How to Type on a Typewriter

Type text with the typewriter keys.^[6] The vast majority of your experience with a typewriter will involve typing your desired text onto the page. Typing on a typewriter requires more force than a computer. You should try to keep your touch on the keys short but firm.

• One good way of approaching typing is to imagine the keys are hot to the touch. Don't press them down for too long, and keep your movement from key to key fluid.^[7]

Keep your typing force consistent.^[8] With manual typewriters, the action is completely hand-powered. This means that the intensity of the type on the page will depend on the force of your key pressing. Although it may be difficult at first if you're used to typing on a computer, make an effort to keep the force of your key pressings consistent and firm.

Press the carriage return lever when the bell sounds.^[9] When you type to the end of a row, there should be a bell indicating the typewriter needs to be reset. To do this, take the carriage return and slide it back to the other end. This simple process will be done each time you get to the end of another line.

• Roll the paper up a notch for the next line of text. Electric typewriters do this automatically.
• Replace the page with another blank sheet when you're done with it.

Erase mistakes.^[10] Chances are high you will make mistakes while using a typewriter. There are different ways to go about erasing mistakes, depending on the form of typewriter you're using. If you have a mechanical typewriter, you'll have to apply white-out eraser manually to the mistakes. Electric typewriters often come equipped with a second ribbon of white-out eraser to blot out mistakes. The best way to contend with typewriting mistakes is to avoid them altogether. Type with greater care than you would on a computer.

• A common trick for rubbing out mistakes is to backpedal over the unwanted text and type a row of x's atop them.
• If there are significant issues on a page, it may be prudent to start the page over and copy the good material over again.

Create a rough draft first. Because there is such difficulty in correcting mistakes on a typewriter, it's common form for users to make a rough draft copy before moving on to the real thing. Write your first draft and keep changes you want to make in mind when you write subsequent drafts. Draft your work one page at a time. This will help ensure proper sequence between pages, reducing the risk of getting your pages mixed up.

Keep your typewriter covered when not in use.^[11] Although many typewriter users enjoy the look of a typewriter, it's nonetheless a good idea to keep it covered up with a cloth. This will reduce the amount of dust getting trapped under the keys. If you're insistent on keeping the typewriter unveiled, you should prepare to dust and clean it a lot more than you normally would.

• If you own a typewriter purely for decoration, you won't need to guard it as such.

Dust your typewriter regularly.^[12] Dust tends to slip under the typewriter keys. Especially if your typewriter is a manual model, this will negatively affect its efficiency. Make a regular habit of dusting your typewriter at least once a month. Make an effort to get between the cracks in the keys and sweep out any dust that may have accumulated.

Release the paper when you're finished using it.^[13] Forgetting to reset the paper release after use is a common mistake by typewriter users. Leaving the paper release on causes undue pressure which can result in a lasting imprint. Bring the paper release lever forward whenever you're not using the typewriter.

Check your typewriter's manual. If you've purchased a typewriter new, it should come with an instruction manual. Whenever you're in doubt, you should refer to the manual. It will offer guidance specific to that model, and should offer a clear step-by-step process on how to use it.

• Checking your model's warranty status is helpful if there are any issues with the product.

Store your typewriter somewhere dry and temperate.^[14] Typewriters are usually fine to keep around in an office space for the long-term. However, if you're storing one, it's important to keep it somewhere where it won't be too hot or cold. Extremes in temperature will warp the parts and affect the rubber in the machine. Excessive moisture can also ruin the machine.

• If you're boxing the typewriter, make sure to coat it in bubble wrap.^[15]