This article was co-authored by Isaac Hess. Isaac Hess is a Baseball Coach, Instructor, and the Founder of MADE Baseball Development and Champion Mindset Training Program, a baseball training program based in Los Angeles, California. Isaac has over 14 years of experience coaching baseball and specializes in private lessons and tournaments. He has played baseball for both professional and collegiate leagues including Washington State University and the University of Arizona. Isaac was ranked as one of Baseball America's top 10 prospects for 2007 and 2008. He earned a BS in Regional Development from the University of Arizona in 2007.
This article has been viewed 218,662 times.
Purchasing a baseball glove can be an investment because well-made gloves are expensive. There are ways to extend the life of your baseball glove to make your investment last longer. Adding oil to your baseball glove will not only help you break in your glove more quickly by softening the leather, it also will lubricate your glove to prevent it from cracking.[1]
Steps
Oiling a New Glove
-
1Look for the right oils. Baseball gloves are made of leather, so you’ll want oils and products that are specifically made for leather. The glove manufacturer will probably offer recommendations for oils and conditioners that will work well with their product, which you should be able to purchase at a sporting goods store.
-
2Work the oil into the leather. Put a little bit of oil into the pocket, the areas between your thumb and forefinger where you catch balls, and rub it in so that you get a light coating. Make sure there are no globs of oil or other liquids left.[2]
- If you don’t want to just use your hands, a soft, clean cloth is a good idea. Put a small amount into a clean dish towel, and rub that into the glove.[3]
Advertisement -
3Let your glove dry. Let the glove sit overnight in order for the oil to fully soak into the leather. Make sure it stays in a cool, dry place. The next morning, wipe the glove dry to remove any remaining oil.[4]
-
4Form the pocket. This is the last step to breaking in a glove. The best way to do this is by playing catch for a few minutes every day for a few weeks. This will help make the glove form better to your hand, and give you the comfort you want while playing.[5]
- There are a few other popular methods for making a pocket. Place a baseball or softball into the pocket and tie the glove shut, repeating that process every night after giving it some use. Alternatively, use a hammer to pound the pocket in.
Cleaning Your Glove
-
1Clean your glove after use. Once you are done for the day, either in a game or just playing catch, wipe down the glove with a clean rag. Get rid of any dirt or debris on it, and store in a cool, dry place daily.[6]
-
2Apply a little leather cleaner. To give your glove a better clean, put a little bit of cleaner on a damp cloth or sponge. Make sure you wipe the entire glove with the cleaner. This includes parts other than the pocket, including the laces and webbing.[7]
- Make sure you use the right kinds of leather cleaners. Look for designated baseball glove leather cleaners, or products recommended by the manufacturer. Avoid oil conditioners like linseed oil, mink oil, neatsfoot oil, silicon, or petroleum-based products.
- Keep your application light. Too much cleaner, or applying it too often, will cause the leather to break down faster.
- You probably want to do this once a year to help keep your glove lasting for a long time.
-
3Dry off the glove. Use a damp cloth or sponge to wipe off any remaining oil. Then let your glove air dry overnight. Make sure you find a cool, dry place for your glove to sit, which means not in your gym or bat bag.[8]
- The leather will be a bit stiff after drying, but some regular use should soften it up again quickly.
Avoiding Mistakes
-
1
-
2Avoid products not approved for leather. Remember that your glove is made of leather, a specific kind of material. Not all oils are good on leather, and because it is a common material, they will usually say so on the label. Using these oils will break down the material and cause your glove to deteriorate faster.
-
3Use cool, dry air on your glove. Keep your glove in a cool, dry place when you are done oiling. Do not use a blow dryer, furnace, or dryer to dry it off. The extra heat will damage the glove, especially since you’ll be letting it sit overnight and not carefully watching it.[11]
-
4Keep it out of the microwave. Cooking your glove in a microwave is a good way to dry out the leather, making the laces brittle and more likely to break. You can also start a fire if you aren’t watching carefully. Some gloves have metal parts in them as well, which create sparks that will catch fire and damage your microwave.
- This goes for other heating methods like ovens or your car. While your glove probably won’t catch fire sitting on the dashboard, it will still dry out and become brittle.
Expert Q&A
Did you know you can get expert answers for this article?
Unlock expert answers by supporting wikiHow
-
QuestionHow do you break in a baseball glove?Isaac HessIsaac Hess is a Baseball Coach, Instructor, and the Founder of MADE Baseball Development and Champion Mindset Training Program, a baseball training program based in Los Angeles, California. Isaac has over 14 years of experience coaching baseball and specializes in private lessons and tournaments. He has played baseball for both professional and collegiate leagues including Washington State University and the University of Arizona. Isaac was ranked as one of Baseball America's top 10 prospects for 2007 and 2008. He earned a BS in Regional Development from the University of Arizona in 2007.
Baseball Coach & Instructor -
QuestionShould I oil my baseball glove?Isaac HessIsaac Hess is a Baseball Coach, Instructor, and the Founder of MADE Baseball Development and Champion Mindset Training Program, a baseball training program based in Los Angeles, California. Isaac has over 14 years of experience coaching baseball and specializes in private lessons and tournaments. He has played baseball for both professional and collegiate leagues including Washington State University and the University of Arizona. Isaac was ranked as one of Baseball America's top 10 prospects for 2007 and 2008. He earned a BS in Regional Development from the University of Arizona in 2007.
Baseball Coach & Instructor -
QuestionDo I have to oil the glove completely?Community AnswerNo, you just need to focus on the pocket on both sides, the laces, and the fingers.
References
- ↑ Isaac Hess. Baseball Coach & Instructor. Expert Interview. 20 March 2020.
- ↑ http://www.artofmanliness.com/2009/04/19/how-to-break-in-a-baseball-glove/
- ↑ http://www.hksportsfields.com/break-in-your-glove/
- ↑ http://www.hksportsfields.com/break-in-your-glove/
- ↑ http://www.artofmanliness.com/2009/04/19/how-to-break-in-a-baseball-glove/
- ↑ http://baseball.epicsports.com/how-to-care-for-a-baseball-glove.html
- ↑ http://baseball.epicsports.com/how-to-care-for-a-baseball-glove.html
- ↑ http://baseball.epicsports.com/how-to-care-for-a-baseball-glove.html
- ↑ Isaac Hess. Baseball Coach & Instructor. Expert Interview. 20 March 2020.
About This Article
To oil a baseball glove, you'll need oil that's made specifically for leather, or some baby oil, petroleum jelly, or shaving cream. Once you have an oil to work with, rub it into the pocket of your glove, or the area between the thumb and forefinger, so it has a light coat of oil on it. Then, let your glove dry overnight, wiping off any remaining oil in the morning. Finally, use your glove to play catch every day for a few weeks to help break in the glove and form a pocket. To learn how to clean your baseball glove, scroll down!