There isn't a much better way to throw a great get-together or party than to kick things off with an awesome barbeque. Just one problem: Without a hat or apron you may not get the respect you deserve! Worry not, these detailed instructions will show you just how to create your very own custom hat and apron. It might not help your grill skills, but it will definitely help your BBQ image!

Steps

  1. 1
    Cut the pattern pieces: the body of the apron, the top piece of the chef hat, the band for the chef hat, the ties for the apron, and the apron neck strap. Distort sizes based on your own body type, but good basic angles are as follows:
    • Apron: 11 inches (27.9 cm) across the neckline, 21 inches (53.3 cm) across the chest, 23 inches (58.4 cm) across the bottom line, 10 inches (25.4 cm) from the neckline to the chest (vertical, down the center of the apron), 25 inches (63.5 cm) from the chest to the bottom of the apron (vertical, down the center of the apron).
    • Neck strap: 24 inches (61.0 cm) long, 3 inches (7.6 cm) wide.
    • Apron ties (two of them): 56 inches (142.2 cm) long, 2 inches (5.1 cm) wide.
    • Top piece of the hat: 20 inches (50.8 cm) in diameter (across the entire piece).
    • Hat band: equivalent to your head measurement in inches for the length, plus an additional inch for seam allowance. Width is 8.5 inches (21.6 cm).
  2. Advertisement
Method 1
Method 1 of 2:

Apron

  1. 1
    Lay out the cloth you will be using for the apron, iron out any creases, and lay the apron pattern over the cloth.
  2. 2
    Trace around the pattern with tailor's chalk, and cut the pattern out.
  3. 3
    Flip the material over so that the "wrong" side faces up. Fold over a quarter-inch hem (fold twice if you'd like) and sew it down.
  4. 4
    Do the same along all of the inside edges; the top, sides, chest area, and bottom. Make sure to press each hem after you're finished sewing it.
  5. 5
    Take out more fabric for the neck strap and cut out the piece.
  6. 6
    Fold the piece over and press it with the iron.
  7. 7
    Then, unfold it, and fold those sides in half so that they meet in the crease, and press those sides with the iron.
  8. 8
    Fold in the end pieces and press with the iron.
  9. 9
    Clip the corners of the strap at an angle. Fold the strap in on itself and press it with the iron. Sew the strap along all three open ends.
  10. 10
    Attach the strap to the inside of the apron piece. Sew the strap on using a square formation pattern.
  11. 11
    Create the apron ties the same way you created the neck strap, just make them a little longer and not quite as wide.
  12. 12
    Attach them in the same manner that the neck strap was attached, on the corner of the chest area and sides of the apron. The apron is finished!
  13. Advertisement
Method 2
Method 2 of 2:

Chef Hat

  1. 1
    Cut out the top piece of the chef hat from the pattern using the tailor chalk and scissors or another cutting device.
  2. 2
    Stitch all the way around the edge of the pattern using the longest stitch length, locking the stitch at the beginning, but not at the end.
  3. 3
    Cut out the hat band cloth from the pattern using the tailor chalk and scissors or another cutting device. Make sure you measure your own head (or whoever will be wearing the hat) to determine the size of the hat necessary. Adjust the hat band according to size.
  4. 4
    Fold the cloth in half "wrong" sides together and press with the iron.
  5. 5
    Fold and press an inch seam allowance down both sides.
  6. 6
    Fold the band "right" sides together and sew a seam down the side.
  7. 7
    Press the seam open with the iron and fold the band together "right" sides out.
  8. 8
    Grab the circle pattern with the loose stitching and pull the stitch (make sure it's fairly even throughout) until it's about the same size as the band you created.
  9. 9
    Carefully press the bottom edge of the circle against the open end of the band and pin.
  10. 10
    Do this all the way around the open seams and sew the two pieces together. Be sure to catch the other side of the band as you sew. Now you're totally done!
  11. 11
    Finished.
  12. Advertisement

Community Q&A

  • Question
    Where can I download template for this apron?
    T. Chinsen
    T. Chinsen
    Top Answerer
    The pattern has to be made according to the dimensions described. There are images of patterns available if you need a template. Fabric stores also carry patterns for aprons.
Advertisement

Things You'll Need

  • Material for the apron and hat
  • Scissors
  • Tailor's chalk
  • Patterns in your size for the apron and hat
  • Pins
  • Stitching

About This Article

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 10 people, some anonymous, worked to edit and improve it over time. This article has been viewed 87,772 times.
42 votes - 93%
Co-authors: 10
Updated: July 1, 2021
Views: 87,772
Advertisement