How to Prune Plumeria

Co-authored by Monique Capanelli and Amy Bobinger

Last Updated: May 7, 2021 References Approved

Plumeria, also called frangipani, is a small tree known for its beautiful, fragrant flowers. Plumeria trees are easy to care for, making them a popular option for houseplants, but they can start to grow leggy if they’re not pruned. Luckily, pruning a plumeria is easy, and you can use the cuttings to propagate new plants!

Method 1

Method 1 of 2:

Pruning Your Plumeria

1
Prune your plumeria in the early spring. Pruning encourages the plant to grow, so the best time to trim the plant is at the very start of the growing season, which occurs during spring and summer. This way, the new growth will make your plant look full and healthy.^{[1]
X
Research source}
- If you like, you can prune your plant after it finishes blooming, instead, but since the pruning will cause the plant to grow, it's best to do at the start of the growing season.
- Plumeria typically blooms from April through November in the northern hemisphere, and February through April in the southern hemisphere.^{[2]
  X
  Research source}
2
Remove dead or diseased branches whenever you see them. You don't have to wait for a certain season to prune off unsightly branches. Trim them off of the plant as close to the base as you can get, using the same technique as you would for pruning.^{[3]
X
Research source}

Advertisement
3
Use a sharp, sanitized tool to make the cuts. When you’re pruning plumeria, you can use a knife, pruning shears, or a small saw. Older plumeria especially can get very woody, so a sharp tool is necessary to get a clean cut.^{[4]
X
Research source}
- Wear gardening gloves to protect your hands and improve your grip.
- For most plumeria plants, pruning shears are ideal. However, a pruning saw is a good option if you'll be cutting thicker plumeria branches, while a sharp knife would be ideal if you're pruning a younger, smaller plumeria plant.
- You can prevent the spread of harmful bacteria into the cuts by wiping the blade with rubbing alcohol before you start cutting as well as in between cuts.^{[5]
  X
  Research source}
4
Prune off any unsightly or overgrown branches. Plumeria is extremely tolerant to cutting, and it can be cut all the way back to a 12 in (30 cm) stem without harming the plant. Feel free to cut off any limbs or branches that are in your way or that you don’t think look very good.^{[6]
X
Research source}
- The only way you can over-prune your plant is to cut it all the way to the ground.
5
Make your cut about 1 in (2.5 cm) from the base of the limb. When you’re getting ready to cut, locate the small knot at the base of a branch. This is the branch collar and is a part of the tree, and you should not cut it.^{[7]
X
Research source}
- Don't cut a limb in the middle of the branch; this is called topping and will not encourage new growth.
6
Make your cuts at a 45° angle to the branch. Angling your cuts will help prevent standing water, which can promote the growth of fungus on the plumeria. The fungus leads to tip rot, which can eventually kill your plant.^{[8]
X
Research source}
- In addition to protecting the original plumeria plant, cutting the limbs at an angle will give them more surface area to grow roots if you're planning on propagating them.
- If you do notice water collecting on the tips, treat them with a fungicide.^{[9]
  X
  Research source}

Method 2

Method 2 of 2:

Rooting Plumeria Cuttings

1
Choose cuttings that are 12–18 in (30–46 cm) in length. Shorter cuttings sometimes have trouble taking root, and longer cuttings can be difficult to stabilize. At 12–18 in (30–46 cm), your plant will be most likely to stay upright in the pot long enough to take root.^{[10]
X
Research source}
- If your limb tip has 2 or more growing points, you'll likely get a more compact plant that's more suited for a container, but you can also grow a new plumeria from a branch with one growing point. This will likely result in a taller plant that's more suited for outdoor growth.
2
Remove the biggest leaves from the cutting. Leaves draw moisture from your plant, so removing the largest ones from the bottom of the limb will help your cutting retain more water. Pinch the leaf near the base and twist until it separates from the limb.^{[11]
X
Research source}
- You don’t have to remove the leaves at the very tip of the cutting.
3
Let the cutting dry for about a week. Before you attempt to root the cutting, place the stick in a dark, dry place. During this time, the cut will begin to seal, making your cutting less prone to rot when you plant it.^{[12]
X
Research source}
- If you're in a hurry, place the cut end of the limb directly into dry sand and leave it there for 3 days.
4
Mark the cutting about 4 in (10 cm) from the bottom. Measure 4 in (10 cm) from the cut edge of your limb with a ruler, then use a sharp knife to gently score the bark. This will help you know how deep to plant your cutting.^{[13]
X
Research source}
- If you don’t want to cut into your limb, mark the spot with a permanent marker.
5
Dip the new cutting into water, then rooting hormone. A rooting hormone is a chemical which encourages a plant to start growing roots, and you can find it at most garden stores. Dipping the cutting in the water first will help the hormone adhere to the limb.^{[14]
X
Research source}
- Don’t use treated water. For best results, use filtered or bottled water, rather than tap water.
6
Fill a large planter with 2 parts perlite and 1 part peat or potting soil. This mixture will allow for ideal drainage for your plumeria tree, which is especially important while the plant is rooting. Leave about 1 inch (2.5 cm) from the top of the pot rim, where you’ll add a layer of pea gravel after you plant your cutting.^{[15]
X
Research source}
- Make sure the pot you're using has holes in the bottom for water drainage.
- The larger the pot you choose, the larger your plumeria can grow. A planter that's at least 5 US gal (19 L) should give the plant ample room to develop for the first few years. If the plant is healthy, you will probably need to move it into a 15 US gal (57 L) in a few years.
7
Plant the cutting about 4 in (10 cm) into the soil. Using the mark you made earlier as a guideline, push the stick down into the perlite and peat mixture. Try to do this in one smooth motion so you don’t wipe away the rooting hormone.^{[16]
X
Research source}
8
Fill the pot the rest of the way with pea gravel. Spread the gravel out so it’s an even layer, then press it down firmly into the soil. This will help stabilize your cutting, and it will also prevent standing water on the surface of your soil.^{[17]
X
Research source}
- You can purchase pea gravel wherever you buy your other gardening supplies.
9
Pour water into the pot until it drains through the holes. Plumeria doesn’t like over-watering, but you should start off by soaking the soil thoroughly. Once the soil is saturated, you won’t need to water the plant again until the soil dries out completely.^{[18]
X
Research source}
- Over-watering is one of the primary causes of an unhealthy plumeria plant, as it can lead to root rot. You shouldn’t need to water your plant more than once a week, except during the hottest parts of the year.
10
Place the pot where it will get 6-8 hours of sunlight a day. Plumeria is a tropical plant that likes a lot of sunlight and warmth. Find a sunny spot on a deck or near a window, and your plumeria should thrive.^{[19]
X
Research source}
- It should take a few weeks for your plumeria to establish roots. Do not pull on it to test the root development; instead, watch for the plant to show signs of leaf growth.^{[20]
  X
  Research source}
- Once you have an established plumeria plant, you will need to re-acclimate it to the sunlight after a dormant winter in the shade; otherwise, the plant can get sunburned. Put the plant in an area with partial sun, then gradually move it into the full sun as it grows more tolerant.

Expert Q&A
Did you know you can get expert answers for this article? Unlock expert answers by supporting wikiHow

Question

Can Plumeria tolerate freezing temperatures?

Monique Capanelli
Plant Specialist
Monique Capanelli is a Plant Specialist and the Owner and Designer for Articulture Designs, an innovative design firm and boutique in Austin, Texas. With over 15 years of experience, Monique specializes in interior botanical design, living walls, event decor, and sustainable landscape design. She attended the University of Texas at Austin. Monique is a Certified Permaculture Designer. She provides plant and botanical design experiences, from small gifts to entire transformations, to shoppers as well as commercial clients including Whole Foods Market and The Four Seasons.

Monique Capanelli

Plant Specialist

Expert Answer

Support wikiHow by unlocking this expert answer.

Plumerias are tropical plants, so they won't survive temperatures below 35°F. If you live in a region that gets cold temperatures, you can keep your plumeria in a pot and move it inside when the temperatures dip. Or, you can pull up your plumeria and let it go dormant over the winter with the roots bare.
Question

What fertilizer should I use on frangipani?

Maggie Moran
Home & Garden Specialist
Maggie Moran is a Professional Gardener in Pennsylvania.

Maggie Moran

Home & Garden Specialist

Expert Answer

Support wikiHow by unlocking this expert answer.

It is best to use an organic fertilizer that is high in nitrogen, potassium, and phosphorous.
Question

How do you care for a plumeria stick?

Maggie Moran
Home & Garden Specialist
Maggie Moran is a Professional Gardener in Pennsylvania.

Maggie Moran

Home & Garden Specialist

Expert Answer

Support wikiHow by unlocking this expert answer.

You first start off by dipping the ends into a rooting hormone and then pushing them halfway down into a pot full of potting mixture. The stick may need to be braced up with a stake for support. Once planted, water it immediately, and then let it dry out for a few weeks to prevent over-watering and the forming of rot.