This article was co-authored by Scott St Gelais. Scott St Gelais is an IT Consultant and the Owner of Geeks in Phoenix, Arizona. With over two decades of experience, Scott specializes in computer service and repair, development, computer graphics, and website authoring. Scott received his Technical Associates Degree from High Tech Institute and completed the IT Support Professional Certificate by Google. Geeks in Phoenix is a member of the Microsoft Partner Network and an Intel Technology Provider Gold Partner.
This article has been viewed 433,577 times.
While you can format any drives connected to your computer in Windows 8, you can't format the drive partition that actually contains the Windows 8 files. To do this, you'll need to either start an operating system installation so that the drive is formatted, or use a drive erasing program like DBAN.
Steps
Formatting a Hard Drive to Install Windows 8
-
1Backup any important data. Formatting your hard drive will delete everything on it, so make sure that all of your important files are backed up somewhere safe. Click here for instructions.
-
2Insert your Windows 8 DVD. The easiest way to format your hard drive is to reinstall your operating system, which will format the drive in the process. You will need your Windows 8 installation DVD in order to do this.[1]
- Note: This guide will walk through the steps for formatting and installing Windows 8, but you can use this method with any version of Windows or Linux. Most versions of both Windows and Linux have very similar installers that will guide you through the process.
- If you only have an ISO file for your operating system, click here for instructions on burning it to a DVD so that you can boot from it.
Advertisement -
3Restart your computer.
-
4Open your computer's BIOS menu before Windows boots. The key to open the BIOS menu is typically F2, F10, F11, or Del. Your computer will display the proper key before Windows loads.
- If your computer is booting too fast to enter the BIOS, click here for instructions on forcing the Advanced Startup menu to appear.
-
5Open the BOOT menu in your BIOS. This will allow you to change the order of devices that your computer tries to boot from.
-
6Set your DVD drive as the primary drive. This will make your computer try to boot from the DVD first, allowing you to start the Windows 8 installation.
-
7Save your changes and exit the BIOS. Your computer will reboot.
-
8Press any key when prompted to start the Windows 8 installation. The setup program may take a few minutes to load.
-
9Click the "Install now" button. This will begin the installation process.
-
10Enter your Windows 8 product key. This is a 25-character key that is unique to your copy of Windows. You will need this key in order to proceed with the installation.
- You can usually find the key on your installation disc's case, affixed to your computer, or in the confirmation email for your online purchase. It would also be tied to your Microsoft account.[2]
-
11Click "Custom" asked what kind of installation you want to do. This will allow you to format your drive before reinstalling Windows 8.
- In general, it is recommended that you never select an "Upgrade" installation. While this will save your data and installed programs, it will often lead to errors and software conflicts.
-
12Click "Drive options (advanced)". This will not be present if you are installing Windows 8.1.
-
13Select the partition that you want to format for Windows 8. If you are reinstalling Windows 8, select the drive that currently contains Windows 8.
-
14
-
15Click .Next to proceed with the Windows 8 installation. For more details on installing Windows 8, click here.
Wiping and Formatting the Drive
-
1Download DBAN. DBAN (Darik's Boot and Nuke) is a free hard driver eraser that will completely wipe the entire hard drive containing Windows 8. The hard drive will be empty and need to be either initialized by another operating system for storage or have an operating system installed on it.
- This will delete everything on the drive, so make sure anything you need to save has been properly backed up. You will not be able to use data recovery software on the drive afterwards to retrieve anything you forgot.
- If Windows 8 is your only operating system, you won't be able to use the computer until you install a new operating system or reinstall Windows 8.
- Do not use this method if you have a solid state drive (SSD). If you are formatting an SSD, the best way is to simply reinstall your operating system on it. Do not use traditional data-wiping methods when trying to completely format an SSD. These can drastically reduce the lifespan and may not actually remove any data.
-
2Burn the DBAN image to a blank DVD. DBAN is downloaded in ISO format, which is a disc image file. This allows you to burn it to a disc so that you can boot your computer from it. You can use a free burning tool like ImgBurn to burn the ISO to a disc. Click here for detailed instructions.
-
3Reboot your computer. You will need to open your BIO settings to change the boot order.
-
4Press your BIOS setup key before Windows loads. This is typically F2, F10, F11, or Del. Your computer will display the proper key before Windows loads.
- If your computer is booting too fast to enter the BIOS, click here for instructions on forcing the Advanced Startup menu to appear.
-
5Open the BOOT menu in your BIOS. This will allow you to change the order of devices that your computer tries to boot from.
-
6Set your DVD drive as the primary drive. This will make your computer try to boot from the DVD first, loading DBAN.
-
7Save your changes and exit the BIOS. Your computer will reboot and DBAN will start.
-
8Press .↵ Enter to start DBAN. DBAN will take a few moments to load.
-
9Use the arrow keys and then press .Space to select the drive you want to erase. If you have multiple drives, be absolutely sure that you have the right drive selected. You can use the drive sizes to help determine which drive is which.
-
10Set your wipe settings. There are several settings you can change, but most users can simply leave everything at default.
- Press P to open the "PRNG" menu. This stands for Pseudo Random Number Generator, which is the algorithm used to wipe the drive. There are two different algorithms to choose from.
- Press M to open the "METHODS" menu. These are the number of passes that DBAN will make over the drive. More passes means a more secure erase, but also significantly increases the time it will take. If you're just wiping the drive to reinstall, you can choose one of the lighter-security methods. If you're wiping to erase sensitive data before recycling the drive, select one of the more secure methods.
- Press R to set the number of "ROUNDS". This is the number of times the wipe process will be run. More rounds means a more secure wipe.
-
11Press .F10 to start wiping the drive. DBAN will use the methods you picked to begin overwriting all of the sectors on your drive. You will be able to see the time remaining in the upper-right corner.
-
12Use or dispose of your newly-wiped hard drive. Now that your hard drive is wiped, you can move on to doing whatever it is you want to do with it.
- If you want to reinstall Windows 8 or install another operating system on it, click here. This will format the drive and install the operating system. If you wiped your only hard drive with an operating system installed, you'll need to install an operating system before you can use it again.
- If you want to use the drive as storage for another operating system, click here for instructions on formatting it for use as storage.
- If you want to recycle your computer, click here.
- If you want to sell your computer, click here.
Community Q&A
-
QuestionHow can I repair a laptop if the screen of the laptop will turn off quickly?Community AnswerGo to Control Panel > Power Options > 'Choose when to turn off the display' (Shown on the left bar) and adjust to your liking.
Things You'll Need
- Windows Bootable Installation Media (Usb or Optical Disc)
References
- ↑ http://windows.microsoft.com/en-us/windows-8/clean-install
- ↑ Scott St Gelais. IT Consultant. Expert Interview. 27 July 2021.
- ↑ Scott St Gelais. IT Consultant. Expert Interview. 27 July 2021.
- ↑ http://lifehacker.com/how-to-erase-and-format-a-hard-drive-1525128357
About This Article
1. Back up your data.
2. Boot from the Windows 8 DVD.
3. Click Install now.
4. Enter your product key.
5. Click Custom.
6. Click Drive options (advanced).
7. Select a partition and click Format.
8. Click Next.