Download Audio Download Audio

Knowing how to estimate roofing materials is important. Not only will it help eliminate waste, but it will also ensure that you buy just enough for the roofing job. You’ll have to calculate your roof area, or the overall size of your roof, to determine the amount of materials you’ll need. This wikiHow will show you how to estimate roofing materials for your next project.

Part 1
Part 1 of 3:

Estimating Shingles

  1. 1
    Find the square footage of the roof. Measure the length and width of each portion of the roof, multiply length by width for each plane, and then add the planes together for the total square footage.[1]
  2. 2
    Determine the total number of squares. Divide the total footage by 100 to determine the number of “squares” in the roof.
    Advertisement
  3. 3
    Determine the bundles of shingles needed to cover the roof. It takes 3 bundles to cover a square if you use 3-tab shingles, the most common type.[4]
  4. 4
    Account for waste. Add 10% to the shingle estimate to account for waste.
    • If your roof has hips and valleys, make it 15% because of waste in cutting shingles to fit the valleys.
  5. Advertisement
Part 2
Part 2 of 3:

Estimating Felt Underlayment (Tar Paper)

  1. 1
    Find the square footage of the roof. Measure the length and width of each portion of the roof, multiply length by width for each plane, and add the planes together for the total square footage.
    • If you’re just replacing some old shingles, you may not need to purchase underlayment. However, this is a must if you’re installing a new roof.
  2. 2
    Find the number of squares. Roofers measure surfaces in squares of 100 square feet (9.29 square meters). Divide the total footage by 100 to find the number of squares in the roof.
  3. 3
    Determine the number of rolls of underlayment needed. The #15 type is most commonly used, and one roll of #15 underlayment covers 4 squares.[5]
    • If you’re using #15 underlayment and your roof slope is greater than 4:12, use 1 layer. If the slope is between 3:12 and 4:12, double the amount and put down 2 layers.
  4. Advertisement
Part 3
Part 3 of 3:

Estimating Other Materials

  1. 1
    Measure for drip edge. This metal strip, which goes beneath the underlayment, protects the edge of the roof from rot. You'll need the measurements of the rakes and eaves of the roof (side edges and bottom edge). Use a rake edge for the side of the house as well.
  2. 2
    Estimate how many roofing nails you'll need. At 4 nails per field shingle, that’s about 320 nails per square.[6] You will also need 5 nails for each starter shingle.
    • For high-wind areas, use 6 nails per shingle, or 480 nails per square.
    • Inquire at the hardware store regarding the size of nail you’ll need and how many pounds or kilograms you’ll need of that size; the number of nails per pound or kg differs. The nails should be long enough to go 34 inch (1.9 cm) into the roof.
    • Inquire at the hardware store regarding the amount of underlayment nails required. Always use 1 in (2.5 cm) nails. The nails should be 12 inches (30 cm) apart along the edges and 24 inches (61 cm) apart in the middle of the underlayment strip.
  3. 3
    Gauge the amount of hip and ridge cap shingles. While you can order special hip and ridge cap shingles, you can make your own by cutting a 3-tab shingle into 3 pieces. A bundle of 3-tab shingles will cover 35 feet (11 m).[7]
  4. 4
    Take other miscellaneous costs into account. Depending on the type of roof and your supplier, you may have some other costs to consider. Some of your other costs may include:
    • Venting. A venting system plays a crucial role in maintaining the integrity of the roof during hot and cold weather.[8] *Flashing. Aluminum or steel material that is used to cover roof joints and prevent water from getting in.[9]
    • Ice/water shield. An ice shield is only necessary if you live in an area that is prone to ice and snow in the winter.[10]
    • Boots. These are required to go around any pipes sticking through the roof.
    • Delivery charge for your materials (if there is one).
  5. Advertisement

How Do You Measure the Dimensions of Your Roof?

Expert Q&A
Did you know you can get expert answers for this article? Unlock expert answers by supporting wikiHow

  • Question
    What is the purpose of roof vents?
    David Bitan
    David Bitan
    Roofing Contractor & Maintenance Professional
    David Bitan is a roofing professional, licensed contractor, and the owner and founder of Bumble Roofing based in Southern California. With over 12 years of construction industry experience, David specializes in restoring, repairing, and maintaining residential, commercial, and industrial roofs. With over 60 years of combined experience, Bumble Roofing provides easy, friendly services to structures including residential, commercial, industrial, multi-family, and government buildings along with hospitals, hotels, and churches.
    David Bitan
    Roofing Contractor & Maintenance Professional
    Expert Answer

    Support wikiHow by unlocking this expert answer.

    Roof vents allow for air flow so your roof doesn't get too hot or too cold. In extreme temperatures, a roof vent helps protect the integrity of your roof.
  • Question
    Is the square footage of a house the same as the roof?
    David Bitan
    David Bitan
    Roofing Contractor & Maintenance Professional
    David Bitan is a roofing professional, licensed contractor, and the owner and founder of Bumble Roofing based in Southern California. With over 12 years of construction industry experience, David specializes in restoring, repairing, and maintaining residential, commercial, and industrial roofs. With over 60 years of combined experience, Bumble Roofing provides easy, friendly services to structures including residential, commercial, industrial, multi-family, and government buildings along with hospitals, hotels, and churches.
    David Bitan
    Roofing Contractor & Maintenance Professional
    Expert Answer

    Support wikiHow by unlocking this expert answer.

    No, your roof will be more square footage than your house because a roof has slopes and pitches.
  • Question
    How do I calculate how much drip edge I need for a gable roof?
    Mark Spelman
    Mark Spelman
    Construction Professional
    Mark Spelman is a General Contractor based in Austin, Texas. With over 30 years of construction experience, Mark specializes in constructing interiors, project management, and project estimation. He has been a construction professional since 1987.
    Mark Spelman
    Construction Professional
    Expert Answer

    Support wikiHow by unlocking this expert answer.

    The drip edge metal is only used at the bottom edge of roofs - near the gutters. Measure the length and add 10% to find how much drip edge you will need.
Advertisement

References

  1. http://www.finehomebuilding.com/2002/11/01/dont-fall-short-on-shingles-how-to-estimate-materials-for-roofing-projects
  2. David Bitan. Roofing Contractor & Maintenance Professional. Expert Interview. 14 July 2020.
  3. David Bitan. Roofing Contractor & Maintenance Professional. Expert Interview. 14 July 2020.
  4. http://www.finehomebuilding.com/2002/11/01/dont-fall-short-on-shingles-how-to-estimate-materials-for-roofing-projects
  5. http://www.roofhelp.com/calcmatASx.html
  6. http://www.roofhelp.com/calcmatASx.html
  7. http://www.roofhelp.com/calcmatASx.html
  8. David Bitan. Roofing Contractor & Maintenance Professional. Expert Interview. 14 July 2020.
  9. https://www.thisoldhouse.com/ideas/roof-flashing

About This Article

David Bitan
Co-authored by:
Roofing Contractor & Maintenance Professional
This article was co-authored by David Bitan. David Bitan is a roofing professional, licensed contractor, and the owner and founder of Bumble Roofing based in Southern California. With over 12 years of construction industry experience, David specializes in restoring, repairing, and maintaining residential, commercial, and industrial roofs. With over 60 years of combined experience, Bumble Roofing provides easy, friendly services to structures including residential, commercial, industrial, multi-family, and government buildings along with hospitals, hotels, and churches. This article has been viewed 737,239 times.
24 votes - 84%
Co-authors: 24
Updated: November 6, 2022
Views: 737,239
Categories: Building Roofs
Article SummaryX

To estimate roofing materials, start by finding the total square footage of the roof and divide the number by 100 to determine the number of "squares" in the roof. Since it takes 3 bundles of shingles to cover a square, plan to purchase 3 bundles for each square. Then, add 10% to the number to account for waste. Using the number of squares that you previously counted, plan for 1 roll of under-paper to cover 4 squares. For tips on estimating other materials, like nails and ridge shingles, read on!

Did this summary help you?
Advertisement