area with clean water.[10]
  4. Advertisement
Question 5 of 7:

How do you remove tough oil stains from concrete?

  1. 1
    Spray a degreaser over the area. Head to the hardware store and grab an industrial-strength degreaser to tackle tough stains. Spray the degreaser over the entire stain to lift up the ingrained grease, then use a nylon brush to scrub it.[11]
  2. 2
    Apply TSP to the area. Put on goggles and gloves to protect your skin and your eyes. Mix 1 part of Trisodium Phosphate (TSP) to 6 parts of water. Apply it to the stain, then let it dry for at least 20 hours. When it’s dry, sweep it away to remove the oil stain.[12]
  3. Advertisement

Warnings

  • If you’re going to use TSP as a cleaner, read the manufacturer’s instructions and safety labels before you start.[15]
    ⧼thumbs_response⧽
  • Be extra careful with vinegar, since it can eat up the finish of your flooring.
    ⧼thumbs_response⧽
Advertisement

About This Article

Susan Stocker
Co-authored by:
Green Cleaning Expert
This article was co-authored by Susan Stocker and by wikiHow staff writer, Hannah Madden. Susan Stocker runs and owns Susan’s Green Cleaning, the #1 Green Cleaning Company in Seattle. She is well known in the region for outstanding customer service protocols — winning the 2017 Better Business Torch Award for Ethics & Integrity —and her energetic support of green cleaning practices. This article has been viewed 49,601 times.
1 votes - 100%
Co-authors: 4
Updated: March 17, 2023
Views: 49,601
Categories: Floors and Stairs
Advertisement