How to Wet Sand a Car

Co-authored by Angel Ricardo

Last Updated: August 30, 2022 References Approved

Wet sanding can be used on new paint to provide an even finish and remove what is commonly referred to as the “orange peel” effect, where the paint appears to have the texture of an orange skin. On existing paint, it can be used to remove scuffs or shallow scratches or restore the luster of the paint. Wet sanding can cause damage to the paint of the vehicle if not done correctly, so take your time as you progress through the process.

Part 1

Part 1 of 3:

Preparing to Wet Sand

1
Determine if wet sanding is right for your car. Wet sanding can be an excellent way to restore your paint to its original luster, but it isn't always the best option. Deep scratches that reach the metal, for instance, often cannot be repaired through wet sanding alone. If the clear coat on the paint has scuffing and scratches, however, wet sanding may be the right solution for you.^{[1]
X
Research source}
- Scratches that are deep enough to expose metal cannot be resolved through wet sanding alone.
- Wet sanding primarily repairs damage to the top layers of paint and clear coat.
2
Assess the type of sanding you need to do. The damage that you are trying to repair will dictate how much sanding will be required, and with what type of paper. Significant clear coat damage will require multiple steps, but light scuffing can be resolved in one stage.^{[2]
X
Research source}
- If the damage to the paint is light, skip the 1200 or 1500 grit sandpaper and begin with 2000 or 3000 grit paper instead.
- If you are wet sanding a newly painted surface, you can also jump directly to the 2000 or 3000 grit paper.
Advertisement
3
Purchase 1200 or 1500 grit sandpaper. When repairing worn, scuffed or scratched paint, begin with a 1200 or 1500 grit sandpaper. You can purchase sandpaper at your local hardware store, large retail store, or auto parts store.^{[3]
X
Research source}
- Any less than 1200 grit sandpaper may produce scratches that are difficult to buff out.
- The higher the grit number on the sandpaper, the finer the abrasive surface.
4
Fill a bucket with water and a small amount of automotive soap. Wet sanding requires a lubricant to prevent the sandpaper from burning the paint. Fill a regular bucket with water and a small amount of automotive soap. Do not use an automotive soap that also serves as a wax or a polish.^{[4]
X
Research source}
- You may also use dish soap for this application.
5
Cut the sheets of sandpaper into halves lengthwise. Remove the sandpaper from its package and hold it like a sheet of paper, so the longer edges are on the right and left. Use a pair of heavy duty scissors to cut the sandpaper sheets lengthwise to double the number of sheets you have.^{[5]
X
Research source}
- The width of the cut sheets will wrap around most sand paper squeegees and handles better.
- The strips need to be long rather than wide in order to dip half of them in water.
6
Soak half of each sheet of sandpaper for five minutes. Place the sandpaper sheets along the edge of the bucket so half of each sheet is soaking in the soapy water. Leave them to soak for five minutes or so.^{[6]
X
Research source}
- The halves that are soaking in the water should be completely saturated with soapy water before moving on.
- The dry portion will allow you to attach the sandpaper securely to your tool of choice.

Part 2

Part 2 of 3:

Wet Sanding the Vehicle

1
Wash and dry the area. Before you begin wet sanding, be sure you remove any debris or film from the area you will be working on. Use a regular automotive soap and a sponge to wash it, then rinse it thoroughly with a hose.^{[7]
X
Research source}
- Do not use an automotive soap that is also a polish or a wax.
- You will not need to wait for the area to dry to move on.
2
Wrap the sandpaper around a sanding squeegee or pad. Do not simply use your hands when wet sanding. The gaps between your fingers will create an uneven sanding surface, resulting in an inconsistent finish. Instead, wrap the sandpaper around a pad, handle or sandpaper squeegee based on your preference.^{[8]
X
Research source}
- Depending on the area you are wet sanding, there are flat, curved, and bendable handles you can choose from.
- Read the instructions on the tool you opt to purchase to see how to secure the paper to it.
- You can buy sanding tools at most hardware and auto parts stores.
3
Sand gently in circular motions. With the sandpaper thoroughly soaked, begin sanding the area with small circular motions and a light amount of pressure. If your sanding does not seem to be affecting the clear coat, apply a little more pressure so it will. Do not press hard enough to create scratches in the paint itself.^{[9]
X
Research source}
- It may take a little practice to determine just how much pressure you need to apply to the sandpaper.
- Ease off of the sandpaper if it appears to be penetrating beyond the clear coat or damaging the paint.
4
Move the sandpaper in multiple directions to ensure an even sanding. Switch the direction of your circular motions from time to time or approach the area from a different angle. This will ensure you sand the entire surface evenly.^{[10]
X
Research source}
- Uneven sanding can be difficult to identify while you work, but may be apparent in the final product.
- Be careful not to increase pressure when changing angles or directions.
- The color in the paint should bleed into the water and tint it slightly. If the water gets any darker, you are sanding too hard.
5
Add water as necessary. Do not allow the sandpaper to become dry while wet sanding. Keep the area heavily saturated with soapy water throughout the process by dipping the sandpaper in the bucket often and even pouring some of the soapy water on the vehicle.^{[11]
X
Research source}
- As the sandpaper gets dry, it will produce heat which can burn the paint.
- If you burn the paint, you may need to have that component of the body repainted.
- Swap sheets of sandpaper out for new soaked ones as they sandpaper becomes worn out or too soggy to use.
6
Be careful of edges on your tools. As you sand, you will likely feel a fair amount of fatigue in your hands and arms. When you get tired, you increase the chances that you will accidentally use the edge of the tool as opposed to keeping it flat on the vehicle. ^{[12]
X
Research source}
- Take frequent breaks to combat fatigue.
- Be careful not to scratch the paint with the handle of the tool or one of the edges the sandpaper is wrapped around.

Part 3

Part 3 of 3:

Treating the Sanded Area

1
Wet sand again with 2000 and 3000 grit sandpaper. Once you have completely wet sanded the area with your 1200 or 1500 grit sandpaper, repeat the process with 2000 or 3000 grit paper. This will remove any shallow scratches or abrasions left by the first stage of wet sanding.^{[13]
X
Research source}
- If the damage you are trying to repair is light, you can do only this step.
- Remember to keep the area completely wet as you sand with this paper.
2
Rinse the sanded area. Once you have completed the wet sanding, use a hose to rinse off any soap or debris left on the vehicle. Be sure you rinse it thoroughly because you will need to apply a glaze or wax to the area once it dries.^{[14]
X
Research source}
- Touch the area with your hand to ensure there is no soapy residue left behind.
3
Allow the area to dry completely. The wet sanded area will need to be completely dry in order to buff properly. Do not allow the area to sit in direct sunlight, as it may damage or fade the paint. Instead, leave it to dry for a few hours in a shady area.^{[15]
X
Research source}
- You can use a towel to dry the area, but allow any remaining moisture to air dry completely before moving forward.
- You may use a hair dryer or other heat source to expedite the drying.
4
Use a buffer and rubbing compound to polish the area. Once the wet sanded area is completely dry, apply some rubbing compound to a buffer pad and use a power buffer to polish the area. Use a medium speed and a light amount of pressure when buffing the rubbing compound into the paint.^{[16]
X
Research source}
- With the buffer running, rotate it in circles as it spins.
- Applying too much pressure can burn the paint, so start light and apply more pressure if need be to rub in the compound.
5
Apply a wax to the finished area. Once the area has been buffed, it should look like the finished product. Use a high quality automotive wax on the area to provide an additional layer or protection. Wet sanding can make that area of the paint slightly more shallow than the rest of the vehicle, so a layer of wax can help prevent it from fading at a different rate than the rest of the paint.^{[17]
X
Research source}
- You may want to wash and wax the entire vehicle to ensure no dust or debris from the wet sanding remains on the vehicle when you're done.
- Waxing the car will protect the paint and create a more brilliant shine.

Expert Q&A
Did you know you can get expert answers for this article? Unlock expert answers by supporting wikiHow

Question

How long do you need to wait for the paint to dry before wet sanding?

Angel Ricardo
Auto Technician
Angel Ricardo is the owner of Ricardo's Mobile Auto Detail headquartered in Venice, California. With over 10 years of experience in mobile detailing, Angel continues to attend auto detailing trainings to improve his customer service and auto detailing skills.

Angel Ricardo

Auto Technician

Expert Answer

Support wikiHow by unlocking this expert answer.

It really varies by the type of paint and clear coat you're using. It just totally depends from paint job to paint job. I'd recommend reaching out to someone who paints cars for a living and asking them based on what products you're using.
Question

How do I wet sand a car using a palm sander?

Uglymug18

Community Answer

You cannot use a palm sander to wet sand. The palm sander will leave swirl marks in the paint and clear coat. You must hand-sand using a block.