Cooking Brown Rice in a Rice Cooker: Preparation, Cleanup & More

Tired of scorching your brown rice on the stove or ending up with dry, crunchy grains? If you’re looking for the perfect, tender, fluffy brown rice, you have to try making it in a rice cooker. All you have to do is measure out your rice and water, rinse the grains, and hit “start”—the cooker takes care of the rest! In this article, we’ll show you exactly how to measure and cook your brown rice to perfection, plus the best way to store your leftovers and clean out your cooker once you’re done. Now sit back, relax, and let the rice cooker take care of dinner tonight.

Ingredients

1 cup (210 g) of brown rice (rinsed)
2 cups (473 mL) of water
½ tsp (3.5 g) of salt (optional)

Makes 2-3 servings

Things You Should Know

Measure out a 1:2 ratio of brown rice to water (or broth). Rinse the rice in a strainer under cool water before cooking to avoid a gummy texture.
Add your rice and water to the pot, seal the lid, and press the “start” or “on/off” button. If your rice cooker has more advanced settings, consult your user manual.
Let your rice sit in the cooker with the lid on for 10 minutes after cooking. Then, fluff the rice with a rice paddle or spatula and serve!
Scrape out the dried rice from the pot once it's cool, then wash the inner pot and lid with soap and hot water. Dry completely before replacing.

Part 1

Part 1 of 3:

Measuring & Rinsing the Rice

1
Measure out 1 cup (210 g) of long- or medium-grain brown rice. Use your own dry measuring cup to get an accurate measurement since the scoops that come with most rice cookers only hold ¾ cup (158 g) of rice.^{[1]
X
Research source} One cup of uncooked rice makes about 1.5 cups of cooked rice.^{[2]
X
Research source}
- Use the rice cooker scoop to make a specific number of servings (1 scoop = 1 serving) or to measure out ratios (1 scoop of rice to 2 scoops of water).^{[3]
  X
  Research source}
- Go for long- or medium-grain rice to get individual, slightly firm grains after cooking. Short grain rice tends to be stickier and clump together (like sushi rice).
2
Rinse the rice under cool water until the water runs mostly clear. Dump your measured out rice into a fine strainer or sieve and place it under your faucet. Run cool water over the rice while you mix it around with your fingers or shake the strainer to make sure all of the rice gets rinsed.^{[4]
X
Research source}
- The water may look cloudy or milky at first. Keep rinsing until it is mostly clear.
- Shake out as much excess water as you can when you’re done rinsing.
- Rinsing removes any debris from the rice as well as the starchy outer layer, which causes rice to clump together or become “gummy” while it cooks.
Advertisement
3
Add your rinsed rice to the rice cooker. Spread the rice over the bottom of the pot so that it cooks as evenly as possible. Try not to add more rice than the cooker can hold at once (consult your user manual or look for a “Max Fill” line inside the pot).^{[5]
X
Research source}
- If you need to make an extra large amount of rice, plan ahead and make it in batches rather than accidentally overloading the rice cooker.

Part 2

Part 2 of 3:

Cooking & Serving the Rice

1
Add 2 cups (473 mL) of water or broth and a pinch of salt to the pot. For brown rice, always add 1.5 to 2 parts water for every 1 part of rice (regardless of how you’re cooking it).^{[6]
X
Research source} Use tap water or opt for veggie, chicken, or beef broth for more flavorful rice (use the same amount of broth as you would water).^{[7]
X
Research source}
- Add ½ tsp (3.5 g) of salt per 1 cup of rice you’re cooking. The salt is optional, but adds more flavor.
- If you’re adding additional flavorings or seasonings, like a tablespoon (15 mL) of olive oil or butter or a teaspoon (5 mL) of vinegar, add them with the water.^{[8]
  X
  Research source}
- If you used the rice cooker scoop to measure your rice, fill the pot with water up to the appropriate line inside the pot for the number of scoops you’re preparing.
2
Turn on the rice cooker and wait about 45 minutes for perfect brown rice. Once you’ve added all your ingredients, seal the lid tightly and press “start” to use the rice cooker. Most basic rice cookers only have a “start” or “on/off” button, but some may have separate settings for brown rice specifically. Consult your user manual for directions for your rice cooker model.^{[9]
X
Research source}
- Keep the lid on during the entire cooking process (don’t lift it up to check on the rice).
- The exact cook time depends on your rice cooker and the amount of rice you’re making. Since brown rice is tougher than white rice, it needs to cook longer.
- The cooker will shut off when the water evaporates and the internal temperature rises. For brown rice, this usually happens around 45 minutes.
3
Let the rice rest in the cooker with the lid on for 10 minutes. Once the cooker is done cooking, wait for the rice to continue steaming in the pot for about 10 minutes before serving. This lets the rice absorb the last of the moisture in the pot and keeps it from getting dry or crunchy.^{[10]
X
Research source}
- This step isn’t always included in cooking instructions, but it can make a big difference in the quality of your rice!
4
Fluff the rice with a rice paddle (shamoji), spatula, or wooden spoon. Stir the rice from the edges of the pot inward to break up large clumps and release some of the steam trapped in the rice. Steer clear of metal utensils, since they can scratch the nonstick surface of your pot and damage future batches of rice.^{[11]
X
Research source}
- Once your rice is fluffed, plate it up and enjoy!
5
Refrigerate leftover rice in an airtight container for up to 3 days. First, spread your leftovers out on a baking tray so they cool (hot leftovers create condensation in a container, which makes them go bad faster). If you plan on eating the rice within 3 days, store it in the refrigerator.^{[12]
X
Research source}
- Freeze your rice in a plastic freezer bag to keep it for more than 3 days (press all of the excess air out before you seal it).
6
Reheat leftover rice in 30-second intervals in the microwave. Sprinkle about a teaspoon (5 mL) of water over the rice to remoisten it and loosen grains that are stuck together. Then, pop your rice in the microwave on medium power. Check and stir the rice every 30 seconds until it’s hot and ready to eat.^{[13]
X
Research source}
- Alternatively, heat the rice on the stove over medium heat. Stir constantly to keep the grains moving (just be careful not to mash them).
- Reheat frozen rice the same way as refrigerated rice. If you’re preparing something hot like a soup or casserole, add frozen rice directly into the dish.

Part 3

Part 3 of 3:

Cleaning the Rice Cooker

1
Leave the lid off the cooker once you’re done serving so it cools quickly. Unplug the cooker and wait until the inside is cool to the touch before you try to clean it (usually 30-60 minutes). By the time you’re done eating, for example, the insides should be dried out and cool enough to handle safely.^{[14]
X
Research source}
- For your safety, never try to clean the rice cooker while it’s still hot or plugged in. This could result in burns to your hands or electric shock.
2
Scrape away any dried rice from the bottom and sides of the cooker. Use plastic, rubber, or wooden utensils (or your hands) to dislodge the dried rice. Then, remove the inner bowl and dump the rice bits directly into the trash can or garbage disposal. Remove as much as you can to make wiping the bowl clean easier.^{[15]
X
Research source}
- Most rice cookers have a nonstick inner coating. Avoid using metal utensils to scrape it clean, since these can scratch or damage your cooker.
3
Remove the inner pot and lid and hand wash them with soap and hot water. Unless your cooker has special instructions, scrub them like you would any other dish. Steer clear of steel wool or other abrasive scrubbers that can scratch the pot. Rinse the pot and lid and wipe dry with a towel.^{[16]
X
Research source}
- Make sure the inner pot and lid are 100% dry before putting them back into the cooker.
- If needed, wipe any food spots off the exterior of the cooker with a damp cloth.

Community Q&A

Question

What if I don’t rinse the rice?

wikiHow Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

wikiHow Staff Editor

Staff Answer

Rinsing the rice isn't 100% necessary, but it improves the texture. When you don't rinse rice, the grains are more likely to stick together or get "gummy" once they're cooked.
Question

Does it matter if you use hot or cold water when starting the rice cooker?

wikiHow Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

wikiHow Staff Editor

Staff Answer

Cold water might take a few minutes longer to cook, but it doesn't make a difference in the quality of the end product. The rice cooker will monitor the temperature and steam levels throughout cooking and stop once the water is evaporated.
Question

Any thoughts on substituting chicken/beef stock for water?

wikiHow Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

wikiHow Staff Editor

Staff Answer

Go for it! You can substitute any broth for water to add more flavor. Just make sure to use the same amount of broth as you would water.

Warnings

Don’t use metal utensils to fluff or serve your rice from the rice cooker pot, since metal can scratch and damage the inside lining of the pot.^{[17]
X
Research source}

⧼thumbs_response⧽
Helpful 0 Not Helpful 0
Refrigerate or freeze any leftovers right away. Leaving rice out for too long (or reheating it multiple times) can lead to food poisoning.^{[18]
X
Trustworthy Source
National Health Service (UK)
Public healthcare system of the UK
Go to source}

⧼thumbs_response⧽
Helpful 0 Not Helpful 0