How to Give an Intramuscular Injection

Learning to give an intramuscular (IM) injection may become a necessity if you, or a family member, suffer from an illness that requires injections of medication. The doctor will make this decision as they provide medical care and the doctor or nurse will explain to the caregiver how to give an intramuscular injection. Make sure you follow their instructions and ask them to demonstrate the technique so you can observe.[1]

Part 1
Part 1 of 3:

Proceeding With the IM Injection

  1. Image titled Give an Intramuscular Injection Step 1
    1
    Wash your hands prior to starting the procedure. Good hygiene is important to minimize the risk of infection. Wash your hands with soap and warm water for at least 20 seconds.[2]
  2. Image titled Give an Intramuscular Injection Step 2
    2
    Reassure the patient and explain how the procedure will unfold. Specify the location of the injection you are giving, and describe how the medication will feel once injected if the patient does not already know.[3]
    • Some medications can be initially painful or sting upon injection.[4] Most do not, but it is important for the patient to be aware of this if it is the case to minimize any distress that may ensue from not knowing.
    Advertisement
  3. Image titled Give an Intramuscular Injection Step 3
    3
    Sanitize the area with an alcohol swab. Prior to performing the injection, it is important that the patch of skin over the muscle where the injection will take place is sterilized and clean. Again, this minimizes the chances of an infection following the injection.[5]
    • Allow the alcohol to air dry for 30 seconds. Do not touch the area until you give the injection; if you do, you'll just have to clean the area again.
  4. Image titled Give an Intramuscular Injection Step 4
    4
    Encourage the patient to relax. If the muscle receiving the injection is tense, it will hurt more, so relaxing the muscle as much as possible helps to ensure the least pain felt on injection.[6]
    • It can sometimes be helpful to distract the patient before injecting by asking them questions about their life. When the patient is distracted, their muscle is more likely to be relaxed.[7]
    • Some people also prefer to be positioned in a way in which they cannot see the injection taking place. Seeing the needle approaching can cause worry and distress in some, and will result not only in increased anxiety, but also in tensing of the muscle. To help the patient relax, suggest they look in another direction if they want to.[8]
  5. Image titled Give an Intramuscular Injection Step 5
    5
    Insert the needle into the specific location. Choose a 22- to 25-gauge needle for IM injections.[9] Start by removing the cap, and then insert it smoothly at an angle of 90 degrees to the skin.[10] If you are just learning to give the injection, do not go too quickly, as you want to ensure you do not push the needle in too far and hit the bone.[11] About one-third of the needle should remain exposed.[12] Be careful not to go so fast that you either miss the spot or cause any more damage to the skin than is needed.
    • As you practice and become used to giving the injection, you can increase your speed. The quicker the insertion, the less pain your patient will feel[13] ; however, you do not want to sacrifice safety for speed.
    • It can be helpful to pull up the skin around the injection site with your non-dominant hand (as your dominant hand will be doing the injection) prior to injecting.[14] Pulling up the skin can help you mark your target and make it less painful for the patient when the needle goes in.
  6. 6
    Pull back the plunger before injecting for a dorsogluteal muscle. After injecting the needle but before injecting the medication, pull the plunger back a little. Although this may seem counter-intuitive, it is important because if any blood comes into the syringe when you pull back, it means your needle is located in a blood vessel and not in the muscle.[15] You will need to begin again with a new needle and syringe if this happens.[16]
    • You only need to do this for dorsogluteal muscles since you’re close to the gluteal artery. You don’t need to pull the plunger back for any other IM injections.[17]
    • The medication is designed to be injected into a muscle and not into the bloodstream, so if you see any red color when you pull back you will need to remove the needle and dispose of it. Prepare a new needle and choose a different injection site — don't try to give the shot in the same place.[18]
    • Most often the needle lands in the muscle itself. Rarely does it land in a blood vessel, but it is always best to be safe rather than sorry prior to injecting.
  7. Image titled Give an Intramuscular Injection Step 7
    7
    Inject the medication slowly.[19] While it is best to insert the needle quickly to minimize pain, the opposite is true for the actual injection. This is because the medication takes up space in the muscle, and the surrounding tissue will need to stretch to accommodate the added fluid in the space. Injecting slowly gives more time for this to happen and causes the patient less pain.
    • If the skin is stretched flat, that only use a 5⁄8 in (1.6 cm) needle. If you squeeze and bunch up the muscle around the injection site, then use a 1 in (2.5 cm) needle.[20]
  8. Image titled Give an Intramuscular Injection Step 8
    8
    Pull the needle out at the same angle as you injected it.[21] Do this once you're confident all the medicine has been injected.
    • Press gently on the injection site with the 2 x 2 gauze.[22] The recipient may feel a slight discomfort; this is normal. Have the recipient hold the gauze in place while you dispose of the needle.
  9. Image titled Give an Intramuscular Injection Step 9
    9
    Dispose of the needle properly. Do not throw needles into the trash. You may receive a hard plastic container made especially for used syringes and needles. You can also use a soda bottle or other plastic bottle with a screw lid. Make sure that both the syringe and needle fit into the container easily and cannot break through the sides.[23]
    • Ask your caregiver or a pharmacist what your state or local requirements are for getting rid of used syringes and needles.[24]
    10. Advertisement
Part 2
Part 2 of 3:

Understanding Background Knowledge

  1. Image titled Give an Intramuscular Injection Step 10
    1
    Know the parts of a syringe. It'll be much easier to administer a shot if you understand the mechanics behind what you're doing.
    • Syringes have three main parts: the needle, barrel, and plunger. The needle goes into the muscle; the barrel has markings, either in cc (cubic centimeters) or mL (milliliters), with numbers next to the markings, and it contains the medicine; the plunger is used to get medicine into and out of the syringe.[25]
    • Medication injected intramuscularly (IM) is measured in cm3s or mLs. The amount of medication in a cc is the same as in an mL.[26]
  2. Image titled Give an Intramuscular Injection Step 11
    2
    Know where to give the injection. The human body has a number of spots that are most receptive.[27]
    • Vastus Lateralis Muscle (Thigh): Look at your thigh and divide it into three equal parts. The middle third is where the injection would go. The thigh is a good place to give yourself an injection because it is easy to see. It is also a good spot for children younger than three years old.
    • Ventrogluteal Muscle (Hip): To find the correct location, place the heel of your hand on the upper, outer part of the thigh where it meets the buttocks. Point your thumb at the groin and your fingers toward the person's head. Form a V with your fingers by separating your first finger from the other three fingers. You will feel the edge of a bone along the tips of your little and ring fingers. The place to give the injection is in the middle of the V. The hip is a good place for an injection for adults and children older than seven months.
    • Deltoid Muscle (Upper arm muscle): Completely expose the upper arm. Feel for the bone that goes across the top of the upper arm. This bone is called the acromion process. The bottom of it will form the base of the triangle. The point of the triangle is directly below the middle of the base at about the level of the armpit. The correct area to give an injection is in the center of the triangle, 1 to 2 inches (2.5 to 5.1 cm) below the acromion process. This site should not be used if the person is very thin or the muscle is very small.
    • Dorsogluteal Muscle (Buttocks): Expose one side of the buttocks. With an alcohol wipe, draw a line from the top of the crack between the buttocks to the side of the body. Find the middle of that line and go up 3 inches (7.6 cm). From that point, draw another line down and across the first line, ending about halfway down the buttock. You should have drawn a cross. In the upper outer square you will feel a curved bone. The injection will go in the upper outer square below the curved bone. Do not use this site for infants or children younger than three years old; their muscles are not developed enough.
  3. Image titled Give an Intramuscular Injection Step 12
    3
    Know whom you're injecting. Each person has a place where it is best to receive the shot. Consider a few things before you administer the shot:
    • The person's age. For children and babies up to two years old, the thigh muscle is best. For those three years and older, the thigh or deltoid are both viable options. You should be using somewhere between a 22 and a 30 gauge needle (this will largely be determined by the thickness of the medication — your doctor will tell you which gauge to use).[28]
      • Note: For incredibly small children, a smaller needle is needed. The thigh can also tolerate a larger needle than the arm.[29]
    • Consider previous injection sites. If the person recently received an injection in one area, administer the shot in a different spot on their body. It helps prevent scars and skin damage.[30]
  4. Image titled Give an Intramuscular Injection Step 13
    4
    Know how to fill the needle with medication.[31] Some syringes get pre-filled with the medication. Other times, the medication is in a vial and needs to be drawn up into the syringe. Before administering medication from a vial, make sure you have the right type of medication, it is not expired, and that it is not discolored or has particles floating in the vial. If the vial is new, make sure the seal is not broken.
    • Sterilize the top of the vial with an alcohol swab.
    • Hold the syringe with the needle pointed up, the cap still on. Draw the plunger back to the line indicating your dose, filling the syringe with air.
    • Insert the needle through the rubber top of the vial and press the plunger, pushing the air into the vial.
    • With the vial upside-down and the tip of the needle in the medicine, draw the plunger back again to the proper dose (or a little past if there might be air bubbles). Tap the syringe to move any air bubbles to the top, then push them into the vial. Make sure you still have the correct dose in the syringe.
    • Remove the needle from the vial. If you don't plan on using it right away, make sure you cover the needle with the cap.
    5. Advertisement
Part 3
Part 3 of 3:

Using the Z-Track Technique

  1. Image titled Accept Change Step 5
    1
    Understand the advantages of the Z-track method.[32] When administering an IM injection, the penetrative action of the needle creates a narrow channel, or track, within the tissues. It may be possible for the medication to leak out of the body through this track. Applying the Z-track technique reduces skin irritation and allows for effective absorption by sealing the medication in the muscle tissue.
  2. Image titled Give an Intramuscular Injection Step 14
    2
    Repeat the steps of hand-washing, filling the syringe, and choosing and cleaning the injection site.
  3. Image titled Give an Intramuscular Injection Step 15
    3
    Pull the skin taut 1 inch (2.5 cm) laterally to the side with your non-dominant hand. Firmly hold to keep the skin and subcutaneous tissue in place.
  4. Image titled Give an Intramuscular Injection Step 16
    4
    Insert the needle at a 90° angle into the muscle layer with your dominant hand. Pull back on the plunger slightly to check for blood return, then slowly push to inject the medication.
  5. Image titled Give an Intramuscular Injection Step 17
    5
    Keep the needle in place for 10 seconds. This allows the medication to evenly disperse into the tissue.
  6. Image titled Give an Intramuscular Injection Step 18
    6
    Withdraw the needle in a swift motion and release the skin. A zigzag path is created that closes off the track left by the needle and keeps the medication inside the muscle tissue. As a result, patients should experience less discomfort and lesions at the injection site.
    • Do not massage the site as this can cause the medication to leak, as well as irritation.
    7. Advertisement

Expert Q&A
Did you know you can get expert answers for this article? Unlock expert answers by supporting wikiHow

  • Question
    Where should a 2 ml shot be given?
    Carlotta Butler, RN, MPH
    Carlotta Butler, RN, MPH
    Registered Nurse
    Carlotta Butler is a Registered Nurse in Arizona. Carlotta is a member of the American Medical Writers Association. She received her Masters of Public Health from the Northern Illinois University in 2004 and her Masters in Nursing from the University of St. Francis in 2017.
    Carlotta Butler, RN, MPH
    Carlotta Butler, RN, MPH
    Registered Nurse
    Expert Answer

    Support wikiHow by unlocking this expert answer.

    It depends on if it is an IM injection or subcutaneous (subQ). If you have been instructed that the medication is to be given IM, review the article above. If subQ you can review the sites for subQ injections.
  • Question
    How are vitamin D injections given?
    Carlotta Butler, RN, MPH
    Carlotta Butler, RN, MPH
    Registered Nurse
    Carlotta Butler is a Registered Nurse in Arizona. Carlotta is a member of the American Medical Writers Association. She received her Masters of Public Health from the Northern Illinois University in 2004 and her Masters in Nursing from the University of St. Francis in 2017.
    Carlotta Butler, RN, MPH
    Carlotta Butler, RN, MPH
    Registered Nurse
    Expert Answer

    Support wikiHow by unlocking this expert answer.

    Vitamin D injections are intramuscular, meaning they are delivered deep into the muscle so that the medication reaches the bloodstream quickly.
  • Question
    What are effect of bubbles in a syringe?
    Jurdy Dugdale, RN
    Jurdy Dugdale, RN
    Medical Review Board
    Jurdy Dugdale is a Registered Nurse in Florida. She received her Nursing License from the Florida Board of Nursing in 1989.
    Jurdy Dugdale, RN
    Jurdy Dugdale, RN
    Medical Review Board
    Expert Answer

    Support wikiHow by unlocking this expert answer.

    Bubbles are small air pockets within the injection solution and they should not be injected. Very small amounts of air will do little damage, but larger pockets of air can cause embolisms. As long as you are not injecting into an artery, then a small amount of air can be taken up by the tissues safely. However, avoiding air bubbles when giving an injection is best, so take all of the bubbles out before giving the injection. To do this, pull back on the syringe to release air. You can also try putting more solution than you need into the syringe and discarding some of it, this will help to release the air.
Advertisement

You Might Also Like

Give a Subcutaneous Injection
How to
Give a Subcutaneous Injection
Properly Place a TB Skin Test
How to
Properly Place a TB Skin Test
Give Insulin Shots
How to
Give Insulin Shots
Fill a Syringe
How to
Fill a Syringe
Read Syringes
How to
Read Syringes
Give a B12 InjectionAdministering B12 Injections Safely at Home: A Complete Guide
Inject Into a VeinHow to Inject Yourself: 13 Ways to Stay Safe and Sterile
Reduce Pain After an Injection
How to
Reduce Pain After an Injection
Avoid Bruises from Injections
How to
Avoid Bruises from Injections
Give a Prolia Injection
How to
Give a Prolia Injection
Perform a Self Injection to the Abdomen
How to
Perform a Self Injection to the Abdomen
Give an Injection
How to
Give an Injection
Give a Newborn an IM Injection
How to
Give a Newborn an IM Injection
Give a Shot
How to
Give a Shot
Advertisement

References

  1. ↑ https://www.kpivf.com/content/uploads/2020/01/intramuscular.pdf
  2. ↑ http://www.drugs.com/cg/how-to-give-an-intramuscular-injection.html
  3. ↑ https://opentextbc.ca/clinicalskills/chapter/6-8-iv-push-medications-and-saline-lock-flush/
  4. ↑ https://www.cdc.gov/vaccines/pubs/pinkbook/vac-admin.html
  5. ↑ http://www.drugs.com/cg/how-to-give-an-intramuscular-injection.html
  6. ↑ https://www.teenvogue.com/story/why-do-some-vaccines-hurt-more-than-others
  7. ↑ https://www.nursebuff.com/fear-of-injections/
  8. ↑ https://www.tandfonline.com/doi/pdf/10.1080/24740527.2017.1412254
  9. ↑ https://www.cdc.gov/vaccines/hcp/acip-recs/general-recs/administration.html
  1. ↑ https://opentextbc.ca/clinicalskills/chapter/6-8-iv-push-medications-and-saline-lock-flush/
  2. ↑ https://www.immunize.org/guide/pdfs/vacc-adults-step5.pdf
  3. ↑ https://www.gla.ac.uk/media/Media_678206_smxx.pdf
  4. ↑ https://opentextbc.ca/clinicalskills/chapter/6-8-iv-push-medications-and-saline-lock-flush/
  5. ↑ https://www.nursingtimes.net/clinical-archive/assessment-skills/injection-technique-1-administering-drugs-via-the-intramuscular-route-23-07-2018/
  6. ↑ http://www.drugs.com/cg/how-to-give-an-intramuscular-injection.html
  7. ↑ https://opentextbc.ca/clinicalskills/chapter/6-8-iv-push-medications-and-saline-lock-flush/
  8. ↑ https://www.nursingtimes.net/clinical-archive/assessment-skills/injection-technique-1-administering-drugs-via-the-intramuscular-route-23-07-2018/
  9. ↑ https://fenwayhealth.org/wp-content/uploads/2015/07/COM-1880-trans-health_injection-guide_small_v2.pdf
  10. ↑ https://www.drugs.com/cg/how-to-give-an-intramuscular-injection.html
  11. ↑ https://www.cdc.gov/vaccines/hcp/acip-recs/general-recs/administration.html
  12. ↑ https://myhealth.alberta.ca/Health/aftercareinformation/pages/conditions.aspx?hwid=abl4066
  13. ↑ https://www.fairview.org/patient-education/86535
  14. ↑ http://www.drugs.com/cg/how-to-give-an-intramuscular-injection.html
  15. ↑ https://www.fda.gov/medical-devices/safely-using-sharps-needles-and-syringes-home-work-and-travel/dos-and-donts-proper-sharps-disposal
  16. ↑ http://www.drugs.com/cg/how-to-give-an-intramuscular-injection.html
  17. ↑ https://sciencing.com/how-to-read-measurements-on-an-ml-syringe-12581405.html
  18. ↑ http://www.drugs.com/cg/how-to-give-an-intramuscular-injection.html
  19. ↑ https://www.chop.edu/news/make-sure-you-choose-proper-needle-length-when-vaccinating-your-patients
  20. ↑ http://www.immunize.org/catg.d/p2020.pdf
  21. ↑ http://www.drugs.com/cg/how-to-give-an-intramuscular-injection.html
  22. ↑ https://www.nlm.nih.gov/medlineplus/ency/patientinstructions/000530.htm
  23. ↑ http://www.healthline.com/health/z-track-injection

About This Article

Luba Lee, FNP-BC, MS
Co-authored by:
Luba Lee, FNP-BC, MS
Board-Certified Family Nurse Practitioner
This article was co-authored by Luba Lee, FNP-BC, MS. Luba Lee, FNP-BC is a Board-Certified Family Nurse Practitioner (FNP) and educator in Tennessee with over a decade of clinical experience. Luba has certifications in Pediatric Advanced Life Support (PALS), Emergency Medicine, Advanced Cardiac Life Support (ACLS), Team Building, and Critical Care Nursing. She received her Master of Science in Nursing (MSN) from the University of Tennessee in 2006. This article has been viewed 579,726 times.
3 votes - 47%
Co-authors: 18
Updated: November 30, 2021
Views: 579,726
Categories: Injections

Medical Disclaimer

The content of this article is not intended to be a substitute for professional medical advice, examination, diagnosis, or treatment. You should always contact your doctor or other qualified healthcare professional before starting, changing, or stopping any kind of health treatment.

Article SummaryX

Before you give an intramuscular injection, wash your hands with soap and warm water and sanitize the area with an alcohol swab to prevent infection. Next, remove the cap and carefully insert the needle perpendicular to the skin. Then, pull back the plunger a little and inject the medication slowly. After you’ve made the injection, pull the needle out at the same angle you inserted it, and press on the injection site with a small piece of gauze to prevent bleeding. Finally, make sure to dispose of the needle properly in a special needle receptacle. To learn how to talk to your patient and calm them down before giving an injection, read more from our Nurse co-author!

Did this summary help you?
Advertisement