Whether you're fixing things up around your home or you're building your own furniture, nails can ruin the perfect look of your finished project. You might even need to cover up nails a contractor left exposed. Don't worry, though—there are a number of different ways you can tackle this problem, and we're here to answer some of your most frequently-asked questions!

Question 1 of 10:

How can I hide my nail heads?

  1. Countersink the nails and cover them with wood filler. Place a nail set in the center of the nail head and tap it gently until the nail sinks about 18 in (0.32 cm) below the surface of the wood. Wipe away any sawdust, then use a putty knife to work putty or filler into the hole. Scrape off the excess with the side of the putty knife to create a smooth surface and allow the filler to harden completely. Then, sand the area gently with 180-200 grit sandpaper until the surface is smooth.[1]
    • It's easiest to choose a putty or filler that matches the color of the wood you're filling. However, you can also use a plain filler and stain it after it dries.
    • This is a versatile option that works for all kinds of projects, including flooring, stairs, furniture, baseboards, and trim.
  2. Advertisement
Question 2 of 10:

How do you hide finish nails in trim?

  1. Gouge out a piece of wood, then glue the wood back over the nail. For a seamless way to hide finishing nails, use a wood gouge to scoop out a small chip of wood right where you plan to drive the nail. Try to leave the chip attached to the wood on one side, if you can, then drive the nail into the divot created when you removed the chip. Then, glue the wood chip back into place so it covers the nail. Once the glue dries, lightly sand the area so you'll have a smooth finish.[2]
Question 4 of 10:

Can I paint over nails?

  1. 1
    Use a thick roller to paint over nails you don't want to remove. Don't worry about pulling out the nails you use to hang your pictures or art before you start painting. Instead, just use a roller with a very thick nap—anywhere from 341 14 in (1.9–3.2 cm). The roller will glide smoothly over the nail without leaving any gaps in the paint.
    • This saves time so you don't have to try to find the nail holes again after they've been painted over.[6]
  2. 2
    Prime and paint exposed nails in siding. If you paint right over the nails that were used to attach your siding, they'll likely start to rust over time—and that rust will eventually begin to show through the paint. To prevent that, coat the nail heads with a layer of metal primer, which will seal out moisture and prevent rust.[7]
    • Once the primer is dry, paint the siding how you normally would.
  3. Advertisement
Question 5 of 10:

How do I hide nails in shiplap?

Question 6 of 10:

How do you cover exposed nails on a roof?

  1. Seal the exposed nails with roofing cement. When your roof is installed, the roofers should cover the last row of nails with shingles. However, this doesn't always happen. If you see exposed nails on your roof, coat all around each nail with a thick layer of roofing cement or roofing caulk.[8] Do not use roofing tar, however, as this isn't sufficient to seal out water.[9]
    • It's important to seal the nails because the hole around each nail will allow water to seep into the roof, which can cause damage over time.[10]
  2. Advertisement
Question 7 of 10:

How can I cover my nails in the attic?

  1. 1
    Push corks over the ends of the nails for a quick fix. If you just want to be able to put a box in your attic without bumping your head on a sharp roofing nail, corks make a super-easy solution. Just get a bag of standard corks from a hobby store, then push them firmly onto the nail. It's as simple as that![11]
    • As a bonus, cork naturally repels termites.
  2. 2
    Create a ceiling out of paneling for a longer-term solution. If you'd prefer a more aesthetic solution, attach paneling or wallboard to the rafters in your attic. Cut the pieces of paneling to fit the width of your rafters, then nail them in place with finishing nails. This will create a lightweight ceiling that will hide the ends of the nails.[12]
    • Do not try to nail or screw the boards to the underside of your roof. This will create holes that will allow moisture and air to get into your ridge vents.
  3. Advertisement
Question 8 of 10:

How can I fix my nail pops?

  1. 1
    Hammer in the loose nail, then add additional screws. Over time, the natural expanding and contracting of your home can cause some nails to work their way free. To fix this, hammer the nail back into the stud, then secure the drywall panel by adding 2 drywall screws about 1 in (2.5 cm) above and below the nail.[13]
    • If you simply hammer the nail back into place, it's eventually going to work itself loose again.
    • Make sure the screws will go at least 34 in (1.9 cm) into the stud. If you have 38 in (0.95 cm) drywall, for instance, your screws will need to be at least 1 18 in (2.9 cm) long.
    • When you're finished, use drywall joint compound to smooth out any indentations left by the nails and screws.
  2. 2
    Hire a contractor if you have nail pops in the ceiling. If the nails are popping out of your ceiling, it typically is a sign that the drywall panels were attached directly to the trusses in your ceiling, rather than to clips or blocks. If that's the case, you'll need a contractor to replace the drywall panels. In some cases, this could even be a sign that there's a problem with your foundation, especially if you also have problems like:[14]
    • Doors that stick or don't shut
    • Cracks around your windows, doors, or the corners of your ceiling
    • Obvious cracks in your foundation
  3. Advertisement
Question 9 of 10:

How do you hide nails on a deck?

  1. Use hidden fasteners for a nail-free look in your decking. Decks are traditionally built with a combination of galvanized nails and screws. However, if you want a modern, nail-free look, you can purchase specialized fasteners to hold the boards together. The two no-show types of fasteners are edge-mounts and undermounts.[15]
    • Edge-mount fasteners fit into a slot on the end of the board and are anchored to the side of the board with a screw. You may be able to see them between the boards when you look straight down.
    • Undermount use steel strips that are mounted to the top of the deck joists. They typically can not be seen at all.
Question 10 of 10:

What is the difference between wood putty and wood filler?

  1. 1
    Use wood putty for outdoor or smaller projects. Wood putty is an oil-based product that you apply to wood after you stain or varnish it. It comes in a variety of colors, and it will expand and contract along with your wood. It feels like a soft clay or resin, and you'll need a putty knife to apply it.[16]
    • Because wood putty is durable and isn't as likely as wood filler to shrink over time, it's great for outdoor furniture.
    • Wood putty dries hard, but it takes a lot longer to dry than wood filler.
  2. 2
    Opt for wood filler to fill larger cracks. Wood filler is a putty-like material that you can apply before you stain or finish the wood. The texture makes it a good option if you need to fill a large hole or crack in wood. It dries completely within 24 hours, but it's not adhesive, so you'll have to apply seal over the filler.[17]
    • Wood filler will shrink if it's exposed to sunlight, and it will eventually break as the wood expands and contracts, so don't use it for outdoor projects.
  3. Advertisement

Expert Q&A

  • Question
    How can you hide nail pads?
    Ryaan Tuttle
    Ryaan Tuttle
    Home Improvement Specialist
    Ryaan Tuttle is a Home Improvement Specialist and the CEO of Best Handyman, Inc. in Boston, Massachusetts. With over 17 years of experience, he specializes in building home service businesses, focusing on creating scalable and efficient brands. With the help of his global team, the companies have achieved over 10+ million in sales and received recognition through magazine features, and enjoy partnerships with wikiHow and Jobber field service software. Boston Magazine and LocalBest.com have named Best Handyman Boston the Best Handyman in Boston. Ryaan holds Construction Supervisor and Home Improvement Contractor Licenses.
    Ryaan Tuttle
    Home Improvement Specialist
    Expert Answer
    Put a piece of painter's tape over the trim first. Then, shoot or hit your nail into where the tape is. Paint over the nail pad in the same color, and then peel your piece of tape off. The hole is filled in perfectly, and you don't leave any stains!
Advertisement

About This Article

Ryaan Tuttle
Co-authored by:
Home Improvement Specialist
This article was co-authored by Ryaan Tuttle and by wikiHow staff writer, Amy Bobinger. Ryaan Tuttle is a Home Improvement Specialist and the CEO of Best Handyman, Inc. in Boston, Massachusetts. With over 17 years of experience, he specializes in building home service businesses, focusing on creating scalable and efficient brands. With the help of his global team, the companies have achieved over 10+ million in sales and received recognition through magazine features, and enjoy partnerships with wikiHow and Jobber field service software. Boston Magazine and LocalBest.com have named Best Handyman Boston the Best Handyman in Boston. Ryaan holds Construction Supervisor and Home Improvement Contractor Licenses. This article has been viewed 24,561 times.
8 votes - 87%
Co-authors: 6
Updated: August 25, 2021
Views: 24,561
Categories: Fastening Tools
Advertisement