How to Inflate a Basketball

Co-authored by Ryan Tremblay

Last Updated: February 12, 2022

Playing basketball with a flat ball decreases your game and stunts training. Playing basketball with too much bounce can also be damaging to the ball. For the best possible basketball, you’ll need to inflate it to the proper tension and care for it. There are alternatives if you do not have a ball pump.

Method 1

Method 1 of 3:

Using a Pump

1
Get an air pump. Purchase a decent air pump for balls if you have not done so already. Pumps aren't too expensive and are easy to find. You can even use a bike pump with the proper needle.
- You’ll need to purchase a ball needle if your pump doesn’t already have one.^{[1]
  X
  Research source}
2
Attach the needle to the ball. Connect your needle to the pump. Moisten the needle with water and insert it into the hole of the ball.
- The hole where you insert the needle is a small black rubber circle with a smaller hole. Check with the manufacturer if you cannot find the hole for your ball.^{[2]
  X
  Research source}
Advertisement
3
Begin pumping. Start pumping your ball. Check the air pressure after 3-5 intervals by feeling your ball. The point is to check how much air you have pumped. Compress the ball with your fingers to check the air pressure.
- Another way to check is to hold the ball at chest-level and drop it. If the ball bounces at least to your waist, then it has the correct amount of air.^{[3]
  X
  Expert Source
  
  Ryan Tremblay
  Basketball Coach
  Expert Interview. 13 November 2020.}
4
Ball your heart out. Once you have a well inflated basketball, you’re ready to take it to the courts. Enjoy your game with a pumped ball. There isn’t a better feeling than a well pumped ball.

Method 2

Method 2 of 3:

Inflating Your Ball without a Pump

1
Use a compressed air can. Yes, you can use your keyboard cleaner to pump your ball. Remove the plastic extender attached to the compressed air. Moisten one end of the tube and insert it into the air hole of the ball. Secure the other end of the tube onto the air canister’s nozzle.
- Hold the handle down until the ball becomes inflated to your desire.
- Repeat the process and add more air if needed.
2
Inflate using CO2. Secure the needle for the ball into the air socket of the basketball. Screw on a tubeless tire valve stem to the needle. Attach a CO2 cartridge to the valve stem. You may need to use a tube to attach the two.
- Loosen the CO2 valve to release the compressed CO2 into the basketball.
- Test the ball and add more air if needed.
3
Use a tire or air supply. As long as you have the needle that fits into the ball, you can use almost anything with the proper adapters. The other supplies you’ll need is a tube and a tire valve. Attach the needle and tubing to your ball first and then attach it to a healthy tire.
- You could also bring your ball and quarters to a tire pump at a gas station. The only other tool you'll need is a needle that fits into ball.

Method 3

Method 3 of 3:

Caring for Your Ball

1
Clean your ball. After a hard day of basketball, be sure you give your ball a proper wipe down. Cleaning it periodically will prevent grime and dirt from settling into the ball. Use a damp cloth and allow it to dry.^{[4]
X
Research source}
2
Store your ball. This depends on how often you like to play basketball. If you play often, keep your ball well inflated and store indoors at room temperature. If you don’t play too often, keep your ball slightly deflated. This will increase the longevity of the ball.
- Never leave a ball outside and avoid direct sunlight for too long of a period.
3
Use it for basketball. A good way to ruin your basketball is by kicking it around like a soccer ball. It is a common misconception that any inflatable ball will work for anything. The construction and design of a basketball is very different from other balls. It was designed for the court, so bring it to the court not to the field.^{[5]
X
Research source}

Expert Q&A
Did you know you can get expert answers for this article? Unlock expert answers by supporting wikiHow

Question

How high should a basketball bounce?

Ryan Tremblay
Basketball Coach
Ryan Tremblay is a Basketball Coach and the Owner of National Sports ID and STACK Basketball. With over 30 years of experience, Ryan specializes in basketball coaching, social media marketing, and website design. Ryan created the National Sports ID as a platform to verify the age/grade of youth athletes and STACK Basketball to inspire young athletes to grow into mature individuals and basketball players. Ryan was a First Team All-Decade basketball player in Bergen County and finished in the top 20 all-time leading scorers in the county’s history with 1,730 points. He went on to Caldwell University on a basketball scholarship where he was part of three championship teams. Ryan was a two-time All-Metropolitan, All-State, and All-Conference point guard and the all-time three-point leader in the school’s history, landing him in the Caldwell University Athletic Hall of Fame.

Ryan Tremblay

Basketball Coach

Expert Answer

Support wikiHow by unlocking this expert answer.

If you drop the ball from your chest, it should come back up to your waist or a little above.
Question

The air valve of the ball fell inside the ball. How can I get it out?

Community Answer

There's no safe way to get the valve out without damaging the ball.
Question

What should I do if I aired up a ball, but it is still squishy?

Community Answer

Check for the proper PSI range requirements of your ball. Perform a bounce test. Hold the ball out in front of you with both hands, just below your chin. Drop the ball and note the height of the first bounce. If the ball bounces to the height of your waist, its perfect. If the ball bounces above or below your waist, pump or deflate accordingly.