How to Make a Fake Belly Button Piercing

Belly-button piercings are stylish and sexy , but getting pierced can be painful and expensive, not to mention somewhat permanent. A fake piercing, on the other hand, can give you the chance to try out different styles and decide if a navel piercing is right for you. It's also a great alternative for teens whose parents won't let them get a body piercing.

It's not hard to make a fake piercing that will draw people's eyes to your midriff without giving you away. Pick out a pretty bead, choose a sparkly rhinestone, and attach it to your belly button - no one will know the difference!^{[1]
X
Research source}

Method 1

Method 1 of 3:

Making a Fake Beaded Piercing

1
Find a silver- or gold-colored bead.^{[2]
X
Research source} The bead can be plastic or metal, but it should be small enough to fit inside your belly button. You can buy inexpensive beaded necklaces at discount stores for as little as $1 and cut a single bead off with scissors.
- You can also use wire cutters and snip the post from the back of a bead earring.
2
Find a small stick-on rhinestone. The small jewels have adhesive applied to the back so it will stay on your skin.^{[3]
X
Research source} You can also snip off the post of a jeweled earring stud (as long as it has a flat back) with wire cutters.
- The size of the rhinestone is up to you, but your fake piercing will look more realistic if the jewel is smaller than the bead you chose.
Advertisement
3
Attach the jeweled piece about and inch above your belly button. If you're using a stick-on piece, you don't need to add adhesive. If you made your own piece of jewelry, use spirit gum, nail glue, eyelash glue or body glue so the jewel adheres to your skin.
4
Glue the bead inside your navel. Since the back of the bead won't be visible, you can get a little creative with your adhesive. Try to place the bead in the upper part of your belly button, so that it looks like it's attached to the jewelry above.
5
Let your adhesive dry. Don't jostle or move the pieces for a few minutes while the adhesive dries. It helps to lie down while the glue dries.

Method 2

Method 2 of 3:

Making a Fake Dangling Piercing

1
Find a lightweight dangling earring. A small hoop or a lightweight chain are good options. You can even create your own belly-button jewelry designs using simple materials such as straight pins, beads, wire cutters and pliers.
2
Remove the post from existing jewelry by snipping it with wire cutters. If the earring has a hook, either snip it with wire cutters or use needle-nosed pliers to open that link or loop attached to the hook and pull it apart from the rest of the earring.^{[4]
X
Research source}
3
Create your own beaded jewelry by sliding beads onto a pin. Using a straight pin with a beaded head, slide small beads onto the pin in a custom pattern.^{[5]
X
Research source}
- Slide the beads over the pin in whatever arrangement you like. Remember, the pin head will be the bottom of the jewelry, so the beads should be small enough they don't slide over it. Don't make the pin arrangement longer than what you'd like dangling from your navel.
- Using needle-nosed pliers, bend the remainder of the pin so it forms a 90-degree angle. Clip the sharp end of the pin so that only about 1 centimeter of bare wire remains.
- Bend the remaining wire into a small loop using needle-nosed pliers. The loop will be the top of the belly-button ring.
4
Attach the earring to the top side of your navel. The best adhesives to use are spirit gum, nail glue, eyelash glue or body glue.^{[6]
X
Research source} You will find it helpful to add glue to both the jewelry and your skin, then stick them together.
5
Place a rhinestone sticker above the earring. To give the fake belly-button piercing a more realistic appearance, add a jewel about an inch above your navel. If you don't have a sticker, you can use wire cutters to snip off the post from a rhinestone earring (as long as it has a flat back) and glue the jewel to your skin.
- While the size of the rhinestone is based on your personal preference, choosing a jewel the same size or smaller than the pin head you chose will look most realistic.
6
Allow the adhesive to dry. Be sure you don't move around or touch the pieces for several minutes. It's also helpful to lay down flat while the glue dries.

Method 3

Method 3 of 3:

Customizing Your Belly-Button Jewelry

1
Create custom fake belly-button jewelry just like you would create custom earrings. There are a variety of ways you can customize beads or create your own dangling belly-button jewelry.
2
Customize your bead by painting it with nail polish or covering it in glitter. Cover the bead with nail polish or a thin layer of white craft glue, then roll the bead in glitter. Let it dry completely before you attach it to your body.
3
Create dangling earrings with a variety of materials. Instead of sliding beads onto a straight pin, stick the pin through all sorts of materials.
- You can decorate a tiny Styrofoam craft ball with paint, nail polish or glitter or roll a small ball of aluminum foil and decorate it in the same way. You can even stick the pin through a small fuzzy ball.^{[7]
  X
  Research source}
4
Follow the instructions to make any earring design. Just be sure and stop before adding a post or hook and instead attach the jewelry to your belly button using the instructions above.

Community Q&A

Question

Can I use super glue to make a fake belly piercing?

Community Answer

You can use super glue to make the fake belly piercing object. Do not use super glue to attach it to your skin.
Question

What type of glue should I use and how long will it stay on?

Community Answer

I would use body glue, and it will probably stay on for 6 or 7 hours.
Question

Is a fake piercing durable enough to last through the day at school and then track practice?

Community Answer

Moving that much and sweating will likely cause the piercing to fall out.

Warnings

Don't use super glue because it may stick and pull your skin when you want to remove it. Sensitive skin might also react poorly to the substance.

⧼thumbs_response⧽
Helpful 30 Not Helpful 1
If the glue pulls and hurts when you try to remove the jewelry, apply lotion to it.

⧼thumbs_response⧽
Helpful 33 Not Helpful 3