How to Make Feta Cheese

Co-authored by wikiHow Staff

Feta cheese is delicious crumbled over traditional Mediterranean salads or in Mediterranean-style sandwiches like gyros and donairs. It might seem like a daunting task to make cheese yourself, but it is actually a relatively simple process to make feta at home. With a few ingredients and sterile equipment, you will be making feta all by yourself in no time!

Ingredients

1 gallon (3.8 L) of fresh goat’s milk, cow’s milk, or sheep’s milk
1 tbsp (15 ml) of fresh plain yogurt
1/2 tablet of rennet
1/4 cup (60 ml) of non-chlorinated water
Table salt

Part 1

Part 1 of 3:

Starting the Cheese Curds

1
Warm 1 gallon (3.8 L) of fresh goat’s milk to 86°F (30°C) in a stainless steel pot. Stir it regularly so that it does not burn on the bottom. Check the temperature with a kitchen thermometer and remove it from the heat when you reach the target temperature.^{[1]
X
Research source}
- Feta is traditionally made with goat’s milk but you can use cow’s or sheep’s milk as well.
- Try to not let the temperature go more than 1-2 degrees above the target temperature.
- It’s important to use a stainless steel pot because it is a non-reactive metal, which means that it will not interact with the milk.
2
Mix 1 tbsp (15 ml) of plain yogurt with an equal amount of goat’s milk. Stir the blended yogurt and milk into the warmed milk and mix it thoroughly with a kitchen spoon or ladle. Cover the pot and allow the inoculated milk to sit for 1 hour at room temperature.^{[2]
X
Research source}
- The live yogurt cultures will help the milk to curdle.
Advertisement
3
Dissolve 1/2 tablet of rennet in 1/4 cup (60 ml) of cool non-chlorinated water. Boil water for 15-20 minutes to dechlorinate it. Let it cool in the fridge before you dissolve the rennet in it.^{[3]
X
Research source}
- You can order rennet online or visit a specialty shop that carries cheesemaking supplies.
4
Add the dissolved rennet to the milk after it has sat for 1 hour. Stir the mixture with a kitchen spoon or ladle vigorously for 15-20 seconds to mix it thoroughly. The milk will begin to thicken after 10 minutes.^{[4]
X
Research source}
5
Let the milk mixture sit covered overnight at room temperature. This will allow the milk to coagulate and the curds to develop. Put the pot somewhere out of the way and make sure it is securely covered with the lid so that no contaminants can get in.^{[5]
X
Research source}
6
Check the break between the curd and the whey the next morning. The milk will look gelled and some of the whey, or liquid, will have separated. Insert a clean finger or knife into the curd and slowly pull it out to see how the curd breaks.^{[6]
X
Research source}
- The curd should split neatly and the whey should look opaque.

Part 2

Part 2 of 3:

Draining and Molding the Cheese Curds

1
Cut the curd into roughly ¹⁄₂ inch (1.3 cm) cubes. Start at one side and cut straight down to the bottom with a long-bladed knife. Make a rough grid pattern of cubes in the curd.^{[7]
X
Research source}
- The cheese curds will move around as you cut them, so don’t worry about making each one a perfect cube.
2
Reach to the bottom with a clean hand and gently lift the curds to stir. Cut the large pieces that appear with a knife so that they are roughly ¹⁄₂ inch (1.3 cm) cubes. Any pieces you miss will break up later in the process so don’t worry too much about getting every piece perfect.^{[8]
X
Research source}
3
Let the cut curds sit for 10-15 minutes then pour them into cheesecloth. Line a strainer with cheesecloth or a sterile handkerchief. Place it above a bowl or container and let all the whey strain out for 2-4 hours.^{[9]
X
Research source}
- You can let the whey strain out either at room temperature or in the fridge.
- Save the drained whey in the bowl or container.
4
Place the drained curds into a bowl and mix in 1/2 tsp (2 g) of salt. Break up the cheese curds as you mix in the salt. Mix it thoroughly with clean hands until all of the curds are broken up and the salt is evenly distributed.^{[10]
X
Research source}
5
Press the cheese into a mold lined with cheesecloth. Place the curds inside, fold over the ends of the cloth, place the end on top, and place a weight on top of that. Let it sit overnight.^{[11]
X
Research source}
- To make a homemade cheese mold, cut the ends out of a smooth-sided 4 x 5 inch tin and save one of the cut ends.
- You can use a sterile handkerchief instead of cheesecloth in the mold.

Part 3

Part 3 of 3:

Brining and Storing the Feta

1
Prepare pickling whey brine and let it sit for 12-24 hours. Mix 20 oz (591 ml) of the whey that you saved with 5 tablespoons (73.9 ml) of salt and stir to dissolve. Let the whey brine sit out at room temperature, covered, for 12-24 hours to make it acidic.^{[12]
X
Research source}
- The brine must be acidic or else the cheese will melt on the surface.
2
Cut the cheese into 1.5 inch (3.8 cm) cubes and put them in a wide jar. Place the cheese on cutting board and use a sharp knife to cut it evenly. Leave a bit of space at the top of the jar because you will cover the cheese with brine.^{[13]
X
Research source}
- A mason jar is a good option for storing your homemade feta.
3
Pour brine into the jar with the cheese to cover it. Let the cheese age for 2 weeks in the refrigerator. Always store the cheese in the refrigerator and keep it submerged in brine.^{[14]
X
Research source}
- The feta will stay good for up to 1 year as long as you keep it in the fridge and in brine.
- The cheese will become drier and more easy to crumble with time.

Community Q&A

Question

Can the brine from feta cheese be reused to cook say rice?

Community Answer

Yes, you can use the whey for various things. You could use it when making bread, simply replace water with whey. You can also use it for starting new cheese cultures, always save some whey in refrigerator. Excess whey can be used for tomatoes and potato bushes -- simply poor it on the soil.
Question

Can whole milk be used in place of goat milk while making feta cheese?

Community Answer

You can use cow's milk, but it won't taste the same or be nearly as rich.
Question

Can citric acid be used instead of rennet? If answer is yes, in what quantity?

Community Answer

Yes. Try 6 teaspoons to 3L of milk. Citric acid is much less effective than milk, thus the larger quantity.

Warnings

Do not use city tap water to dissolve rennet as it most likely contains chlorine that will make the rennet fail.

⧼thumbs_response⧽
Helpful 44 Not Helpful 10
If the culture becomes contaminated at any point, the likelihood of contracting food poisoning from the cheese is greatly increased.

⧼thumbs_response⧽
Helpful 25 Not Helpful 30