This article was co-authored by Aaron Bernard. Aaron Bernard is an Aquarium Specialist and the Owner of Limited Edition Corals in Phoenix, Arizona. With over ten years of experience, Aaron specializes in aquarium maintenance, custom design, manufacture, installation, and moving. Aaron holds a BS in Biochemistry from Arizona State University, where he studied the effects of climate change on coral reefs and began to propagate his corals.
wikiHow marks an article as reader-approved once it receives enough positive feedback. In this case, 95% of readers who voted found the article helpful, earning it our reader-approved status.
This article has been viewed 266,936 times.
Fish are very easy pets to keep, and an aquarium is a beautiful addition to a home. However, fish tanks need to be maintained in order to stay healthy and keep looking good. If you’ve placed decorations in your fish tank, you need to clean them as part of regular tank maintenance. Be sure to clean your aquarium’s decorations at least once a month, but more frequently than that if necessary.
Steps
Removing the Decorations from the Tank
-
1Remove decorations one at a time. You may be in a hurry to get your tank looking fresh, but never clean all of your decorations at once. Decorations are home to helpful bacteria that keep your fish healthy. Removing them all at once can upset the balance of your aquarium.[1]
- Removing all of the decorations at once is stressful for your fish.
- Keep your fish in the tank. There’s no need to remove them when cleaning parts of the tank.
- Wash your hands with warm water and soap before you reach into the fish tank. Make sure you’ve rinsed all of the soap off your hands. Soap is terrible for fish and can kill them.
-
2Move live plants to one corner of the tank. If you keep live plants in your tank, you don’t need to remove them. Plants naturally keep themselves clean. Simply move them to one corner of the tank so you can see and clean everything else.[2]
- You can replace the old live plants with new ones if you want to change your aquarium’s look.
- Live plants are an excellent way to help enhance the health of an aquarium, since they work as a natural filter.
-
3Vacuum gravel from the bottom of the tank. Gravel is the most common decoration, and can become covered in algae over time. If you want to spruce it up, use a special gravel vacuum. The gravel vacuum will suck up water and gravel when you stick it into the gravel.[3]
- As the gravel gets sucked into the tube, the pressure will tumble the gravel and clean it.
- The gravel will then fall back out of the vacuum to the bottom of the tank.
- This will remove some dirty water from the tank. You will need to replace it with dechlorinated water when you are done cleaning the decorations.
Cleaning the Individual Decorations
-
1Boil a pot of water. Make sure the pot is large enough to hold one or more decorations at a time. This can be regular tap water. Do not add anything to it, such as soap or chlorine.
-
2Soak the decorations in the water. Once the water has boiled, place one or two decorations into the pot. Let them soak for about 20 minutes. This should kill a majority of the algae and make the decorations easier to clean.
- Your decorations should be able to withstand the temperature of the boiled water. If they melt or fall apart, they should be thrown away.
- Take the water off of the heat before soaking the decorations.
-
3Scrub the decorations with a toothbrush. You can now remove the decorations from the pot and scrub them with the bristles of a toothbrush. The algae should come off relatively easily.
- Use a toothbrush that is specifically dedicated to your aquarium. It should not be used to clean anything else, or you may contaminate your aquarium.
- If your decorations appear clean after this step, you can move on to putting them back in the tank.
-
4Prepare a bucket of bleach solution. This step is not always necessary. However, if you want to make sure you’ve removed all algae, you may want to clean the decorations with a bleach solution as well.[4]
- Your solution should be 5% bleach and 95% water. A handy recipe to use is 4 teaspoons of bleach to 2 gallons (7.6 L) of water.
- This water can be cool or warm, but should not be hot. Hot water can deactivate bleach.
-
5Place the decoration in the bleach solution.[5] Let it sit for about 5 minutes. After this, your decoration should be clean and free from any remaining algae.[6]
- Never bleach aquarium gravel or rocks. This will disrupt the health of your aquarium, because they may absorb the bleach.
- Always use bleach in a well ventilated area. The fumes can be dangerous. If your eyes burn or run due to the fumes, you’re using too much bleach and do not have enough ventilation.
- Wearing rubber gloves is advisable when working with bleach. It may irritate or dry out your skin.
- Never use tap water or chemicals as it will stay inside the ornament and get in the fish's gill which could lead to death.
-
6Scrub the decoration again. Use the same toothbrush that you used earlier. Scrub the decoration to remove any remaining visible algae. Make sure to turn the decorations over and scrub all sides to prevent future algae buildup.[7]
- Rinse the bleach solution off of the toothbrush when you’re done. You can simply run it under the tap for minute to do this.
-
7
Replacing the Decorations
-
1Fill a bucket with dechlorinated tap water. This should be a fresh, clean bucket. Fill it up with enough tap water to cover the decorations. The water should be warm but not hot.[10]
- Most tap water contains some chlorine. Your local pet store should have information about the chlorine content of your city’s tap water.
- You can purchase dechlorinating tablets at your local pet store. Follow the directions on the packaging to make sure you’re using them properly.
-
2Soak the decorations in the dechlorinated tap water.[11] Allow the decorations to soak for about 20 minutes. You want to make sure that all of the chlorine and bleach are removed from the decorations.[12] These chemicals can be deadly for fish.[13]
- Porous decorations such as driftwood will absorb the dechlorinated water, which will then become part of the aquarium’s water. This is part of why it’s very important to make sure the final soak is done in dechlorinated water.
- You can give your decorations a quick rinse under tap water after dechlorinating.
-
3Put the decorations back in the tank. Your decorations are now safe to put back into the tank. You can place them in the tank in new locations if you like. If any of the decorations seem to be disintegrating or falling apart, they should be discarded.[14]
- You can always add new decorations or rotate decorations to give your aquarium a new look.
- Replace the decorations one at a time. You don’t want to stress your fish out by radically changing their environment again.
-
4Move the live plants back into place. If you moved the live plants while you cleaned the decorations, you can now put them back. Make sure your hands are clean when you reach into the tank. Simply move the plants to a new place in the tank.[15]
- You may need to bury the plants’ roots in the gravel to hold them down.
-
5Wash your hands. Always wash your hands after reaching into a fish tank. Use soap and warm water. The water from a fish tank isn’t dangerous, but it does contain bacteria and waste.
Expert Q&A
Did you know you can get expert answers for this article?
Unlock expert answers by supporting wikiHow
-
QuestionCan I use hydrogen peroxide to clean decorations?Aaron BernardAaron Bernard is an Aquarium Specialist and the Owner of Limited Edition Corals in Phoenix, Arizona. With over ten years of experience, Aaron specializes in aquarium maintenance, custom design, manufacture, installation, and moving. Aaron holds a BS in Biochemistry from Arizona State University, where he studied the effects of climate change on coral reefs and began to propagate his corals.
Fish & Aquarium Specialist -
QuestionHow much vinegar should I use to clean the decorations?Community AnswerIf you're going to use vinegar, I would recommend mixing half a cup of vinegar into a few cups of water.
-
QuestionHow do I clean a tank without taking everything out?Yoelvis PedrazaCommunity AnswerScrub the walls and then do a 50% water change.
Warnings
- Killing too much of the beneficial bacteria in a tank can be bad for your fish. Never try to get an aquarium spotlessly clean.⧼thumbs_response⧽
- Using soaps or cleaning products to clean aquarium decorations can contaminate a fish tank. Never use any product unless it states that it is safe for aquariums.⧼thumbs_response⧽
- Clean and replace one or two decorations at a time. Anything more than that can be stressful for your fish.⧼thumbs_response⧽
References
- ↑ http://www.petguide.com/blog/fish/how-to-safely-clean-your-tank-and-aquarium-decorations/
- ↑ http://www.firsttankguide.net/waterchange.php
- ↑ http://www.fishchannel.com/fish-health/healthy-aquariums/dont-destroy-helpful-bacteria.aspx
- ↑ http://www.petguide.com/blog/fish/how-to-safely-clean-your-tank-and-aquarium-decorations/
- ↑ Aaron Bernard. Fish & Aquarium Specialist. Expert Interview. 17 July 2020.
- ↑ http://www.petguide.com/blog/fish/how-to-safely-clean-your-tank-and-aquarium-decorations/
- ↑ http://www.petguide.com/blog/fish/how-to-safely-clean-your-tank-and-aquarium-decorations/
- ↑ Aaron Bernard. Fish & Aquarium Specialist. Expert Interview. 17 July 2020.
- ↑ http://www.petguide.com/blog/fish/how-to-safely-clean-your-tank-and-aquarium-decorations/
- ↑ http://www.petguide.com/blog/fish/how-to-safely-clean-your-tank-and-aquarium-decorations/
- ↑ Aaron Bernard. Fish & Aquarium Specialist. Expert Interview. 17 July 2020.
- ↑ Aaron Bernard. Fish & Aquarium Specialist. Expert Interview. 17 July 2020.
- ↑ http://www.petguide.com/blog/fish/how-to-safely-clean-your-tank-and-aquarium-decorations/
- ↑ http://www.petguide.com/blog/fish/how-to-safely-clean-your-tank-and-aquarium-decorations/
- ↑ https://pethelpful.com/fish-aquariums/Aquarium-Algae-Control-How-to-Get-Rid-of-Algae-in-a-Fish-Tank
- ↑ Aaron Bernard. Fish & Aquarium Specialist. Expert Interview. 17 July 2020.
About This Article
To clean aquarium decorations, remove them one at a time to keep your fish happy and the bacteria at a healthy level. Next, boil a pot of water that’s large enough to hold 1 or more decorations at a time. Once the water comes to a boil, remove it from the heat and immediately place 1 to 2 decorations in the pot. After 20 minutes, scrub them with a toothbrush to remove any algae. If you want a deeper clean, soak the decorations in a 5% bleach and 95% water solution for 5 minutes. After you’ve cleaned the decorations, rinse them in cool water before putting them back in the tank. For more tips from our Veterinary co-author, including now to replace your aquarium decorations, keep reading!