Lambo doors are customized car doors that can be installed to replace standard car doors, primarily on two-door sports cars.[1] Instead of swinging out from the car when opened, Lambo doors swing up or vertically. They are known by many names in the car customizing industry, including Lamborghini, Vertical, scissor, butterfly, switchblade, jack-knife and beetle-wing doors. Many car enthusiasts install these eye-catching doors specifically to draw attention to their sporty cars, or to gain points when showing in the customized category of car shows. Lambo doors are installed with a specialized kit that includes the hinges that allow for the vertical opening. Learn how to install lambo doors by following your specific kit's instructions and the steps outlined in this article.

Steps

  1. 1
    Select Lambo doors that are compatible with the make and model of your car.[2]
    • Be sure to ask the dealer who sells the doors what kit and tools you will need for installation.
  2. 2
    Gather the tools that you will need according to your Lambo door kit instructions.
    • Remember that the tools needed for each kit will vary based on the type of vehicle you have.
    Advertisement
  3. 3
    Remove the necessary parts according to the instructions for your particular kit.
  4. 4
    Take out the stock door stopper to gain access to the door's inner mechanisms.
  5. 5
    Close, lock and tape your door shut while installing the Lambo door kit.
  6. 6
    Remove all necessary items such as stock hinges, metal tabs and rubber casings keeping in mind that each car will vary.[3]
  7. 7
    Cut and roll the fender based on your kit's instructions.
  8. 8
    Install your Lambo door kit hinges.[4]
  9. 9
    Add the Lambo door kit shock absorbers, which will make your new doors operate properly.
  10. 10
    Tighten all bolts and screws securely.
  11. 11
    Try out your Lambo door to make sure it operates correctly.
  12. 12
    Make any necessary adjustments to your Lambo door to ensure that it fits and operates properly.[5]
  13. 13
    Repeat the same process on the other side of your car.
  14. Advertisement

Community Q&A

  • Question
    Can I install Lambo doors on any car?
    Community Answer
    Community Answer
    Yes, but it might need modifications on the car that are irreversible. Be careful, some kits are unsafe and very hard to install.
  • Question
    How do I know if my Lambo can install a door kit?
    Community Answer
    Community Answer
    Be sure to do research to find out ways to know if it can. If you still do not know, or are still unsure it's best to go to the local auto department and ask them about it.
Advertisement

Warnings

  • When considering installing Lambo doors, keep in mind that in certain types of accidents, these doors are more likely to become jammed than standard car doors.
    ⧼thumbs_response⧽
  • Be careful when parking your car with installed Lambo doors in a parking garage. When you open them, they might bump against the ceiling of the garage if it is low.
    ⧼thumbs_response⧽
  • Do not attempt to install Lambo doors until you have read the instructions carefully and understand how to accomplish the job. If you are uncertain about any of the steps outlined, talk to the dealer where you purchased your Lambo doors and ask for clarification.
    ⧼thumbs_response⧽
Advertisement

Things You'll Need

  • Lambo door kit
  • Tools (the kit will advise you what tools you will need)
  • Sturdy tape

About This Article

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 9 people, some anonymous, worked to edit and improve it over time. This article has been viewed 101,834 times.
88 votes - 84%
Co-authors: 9
Updated: December 19, 2019
Views: 101,834
Advertisement