How to Propagate Roses

Last Updated: August 23, 2021 References Approved

Roses are flowering perennial plants prized for their beautiful flowers, which are made up of delicate and layered petals. One of the best ways to propagate new roses is to take a cutting from an existing plant and grow it into a whole new rose bush. When you grow roses from a cutting, you cut a stem from a healthy plant and root it in a growing medium so it grows into an independent plant of its own. However, you can also propagate roses by dividing an existing plant, but this requires a little more effort than with cuttings. To propagate by division, you have to dig up an entire rose bush, cut the root system in half, and replant the two halves as separate bushes.

Method 1

Method 1 of 3:

Growing Roses from Cuttings

1
Select the right time. Planting stem cuttings is one of the most popular ways to propagate roses. The best time to take and plant cuttings is when the temperature outside is warm but not too hot. Choose a time when the rose bush is undergoing strong growth. The ideal time of year for this is late spring or early summer.
- It is possible to grow roses from cuttings when the weather is colder, but the process will take longer and your chances of success will be lower.^{[1]
  X
  Research source}
- If you don’t have a rose bush of your own that you can use for a cutting, ask a friend or neighbour if they have a plant you can use.
- You may also be able to find wild rose bushes that you can propagate.
- You can also ask a local nursery or garden center if they let people take cuttings from any of their plants.
2
Gather your tools. To propagate roses using this method, you need to select a healthy rose plant and cut off a stem. For this project, you will need some gardening, cutting, and potting tools, including:
- Clean two-inch (five-cm) pot
- Potting soil
- Sharp sterilized cutting tool
- Rooting hormone
- Clear plastic bag or mason jar
Advertisement
3
Prepare a pot. Fill the small pot with potting soil. For the best results, replace a quarter of the soil with perlite, peat moss, or vermiculite, or a combination thereof. This will increase air flow and draining, giving your cutting a better opportunity to root.^{[2]
X
Research source} If the soil is dry, water it and allow the excess water to drain out, so that the soil is evenly moist.
- Instead of a pot, you can also use a small mason jar or the bottom half of a large plastic bottle (cut the top off).
4
Select a stem for the cutting. Choose a healthy and established plant to take a cutting from. The stem should come from the top and side of the plant, and it should have at least three leaves on it. Ideally, find a stem that has flowered recently. Look for a stem that’s young but established and hardy, and that’s about six inches (15 cm) long.
- It’s better to take cuttings from the top and side of the plant because they seem to root better than cuttings from the middle or bottom.^{[3]
  X
  Research source}
- It’s ok if the stem you select has buds and flowers currently on it, but look for a stem with flowers that are starting to wither. This indicates the stem recently bloomed.
5
Cut off a section of stem. The best tool for taking the cutting is a pair of sharp pruning shears or a razor blade. Cut the stem from the plant at a 45-degree angle, just below one of the lower leaf nodes (where the leaf attaches to the stem).^{[4]
X
Expert Source

Monique Capanelli
Plant Specialist
Expert Interview. 22 September 2020.}
- Make sure the cutting tool has been sterilized to prevent the spread of disease.
- To sterilize your cutting tool, you can heat it with fire until it’s red hot, or boil it in water for 30 minutes.
6
Remove flowers, buds, and some leaves. With the same cutting tool, cut off any withered flowers and new buds where they attach to the stem. If any hips (fruit) have started to form, cut these off as well.^{[5]
X
Research source}
- Cut off any leaves on the lower half of the stem.
- Leave two to three higher leaves to help with photosynthesis. Cut these leaves in half to reduce the loss of moisture.
7
Wound the cutting. Wounding is the process of making slits in the bottom of the stem, and this will encourage rooting. With the same cutting tool, cut one-inch (2.5-cm) slits in the bark at the bottom of the stem.
- Make three or four slits in the bark to give the roots more places to grow out from.^{[6]
  X
  Research source}
8
Dip the cutting in rooting hormone.^{[7]
X
Expert Source

Monique Capanelli
Plant Specialist
Expert Interview. 22 September 2020.} Insert the bottom two inches (five cm) of the cutting so that the cutting, wounds, and bottom of the stem are covered in the hormone. Shake it gently to remove excess hormone.^{[8]
X
Research source}
- Rooting hormone is not a necessary step in the cutting and propagating process, but it will increase the chances that your cutting will grow successfully.
9
Plant and water the cutting. With the tip of your finger or a pencil, make a two-inch (five-cm) hole in the potting soil at the center of the pot. Place the cut end of the stem in the hole. Pack the soil around the stem and use your hands to firm the soil in place.
- Water the soil so that it’s thoroughly moist.^{[9]
  X
  Research source}
10
Cover the stem with plastic or a mason jar. To cover the stem with plastic, insert two eight-inch (20-cm) sticks or wires into the soil on either side of the stem to prop up the plastic. Cover the pot and stem with a clear plastic bag, and affix the bag to the pot with an elastic or twine. With a mason jar, simply place a large mason jar over the stem.
- Covering the stem with glass or plastic will create a miniature greenhouse, and the cover will help keep in the heat, moisture, and ultraviolet rays the stem needs to root and grow.^{[10]
  X
  Research source}
11
Provide the cutting with plenty of sunlight and moisture as it grows. Throughout each day, the plant will need plenty of bright sunlight. But to avoid overheating, place the plant in a bright location that receives lots of indirect sunlight, especially around midday.^{[11]
X
Research source}
- The mason jar or plastic will help to keep the soil and cutting moist, but add more water any time the cutting or soil starts to dry out.
- Placing a heating mat under the plant can help encourage the roots to grow.

Method 2

Method 2 of 3:

Dividing Rose Plants

1
Pick the right time. The ideal time to divide perennial plants is in early spring or late fall. These are times when the plants are in dormant stages, and this will minimize shock to the plant and improve root growth.^{[12]
X
Research source}
- It’s also important to divide perennials during periods of dormancy because this will ensure they're not blooming. Avoid dividing rose bushes when they're in bloom.
- Dividing roses is less popular than propagating by cuttings because it’s more difficult and time consuming. Dividing requires you to uproot an established plant, cut it in half, and replant the two halves.
2
Gather your supplies. To propagate roses by division, you'll need a healthy and established rose plant, as well as some garden tools and equipment, such as:
- Sharp and sterilized knife or razor
- Shovel or spade
- Gardening gloves
- Two large buckets
- Damp newspaper
- A prepared garden plot
- Fertile soil
3
Select a healthy plant to divide. To make sure that your divided rose bushes will thrive and produce healthy flowers, choose a healthy and established plant to divide. A healthy plant will:^{[13]
X
Research source}
- Have plenty of leaves
- Have leaves that are distributed evenly around the plant
- Produce lots of flowers
4
Water the rose bush. To minimize shock to the plant before you uproot and divide it, water the bush thoroughly. This will also help to loosen the soil around the roots, making it easier to remove the plant from the ground without damaging the roots.
5
Dig up the rose bush carefully. With the shovel, start digging into the ground a few feet away from the bush's stem. You need to dig up the plant, but must avoid digging into and damaging the roots. Once you’ve cleared the area around the plant, use your hands to brush away soil and expose the roots.
- When the roots are exposed and the area around the plant has been dug up, carefully pull the plant up from the ground.
6
Cut the plant into equal halves. Lay the rose bush on the ground or place it into a wheelbarrow. With a sterilized pruning saw or knife, divide the plant into two equal halves by cutting the roots down the middle of the plant.
- To sterilize your cutting tool, heat the metal with fire until it’s red hot, or boil it for 30 minutes in water.
7
Keep the roots moist. Once the plant has been divided, place each half into a bucket and transfer the buckets to a shady place to protect them while you prepare the garden plot. To keep the plants moist, cover them with damp newspaper.
- Ideally, you want to keep the humidity around 50 percent to keep the plants moist without soaking them too much.^{[14]
  X
  Research source}
8
Prepare the plots. In the area where you removed the original rose bush, replace the soil you dug up with fertile soil or organic matter to make sure there are plenty of nutrients in the garden bed for the new plants. Use your hands or a spade to mix in the new soil and spread it around the garden bed.
- Good organic matter to add to the soil include aged compost or manure.
9
Replant the two halves. Dig two holes in the garden bed you’ve prepared to the same depth as the original plant. Make the holes about 24 inches (60 cm) apart. Plant the individual rose bushes in the holes and cover the roots with soil. Pack the soil around the roots with your hands.
- Water the plants thoroughly.
- Keep the rose bushes moist during the first year that they're establishing themselves.^{[15]
  X
  Research source}

Method 3

Method 3 of 3:

Keeping Your Roses Healthy

1
Make sure they get lots of light. Roses need between six and eight hours of sunlight each day. When choosing a location for your roses, pick somewhere that receives lots of direct sunlight.
- In very warm climates, pick a location that gets indirect sunlight when the sun is at its hottest, between 10 a.m. and 4 p.m. This could include near a tree that provides some shade during the hottest time of day.
- In cooler climates, plant the roses in front of a south-facing or west-facing wall or fence to give the roses some extra protection and reflected heat.^{[16]
  X
  Research source}
2
Water the roses often. Roses need to be watered deeply, especially during their first year and during the warmer summer months. Provide deep soakings twice a week in summer to keep the soil consistently moist.
- The best way to water roses is with a drip irrigation system or soaker hose that concentrates water at the base and roots of the plant. If the flowers or foliage get wet, it could cause disease, fungus, and rot problems.^{[17]
  X
  Research source}
3
Amend the soil with fertilizer. Along with plenty of water and sunlight, roses also require regular feeding, especially before and during blooming periods. In the spring and summer, between the months of April and July, provide the roses with a monthly application of nutrients, such as:
- Granular 5-10-5 or 5-10-10 fertilizer^{[18]
  X
  Research source}
- Fish emulsions
- Seaweed extract
- Aged manure or compost
- Alfalfa meal
4
Prune often. Roses will thrive when they are pruned regularly, as pruning removes diseased stems, flowers, and leaves, and increases circulation throughout the plant. In the spring, use shears or loppers to remove dead flowers, diseased stems, and old leaves.^{[19]
X
Research source}
- Throughout the spring and summer, continue removing dead flowers and leaves as necessary.

Expert Q&A
Did you know you can get expert answers for this article? Unlock expert answers by supporting wikiHow

Question

What do I do with a rose cutting?

Monique Capanelli
Plant Specialist
Monique Capanelli is a Plant Specialist and the Owner and Designer for Articulture Designs, an innovative design firm and boutique in Austin, Texas. With over 15 years of experience, Monique specializes in interior botanical design, living walls, event decor, and sustainable landscape design. She attended the University of Texas at Austin. Monique is a Certified Permaculture Designer. She provides plant and botanical design experiences, from small gifts to entire transformations, to shoppers as well as commercial clients including Whole Foods Market and The Four Seasons.

Monique Capanelli

Plant Specialist

Expert Answer

Support wikiHow by unlocking this expert answer.

Dip the end of the cutting in rooting hormone to help encourage root growth, then plant it in a pot with some good soil.
Question

How do you grow roses from seed?

Katie Gohmann
Professional Gardener
Katherine Gohmann is a Professional Gardener in Texas. She has been a home gardener and professional gardener since 2008.

Katie Gohmann

Professional Gardener

Expert Answer

Support wikiHow by unlocking this expert answer.

Rose seeds need to go through stratification (an artificial cold spell) for 10 to 12 weeks before they will sprout. This, combined with a germination success rate of 20-30% makes propagation by seed an unattractive prospect. on by seed an unattractive prospect. If you still want to try it, find a good source of information that will guide you through the process.
Question

How can I keep miniature roses alive?

Community Answer

I planted mine in to the ground just like a normal rose bush, amending the soil with rose fertilizer and alfalfa meal. It is gorgeous, but because it's low to the ground, you should make sure to use drip irrigation or a soaker hose to water it so it doesn’t get black spots from the water splashing on the leaves. If yours is in a pot, let it go dormant in the garage or close to your home to keep the pot from freezing. Keep it watered and in the spring it should come back with more fertilizer to keep it happy.