Thermostats such as the Lux 500, the Smart Temp 9000, TX1500, Lux HP2110 are functional energy saving tools, but when the thermostat's schedule gets out of sync you could find yourself shivering unnecessarily. Follow these instructions to reprogram it to the schedule you want.

Steps

  1. 1
    Open the thermostat and press "reset" with an open paperclip or other small pointy object.[1]
  2. 2
    Set the correct time and day by turning the dial to the "Day / Time" position. Press "Up" to change the date. Press "Next" to set the time and then use the "Up" and "Down" keys to select the correct time.[2]
    Advertisement
  3. 3
    Move the dial to "Set Weekday Program".
  4. 4
    Decide what temperature you want at various times of the day. The default heating temperatures are 6 AM - 70ºF, 8:30 AM - 60ºF, 3 PM 70ºF, and 11 PM 65ºF.[3]
  5. 5
    Change the start times by pressing "up" and "down".
  6. 6
    Press "Next" to set the desired temperatures using the "up" and "down" keys.
  7. 7
    Continue changing the times and temperatures till you are satisfied with all 4 modes for the weekday schedule.[4]
  8. 8
    Repeat steps 4-7 for the weekend schedule after turning the dial to "Set Weekend Program."
  9. 9
    Turn the dial to Run and close the cover. Switch on the "Heat" or "Cool" as appropriate.
  10. Advertisement

Community Q&A

  • Question
    How do I change the battery? In the display window it says "low battery." What should I do?
    Community Answer
    Community Answer
    Remove the cover carefully, more than likely it snaps on at the bottom and hangs and pivots from two little fingers at the top, pull out on the snaps at the bottom and it should lift off at the top. Now you can see the batteries to tell what type they are. Replace them and mark the date down somewhere, they will need to be replaced in about a year.
  • Question
    How do I reset a lux thermostat?
    Community Answer
    Community Answer
    To unlock the thermostat without the lock code, press the RESET button. After pressing RESET then within the next 4 seconds press the UP button 3 times then the DOWN button once. This will reset the lock code to 0000. Replace thermostat batteries with fresh AA size Duracell® or Energizer® alkaline batteries.
  • Question
    How do I set the heat temperature?
    Community Answer
    Community Answer
    On the side, there should be a green button with an arrow facing upwards and a red arrow facing downwards. The green is to get hot, and the red is to get cold.
Advertisement

About This Article

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 16 people, some anonymous, worked to edit and improve it over time. This article has been viewed 181,984 times.
120 votes - 29%
Co-authors: 16
Updated: September 4, 2019
Views: 181,984
Categories: Heating and Cooling
Advertisement