How to Play Baseball

Baseball is one of America's most beloved and iconic sports. For those new to the game, the rules can seem confusing and complicated. But once you understand how to set up the field, how to play offense, and how to play defense, you can join or start a baseball game of your own.

Part 1
Part 1 of 4:

Team Setup

  1. Image titled Play Baseball Step 1
    1
    Gather nine players. You will need at least nine people to be able to field a team for defense. It is possible to play with fewer people, but you'll need to expand each player's coverage on the field. This may make it difficult for players to reach the ball after it's hit though, so get as close to nine as possible.[1]
  2. Image titled Play Baseball Step 2
    2
    Assign the pitcher and catcher. The pitcher is the player who stands in the middle of the field and throws the ball to the batter. The catcher will be squatting just behind the batter at home plate to catch the ball if the batter doesn't hit it.[2]
    • Make sure the catcher wears protective gear, like a face mask, since the pitcher will be throwing balls hard and fast enough to injure them.
    Advertisement
  3. Image titled Play Baseball Step 3
    3
    Select the infielders. The players in the infield (or the diamond) protect the bases. There should be a player stationed at first, second, and third base, and they will be referred to as "basemen." Make a fourth player the shortstop, which is a roving position that backs up the the basemen and helps catch balls in the infield.[3]
  4. Image titled Play Baseball Step 4
    4
    Choose the outfielders. The three players in the outfield are the right fielder, center fielder, and left fielder. They're responsible for catching fly balls in the outfield and chasing down ground balls that make it past the infield.[4]
    5. Advertisement
Part 2
Part 2 of 4:

Field Setup

  1. Image titled Play Baseball Step 5
    1
    Place the bases on the field. There are four bases (first, second, third, and home plate), which are “safe spots” for runners during the game. They’re canvas or rubber-covered bags set up in a square, though it’s more commonly referred to as a diamond.[5]
    • Bases are numbered counterclockwise from home plate: first, second, and third. Second base is on a direct line from home plate through the pitcher's mound.
    • Each base is approximately 90 feet (27.5 meters) away from the previous one.
    • The lines that connect the bases are made of dirt, so that runners may slide into bases, while the rest of the field is made of grass.
  2. Image titled Play Baseball Step 6
    2
    Set up the pitcher’s mound. The pitcher stands on a mound of dirt in the center on the diamond, approximately 60 feet (18 meters) from home plate. On the mound, place a small rubber plate, where the pitcher will throw from.[6]
  3. Image titled Play Baseball Step 7
    3
    Paint the foul lines. A baseball that's hit and lands to the left of third base or the right of first base (as seen from home plate) is considered a “foul ball,” which invalidates the play. The foul lines extend from home plate out to the first and third bases, and then beyond into the outfield.[7]
  4. Image titled Play Baseball Step 8
    4
    Paint the batter’s boxes. The batter stands either on the left side of home plate or the right side, depending on which is their dominant hand. Paint a 4-foot by 6-foot (1.2 meters by 1.8 meters) box on both sides of home plate.[8]
  5. Image titled Play Baseball Step 9
    5
    Paint the catcher’s box. Just behind home plate, paint a small box where the catcher and umpire (an impartial judge) will squat or stand and watch the ball after the pitcher throws it.
    6. Advertisement
Part 3
Part 3 of 4:

Offensive Play

  1. Image titled Play Baseball Step 10
    1
    Send a batter to the plate. A batter will approach home plate and stand to the side of it in one of the batter’s boxes, waiting for the pitcher to throw the ball. Batters may take practice swings until the pitcher is ready to begin.[9]
    • During offensive play, all players act as batters, taking turns trying to hit the ball.
  2. Image titled Play Baseball Step 11
    2
    Watch the ball as it’s pitched. The batter must try to predict whether the ball will be hittable. They can decide whether to swing and attempt to hit the ball, or to not swing, and allow the catcher behind them to catch it. If a legal hit is not made, the umpire will make one of three calls – a strike, a ball, or a foul ball.[10]
    • A “strike” is an indication that the batter either could have swung at the ball and didn't, or swung at the ball and missed. The batter is out on a third strike that is caught by the catcher.
    • A “ball” happens when the pitcher pitches a ball that's too far outside the hitting area to be considered hittable by the batter and the batter did not swing at the pitch. After four balls, the batter “walks,” which is a free advancement to first base. Batters will occasionally try to crowd the plate and earn a walk rather than hit the ball.
    • A “foul ball” is a ball that the batter hits which lands outside the foul lines or goes into foul territory before reaching first or third base. The ball is then considered "dead," and all runners must return to their time-of-pitch base without any liability of being put out. Usually a foul ball just counts as a strike; however, in most cases, a foul does not count as a strike if there are already two strikes against the batter. Exceptions are if the batter foul-tips the ball into the catcher's glove or bunts it foul.
  3. Image titled Play Baseball Step 12
    3
    Swing the bat. While standing with your feet parallel and knees slightly bent, hold the bat upright at the base with two hands. Swiftly bring it forward in a fluid motion, and at the same time, shift your weight from your back foot to your front foot. Don’t forget to keep your eye on the ball to increase your chances of making contact.[11]
  4. Image titled Play Baseball Step 13
    4
    Run the bases. While the hit ball is moving across the field, either through the air or along the ground, the batter (who is now called the “runner”) drops the bat and runs as fast as possible towards first base. As long as the runner doesn't get an “out,” they can stop at first base, or keep going until it's no longer safe.[12]
    • A runner can be tagged out if a defensive player has possession of the ball and touches the runner who is not touching a base (and has not overrun first base).
    • The batter will automatically be called out if the hit ball is caught by a defensive player before it touches the ground or wall. This is called a flyout. If this is not the third out of the inning, all baserunners must return to their time-of-pitch-base after a flyout. Such runners can be "doubled off" by throwing the ball back to the base that must be reached.
    • A batter can get forced out if the hit ball touches the ground, but then a defensive player gets possession of it and touches first base before the runner can get there. Runners who are "forced" to vacate their base on a ground ball can also be forced out in this manner.
  5. Image titled Play Baseball Step 14
    5
    Steal bases. In most instances, the runner won't be able to complete an entire circuit of the bases on a single play, so they must stop at a base and wait for the next batter to step up to the plate. However, at any time, the runner may attempt to “steal” the next base by running to it as soon as the pitcher has pitched to the batter.[13]
    • Since the pitcher is usually the best thrower on the team, stealing a base at any other time is very dangerous; the pitcher can turn and throw the ball to a baseman instead of the batter, allowing an easy tag out. Many youth baseball leagues do not permit base stealing until after the ball has crossed home plate.
  6. Image titled Play Baseball Step 15
    6
    Load bases. Only one runner is allowed on each base at any time. When all three bases have a runner, the offensive team is said to have the “bases loaded,” meaning the next fair hit or walk will necessarily result in either a run or an out.
  7. Image titled Play Baseball Step 16
    7
    Hit a home run. Sometimes, the batter hits the ball so hard or so well that they are able to run around the entire diamond before getting an out, scoring a run on the first hit. This is called a “home run.” Most home runs are the result of the ball being hit past the fence at the back of the outfield, at which point it's completely out of play and all the fielding team can do is watch.[14]
    • A home run hit while the bases are loaded is called a “grand slam,” which will score four runs (one for each runner). While rare, grand slams can turn the tide of a difficult game or virtually guarantee victory.
  8. Image titled Play Baseball Step 17
    8
    Drive forward with regular plays. Home runs are fun, but not common enough to be relied upon as a means of winning the game. Instead, focus on learning how far to run after a normal hit. By knowing when to stop and wait, you can stay in play longer and raise your chances of scoring a run.
  9. Image titled Play Baseball Step 18
    9
    Avoid getting three “outs.” Once three batters/runners have gotten outs, the game shifts, with the defense and offense switching places. While you’re the defense team, you will not be able to score any runs.
    • The game has nine periods, called innings. They’re each comprised of two parts: a “top” and a “bottom.” When the offense of one team has received three outs, the game moves either to the bottom of the current inning or the top of the next one.[15]
    • A run scores for the offensive team whenever a runner safely advances to home plate. A run will not count if: 1) the runner at home plate was not at the time-of-pitch base during or after a flyout; 2) the runner touched home plate after the defensive team recorded a third out; or 3) the runner reached home plate during the same continuous playing action as a force out for the third out, even if home plate was reached before this out was recorded.
    10. Advertisement
Part 4
Part 4 of 4:

Defensive Play

  1. Image titled Play Baseball Step 19
    1
    Pitch the ball. The pitchers will stand on the pitcher’s mound and throw the ball toward the hitter, attempting to get an out. Pitchers often use fastballs, curveballs, changeups, and sliders to confound batters.[16]
    • The fastball is what it sounds like – very fast – as is the curveball.
    • A changeup involves the pitcher pretending to throw a fastball but actually throwing a much slower pitch, confusing the batter's sense of timing.
  2. Image titled Play Baseball Step 20
    2
    Try to catch the ball after it’s hit. Once the batter hits the ball, it will either fly through the air or it will roll along the ground. The defensive team, which is spread out across the infield and the outfield (the grass beyond the diamond), will attempt to catch the ball before it hits the ground. This automatically gives the batter an out and they can’t proceed to run the bases.[17]
    • If the ball hits the ground before anyone catches it, the defensive players must get to it quickly and pass it to any teammate close enough to tag or force a runner out.
  3. Image titled Play Baseball Step 21
    3
    Try to tag runners out. As long as they have the ball in hand, a defensive player can tag a runner as they are circling the bases, and the runner will then be out. Or a baseman (the person in charge of guarding a base) can catch a passed ball and step one foot on the base in order to get an out for a forced runner who was approaching that base.[18]
  4. Image titled Play Baseball Step 22
    4
    Get multiple runners out at once. When the field is set up just right, the fielders may be able to pull off a double play or even a triple play, in which they get two or three outs on a single play.[19]
    • Triple plays are rare but sometimes possible on line drive flyouts, or if enough force outs are available.
    • Double plays are more common, and they often involve forcing out a runner at second base and then forcing out the batter before they reach first.
  5. Image titled Play Baseball Step 23
    5
    Keep playing until the correct number of innings is reached. As opposed to basketball and many other team sports, baseball doesn't have a clock or timer. Instead, the game is played until all the innings are completed. At the end of the last inning, whichever team scored the most runs wins.[20]
    • Because this can make games drag on for a long time, teams are allowed to have alternates, particularly extra pitchers (called relief pitchers) to keep play fresh from beginning to end.
    • If the teams are tied at the end of the last inning, an extra inning is played. It is very unusual for a baseball game to end in a tie; typically, extra innings are added until one team manages to score. If the team that scored is an away team, then the home team gets to have one more chance to score. If the home team can't score, the away team wins.
    6. Advertisement

Expert Advice

Work on these areas to improve your reaction time:

  • Improve your awareness on the field. If you want to improve your reaction time, you really need to work on your out-in-the-field baseball acumen. You have to be in the moment and understand the situation so you'll know where you need to be before the pitch is ever thrown.
  • Practice explosive exercises. To improve your reaction time, you need to do explosive fast-twitch exercises, quick first-step drills, sprints, and drop-step drills for outfielders. Also, try short hops, where you have the coach hit you hard ground balls that you have to catch.
  • Understand your opponent. When you're playing against another team, you have to understand the statistical likelihood of what's going to happen based on who it is that you're facing. To do that, you have to study other teams and other players.
From Isaac Hess
Baseball Coach & Instructor

Expert Q&A
Did you know you can get expert answers for this article? Unlock expert answers by supporting wikiHow

  • Question
    Which position should I play if I'm just starting to play baseball?
    Isaac Hess
    Isaac Hess
    Baseball Coach & Instructor
    Isaac Hess is a Baseball Coach, Instructor, and the Founder of MADE Baseball Development and Champion Mindset Training Program, a baseball training program based in Los Angeles, California. Isaac has over 14 years of experience coaching baseball and specializes in private lessons and tournaments. He has played baseball for both professional and collegiate leagues including Washington State University and the University of Arizona. Isaac was ranked as one of Baseball America's top 10 prospects for 2007 and 2008. He earned a BS in Regional Development from the University of Arizona in 2007.
    Isaac Hess
    Isaac Hess
    Baseball Coach & Instructor
    Expert Answer

    Support wikiHow by unlocking this expert answer.

    As a new player, it's best to learn how to play every position. That makes it a lot easier to figure out what you enjoy and what you're good at. It also makes it much easier for the coach to find a way to play you, since they know you can play every position.
  • Question
    What is a division in a baseball game?
    Community Answer
    Community Answer
    There is no such thing as a "division" in a baseball game. (There are "divisions" within certain baseball leagues or conferences.) If you're asking about the units into which a baseball game is divided, they are called "innings." There are nine innings in a standard game (usually less at younger ages or in the game of softball).
  • Question
    How many players play?
    Community Answer
    Community Answer
    Typically nine players on each team play at any one time. A team using a designated hitter will have ten players in the game. Younger teams might use an additional outfielder too, bringing the possible total to eleven.
Advertisement

Warnings

  • Always provide plenty of drinking water so that players can stay hydrated throughout the course of the game. In addition, try to ensure that players have access to nearby toilet or portable toilet facilities, especially if there are no woods nearby the playing field or there are female players on either team.
    ⧼thumbs_response⧽
  • Wear protective gear when you play ball. Batting helmets are particularly advised, and catchers should always wear masks, helmets, and chest, knee, shin and foot guards (the same protection that plate umpires wear).
    ⧼thumbs_response⧽
Advertisement

ReIated wikiHows

You Might Also Like

How to
Throw a Baseball
How to
Swing a Baseball Bat
Calculate a Batting Average
How to
Calculate a Batting Average
Clean Baseball Hats with a Dishwasher
How to
Clean Baseball Hats with a Dishwasher
Oil a Baseball Glove
How to
Oil a Baseball Glove
Break in a New Baseball Glove
How to
Break in a New Baseball Glove
How to
Hit a Baseball
Measure a Baseball GloveHow to Measure a Baseball Glove: Positions, Sizing Charts, & More
Break in a Baseball Cap
How to
Break in a Baseball Cap
Make a Baseball Lineup
How to
Make a Baseball Lineup
Develop Arm Strength for Baseball
How to
Develop Arm Strength for Baseball
Perform a Baseball Slide
How to
Perform a Baseball Slide
Calculate Slugging Percentage
How to
Calculate Slugging Percentage
Throw a Baseball Farther
How to
Throw a Baseball Farther
Advertisement

References

  1. ↑ https://baseballrulesacademy.com/official-rules/mlb/
  2. ↑ http://www.howbaseballworks.com/Fielding.htm
  3. ↑ http://www.baseballpositive.com/defensive-positional-responsibilities
  4. ↑ http://www.ducksters.com/sports/baseballpositions.php
  5. ↑ http://www.espn.com/mlb/story/_/id/10902301/mlb-game-bases-hazard-player-health
  6. ↑ http://www.baseball-almanac.com/rule8.shtml
  7. ↑ http://m.mlb.com/glossary/rules/foul-ball
  8. ↑ http://www.baseball-almanac.com/rule6.shtml
  9. ↑ http://www.helpful-baseball-drills.com/howtoplaybaseball.html
  1. ↑ http://www.howbaseballworks.com/TheBasics.htm
  2. ↑ http://www.fullwindup.com/2011/01/baseball-hitting-for-beginners/
  3. ↑ http://www.howbaseballworks.com/TheBasics.htm
  4. ↑ https://www.coachup.com/nation/articles/stealing-2nd-base
  5. ↑ http://m.mlb.com/glossary/standard-stats/home-run
  6. ↑ http://www.helpful-baseball-drills.com/howtoplaybaseball.html
  7. ↑ http://www.thecompletepitcher.com/different_baseball_pitches.htm
  8. ↑ http://official-rules.org/running/outs_when_running.htm
  9. ↑ http://www.howbaseballworks.com/TheBasics.htm
  10. ↑ http://www.baseball-reference.com/bullpen/Triple_play
  11. ↑ http://www.howbaseballworks.com/TheBasics.htm

About This Article

Isaac Hess
Co-authored by:
Isaac Hess
Baseball Coach & Instructor
This article was co-authored by Isaac Hess. Isaac Hess is a Baseball Coach, Instructor, and the Founder of MADE Baseball Development and Champion Mindset Training Program, a baseball training program based in Los Angeles, California. Isaac has over 14 years of experience coaching baseball and specializes in private lessons and tournaments. He has played baseball for both professional and collegiate leagues including Washington State University and the University of Arizona. Isaac was ranked as one of Baseball America's top 10 prospects for 2007 and 2008. He earned a BS in Regional Development from the University of Arizona in 2007. This article has been viewed 801,690 times.
107 votes - 74%
Co-authors: 155
Updated: March 25, 2023
Views: 801,690
Categories: Featured Articles | Baseball
Article SummaryX

The goal of baseball is to score more runs than the other team. The team that scores the most runs by the end of the game wins! To score a run, first try to hit the ball with a baseball bat when the pitcher throws it to you. If you miss the ball, you get a strike, and once you get 3 strikes you’re out. When you hit the ball, run counterclockwise around the 3 bases and back to the home plate you started at. If you make it back without getting out, you score a run for your team. If you can’t make it all the way back, you can stop at first, second, or third base and wait for the next player on your team to bat. Then, if they hit the ball, you can continue running along the bases toward the home plate. Keep in mind that the other team will be trying to get you out while you’re running the bases. There are 3 ways they can do that. First, if the other team picks up the ball and beats you to your next base with it, you’re out. Second, if a player on the other team is holding the ball and they tag you with it, that means you’re out. Finally, if you hit the ball and the opposing team catches it in the air, you’re out. Once your team has 3 outs, move to the outfield and try to stop the other team from scoring runs by getting them out. After each team has gone up to bat, that’s the end of 1 inning. In the official rules, there are 9 innings in a baseball game. Since there are no ties in baseball, keep playing additional innings if necessary until one team wins. If you want to learn what to do defensively while you're out in the field, keep reading the article!

Did this summary help you?
Advertisement