X
wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 31 people, some anonymous, worked to edit and improve it over time.
This article has been viewed 926,177 times.
Learn more...
On the Sunday before Easter, many Christians celebrate Palm Sunday. Recalling the entrance of Jesus into Jerusalem, churches distribute palm leaves in remembrance of people who waved them and carpeted his path with them. One of the things you can do with these palm leaves is to fold them into crosses. These are great to give out as little gifts or hide as secret presents!
Steps
-
1Gently tear or snap off a palm blade off the palm stalk. The type of palm doesn't matter provided it bends easily; just test its give before snipping and keep testing until you find blades that are adequately flexible.
-
2Hold the palm blade pointy side up.Advertisement
-
3Fold the blade to the right about half-way down to make a 90 degree angle.
-
4Fold down once. Then, fold down again. You should now have a small square shape.
-
5Push the pointy end around the back of the square and fold over.
-
6Take the pointy end on the left, and loop it towards you without making any turns. Then:
- Push then pull the pointy end through the square until it comes out of the square.
- Pull through all the way.
-
7Hold onto the square with one hand and tug on the fat and pointed ends to secure it. You should now have a locked 90 degree angle.
-
8Take the pointy end and turning it towards yourself, push through the square. This is the head and base of the cross.
-
9Turn 90 degrees to where the pointy end is facing downward and the fat end is facing to your right.
-
10Flip it so that the fat end is now on your left.
-
11Take the fat end and loop it away from you into the square. Pull it until it reaches about the same length as the head.
-
12Turn it over to where the straight fat end faces left again.
-
13Take the fat end and loop it towards you back into the square. Pull until it is about the same length as the other two parts. Be sure to tuck it inside the other loop so that you can't see it. You're done!
-
14Finished.
Advertisement
Community Q&A
-
QuestionWhat type of palm frond do I use, and how long should it be?Balla17Community AnswerYou can use any type of frond. It should be at least 6 inches.
-
QuestionShould I wet the palm before starting?Community AnswerNo, you do not need to wet the palm before starting.
-
QuestionDoes the palm have to be fresh off the stalk?Community AnswerNo, but it can't be too dried out or rotten either; if so, you won't be able to make the cross.
Advertisement
Warnings
- Do not throw away the palm parts, even your messed up crosses, as this is considered very disrespectful if they have been blessed. Burial or burning is the proper manner of disposal.⧼thumbs_response⧽
Advertisement
Things You'll Need
- Fresh, pliable palm fronds
About This Article
Advertisement