How to Set a Timex Ironman

The Timex Ironman is a sports watch that allows you to time and track your athletic performance. It has several features that you have to set for accuracy. Set the date and time so all the clock's readings are accurate. Stay on time by setting the watch's alarm features. Finally, use the Chrono setting to measure and track your laps while you run.

Method 1
Method 1 of 3:

Date and Time Selection

  1. Image titled Set a Timex Ironman Step 1
    1
    Press and hold down the “Set/Recall” button to open the time set menu. This button is located at the top left side of your Timex. Hold the button down for 3-5 seconds to enter the time set menu. After that time, the screen will read “Set” across the top.[1]
    • At any time during this process, pressing “Set/Recall” again closes the time set menu and saves all your changes up until that point. If you’ve made all the changes you wanted to make, then press “Set/Recall” to save them without scrolling through the whole menu.
  2. Image titled Set a Timex Ironman Step 2
    2
    Select the time zone with the “+” or “-” buttons. The Timex allows you to set the time for 2 or 3 different time zones, depending on the model. You’ll automatically be in time zone 1 when you enter the time set menu. If you want to set time zone 2 or 3, press the “+” button to move the time zone forward. Press the “-“ button to move it back.[2]
    • The + button is located on the front of the watch directly below the watch face, and the - button is located on the bottom right side of the watch.
    • On some Timex models, the + button reads “Start/Split” and the – button reads “Stop/Reset.”[3]
    • This feature is useful for checking the time in another part of the world quickly. If you do business or have to make a phone call to different time zones, it’s handy to stay organized.
    Advertisement
  3. Image titled Set a Timex Ironman Step 3
    3
    Set the time with the “Mode” and + or - buttons. The Mode button is in the lower left of the watch. On the digital screen, this area will read “Next.” This button cycles the menu between the hours, minutes, seconds, day, and date, in that order. Press it to make the hours on the watch face flash. Use the + or – buttons to cycle the hours forward or backwards. Then press Mode again to make the minutes flash. Cycle through the minutes with the + or – keys as well, then do the same for the seconds.[4]
    • If you only wanted to set the time and leave the date alone, press Set/Recall after this step to save your progress and close the menu.
  4. Image titled Set a Timex Ironman Step 4
    4
    Choose the current day of the week. After setting the time, press Mode again. The day section above the time will start flashing. Cycle forward with the + button and backwards with the – button. Then press Mode again when you’ve chosen the right day.[5]
  5. Image titled Set a Timex Ironman Step 5
    5
    Set the date with the Mode and + or – buttons. When you press Mode after setting the day, the month (in number form) will start flashing. Select the correct month with the + and – buttons. Then press Mode again and select the current date.[6]
  6. Image titled Set a Timex Ironman Step 6
    6
    Choose if you want the time displayed in 12 or 24-hour mode. When you press Mode after setting the date, the menu changes to 12 or 24-hour time mode. The mode you’re currently in will flash. Use the + button to cycle between both time settings, and press Mode when you pick one.[7]
    • The advantage of 24-hour time is that you don’t have to check if the time is AM or PM. It’s easier to tell what part of the day it is with a quick glance.
  7. Image titled Set a Timex Ironman Step 7
    7
    Save your changes by pressing the Set/Reset button. This button closes the menu and brings you back to the normal watch display. The changes you made will be saved.[8]
    • If the time or date looks wrong, you may have set them incorrectly. Press Set/Reset again to open the time menu back up and check your settings.
    8. Advertisement
Method 2
Method 2 of 3:

Alarm Setup

  1. Image titled Set a Timex Ironman Step 8
    1
    Press Mode until ALARM appears on the watch display. Cycle through the options to get to the alarm menu. If your Timex model allows you to set multiple alarms, select ALM1 by pressing Stop/Reset.[9]
    • To set multiple alarms, keep pressing Mode to find ALM2 and ALM3. Select each one with Stop/Reset.
  2. Image titled Set a Timex Ironman Step 9
    2
    Use Set/Recall and the + and – buttons to set the alarm time. Set/Recall opens the alarm menu. By default, the time will appear and the hours will be flashing. Adjust the hours up and down with the + and – buttons. Press Mode (Next) to make the minutes flash and do the same thing. Press Mode once more to select whether you want the alarm to sound in the AM or PM.[10]
    • If your watch is set to 24-hour time, you don’t have to select AM or PM.
  3. Image titled Set a Timex Ironman Step 10
    3
    Decide if you want the alarm to ring weekdays, weekends, or daily. Press Mode after setting the alarm time. The option above the time will begin flashing. This will say “Daily,” “Wkday,” or “Wkends,” depending on where you last had it set. Press Start/Split to cycle through the options and select how often you want the alarm to sound.[11]
    • If you only want the alarm to ring on one day, disable it after it rings.
  4. Image titled Set a Timex Ironman Step 11
    4
    Press Set/Recall to save the alarm. This programs the alarm into your watch memory. The alarm will sound on the times and days that you set it to.[12]
    • A small clock icon appears on the left of your watch display to let you know that an alarm is active.
  5. Image titled Set a Timex Ironman Step 12
    5
    Open the alarm menu and press Start/Split to turn the alarm off. Get to the alarm menu by cycling through the Mode button until you reach ALARM. Then press Start/Split to toggle the alarm off.[13]
    • To reactivate the alarm, do the same actions and hit Start/Split to toggle the alarm back on.
    6. Advertisement
Method 3
Method 3 of 3:

Pace and Splits Tracking

  1. Image titled Set a Timex Ironman Step 13
    1
    Press Mode until “Chrono” appears on top of the screen. Chrono is the mode you use to track your split and lap times. It’s the second option after the main clock.[14]
    • If you scroll too far and miss Chrono mode, keep pressing Mode to cycle through the watch options. The watch modes are Clock, Chrono, Timer, and Alarm. Cycle back to Chrono if you miss it the first time.
  2. Image titled Set a Timex Ironman Step 14
    2
    Set the Lap and Split setting by pressing Set/Recall. You have 2 options for the Chrono setting. One displays the current lap time larger with the overall split time smaller. The other reverses the order, and shows the split time larger. Cycle between them with the Start/Split button. Then press Set/Recall again when you pick a format.[15]
    • If you’re trying to improve your lap time, set the Lap to appear larger. This way, you can see how your laps are measuring up.
    • If you’re just timing your run without tracking laps, then displaying Split larger is more useful.
    • The watch keeps the format that you picked for every time you use the Chrono unless you change it again.
  3. Image titled Set a Timex Ironman Step 15
    3
    Start the Chrono with the Start/Split button. This begins the timer. Start your workout and use the Chrono to check your current time. If you’re only measuring your overall run or exercise time, then just let the timer go. If you want a specific lap or split time, the Chrono can also measure this.[16]
  4. Image titled Set a Timex Ironman Step 16
    4
    Get your current lap time by pressing the Start/Split button. If you’re tracking your lap progress, press the Start/Split button when you complete a lap. The timer display will show your lap time for 10 seconds so you can read it. The timer continues running in the background and switches back after 10 seconds.[17]
    • You can use this feature for any measurement. Whether you’re tracking your time per lap, mile, kilometer, or another distance, the Chrono will measure it when you hit Start/Split.
    • Repeat this for as many laps as you’re running to get the time for each lap.
  5. Image titled Set a Timex Ironman Step 17
    5
    Pause the timer with the Stop/Reset button. If you need a break or want to talk to someone, pause the timer by pressing Stop/Reset. Then when you’re ready to start again, press Start/Split to resume the timer where it paused.[18]
    • Be careful not to accidentally hit Stop/Reset again to start the timer. This will erase your current workout and you’ll have to start over.
  6. Image titled Set a Timex Ironman Step 18
    6
    Store the workout by pressing Set/Recall when you’re done. When you’re done, stop the timer by pressing Stop/Reset and then holding the same button to reset the data. If you want to store and review your workout results, hold Set/Recall to save the data.[19]
  7. Image titled Set a Timex Ironman Step 19
    7
    Review your workout by pressing Set/Recall. This brings you to the workout data menu. All the results you’ve stored are on this menu by date. To review your workouts, use + and – to scroll to the one you want to view. Then press Next (or Mode) to open a specific workout.[20]
    • When on a specific workout, you can view each lap of your run plus the total time.
    • To clear a workout, hold Stop/Reset for 5 seconds. When the watch beeps, the last stored workout is deleted.
    • Continue holding the button to erase all workouts and free up all the watch memory.
    8. Advertisement

Community Q&A

  • Question
    How do you count laps on a Timex Ironman?
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    You can count laps by putting your watch in CHRONO mode. Hit the Mode button until CHRONO appears on the display, then press START/SPLIT to begin CHRONO. Hit START/SPLIT again to create a split between laps. STOP/RESET will stop Chrono mode, and SET will store your workout. Your watch can count up to 99 laps and will store 50.
  • Question
    How do I set the day on my Timex watch?
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    Go into TIME mode and press and hold SET. Hit NEXT to cycle through the different elements of the TIME mode until you get to the day of the week or month, then use the +/- buttons to go up or down to the correct day. Press DONE when you’re finished.
  • Question
    Can you swim with a Timex Ironman?
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    Yes, the Ironman is water resistant, so it’s okay to use it while pool swimming. Avoid pushing the buttons while you’re in the water, since this could let water into the watch. Don’t use it while diving.
Advertisement

You Might Also Like

Set an Armitron WatchHow to Set the Time & Date on Your Armitron Watch
How to Set the Time and Date on a Digital Watch
How to
Adjust a Watch Band
Set the Time on a Baby G Watch
How to
Set the Time on a Baby G Watch
Pry off a Watch Backing Without Proper Tools
How to
Pry off a Watch Backing Without Proper Tools
Remove Scratches from Watch Glass
How to
Remove Scratches from Watch Glass
Change a Watch Battery
How to
Change a Watch Battery
Wear a Watch
How to
Wear a Watch
Remove Watch Band LinksHow to Adjust a Watch Band
Use an Analog Watch as a Compass
How to
Use an Analog Watch as a Compass
Tell if a Rolex Watch is Real or FakeHow to Tell if a Rolex is Real or Fake: 11 Signs of Authenticity
Spot a Fake Breitling
How to
Spot a Fake Breitling
Wind an Automatic Watch
How to
Wind an Automatic Watch
Open a Screw Back Watch
How to
Open a Screw Back Watch
Advertisement

References

  1. ↑ http://assets.timex.com/user_guides/W254_M511/W254_M511_NA_EN.pdf
  2. ↑ http://assets.timex.com/manual/W-191.pdf
  3. ↑ https://youtu.be/mozIqaItjtM?t=20
  4. ↑ https://youtu.be/mozIqaItjtM?t=28
  5. ↑ http://assets.timex.com/manual/W-191.pdf
  6. ↑ http://assets.timex.com/manual/W-191.pdf
  7. ↑ https://youtu.be/mozIqaItjtM?t=38
  8. ↑ http://assets.timex.com/user_guides/W254_M511/W254_M511_NA_EN.pdf
  9. ↑ http://assets.timex.com/manual/W-191.pdf
  1. ↑ http://assets.timex.com/manual/W-191.pdf
  2. ↑ https://youtu.be/vmUOgw5KUIU?t=505
  3. ↑ https://youtu.be/vmUOgw5KUIU?t=521
  4. ↑ http://assets.timex.com/manual/W-191.pdf
  5. ↑ http://assets.timex.com/manual/W-191.pdf
  6. ↑ https://youtu.be/vmUOgw5KUIU?t=218
  7. ↑ http://assets.timex.com/manual/W-191.pdf
  8. ↑ https://youtu.be/vmUOgw5KUIU?t=253
  9. ↑ https://youtu.be/vmUOgw5KUIU?t=279
  10. ↑ http://assets.timex.com/manual/W-191.pdf
  11. ↑ http://assets.timex.com/manual/W-191.pdf

About This Article

wikiHow Staff
Co-authored by:
wikiHow Staff
wikiHow Staff Writer
This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow's Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards. This article has been viewed 186,217 times.
52 votes - 55%
Co-authors: 9
Updated: July 28, 2022
Views: 186,217
Categories: Watches
Article SummaryX

To set your Timex Ironman, you’ll first need to select the correct date and time. Push down on the “Set/recall” button until the Set menu appears. Then, use the plus, minus, and “Mode” buttons to select the correct date and time. When you’re done, press the “Set/recall” button to save your changes. Once you’ve set the time, you can also set alarms. Just press the “Mode” button until the alarm menu appears on the display. Select it by pressing the “Set/recall” button, then select the time for your alarm using the plus and minus buttons. After you set the alarm, you can also choose how often it should ring, such as daily, on week days, or at weekends. For tips on how to measure your running times with your Timex Ironman, keep reading!

Did this summary help you?
Advertisement