This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow's Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards.
wikiHow marks an article as reader-approved once it receives enough positive feedback. In this case, 89% of readers who voted found the article helpful, earning it our reader-approved status.
This article has been viewed 2,557,798 times.
Learn more...
Nothing ruins the taste of a good smoke like a dirty bong. Fortunately, there are some pretty easy and reliable ways to clean your bong both generally and extensively. To make and keep your bong clean, do a basic cleaning, get those tough areas and stains, and take good care of your bong.
Steps
Doing a Basic Cleaning
-
1Gather supplies. Before cleaning your bong, you'll need to round up some supplies, including: a sink or basin; coarse salt, rice, or baking soda; rubbing alcohol, vinegar, or another cleaner; clean water; and latex gloves.[1]
- Glass cleaners work great as well. You could use Aqua Glass Works Cleaner or Wellcann Glass Cleaner.
- You can also buy cleaning solutions specifically made for bongs from Headshop. Options include Pink Formula.
-
2Empty the bong and rinse and fill it with warm water. While wearing your latex gloves, empty out your bong as well as you can. Pour out old bong water and remove any spent herb. Then give it a good rinse with warm water to remove any remaining solid particles. Finally, fill the bong part way with some of the warm water you're using.Advertisement
-
3Disassemble your bong. Take it apart so that the individual pieces can be cleaned. Remove all movable parts, including the pipe and mouthpiece. As you take your bong apart, check for any damage such as chips or cracks. You'll need to replace any damaged pieces before using your bong again.[2]
-
4Add coarse salt and rubbing alcohol to your bong. Next, you'll need to add an abrasive and a cleaner into the base of the bong so that they can work together to clean the inside. Coarse salt and isopropyl alcohol typically work best for this, but you can also use vinegar and rice or baking soda. The stronger the rubbing alcohol, the better. Ideally, you would use one over 90%.[3]
- Alternatively, you can use something like Formula 420, in which case skip the salt. Pour it in and proceed as normal.
-
5Plug the holes and shake it up. Use your hands, fingers, and thumbs to plug or block the open holes of the bong so that your abrasive and cleaner don't cause a big mess. Shake it for about five minutes to get the best possible result.
-
6Rinse and repeat. Empty the cleaning solution into a sink and rinse it out completely with clean water. Repeat the cleaning process as many times as you need to, but once is usually enough.[4]
Cleaning Tough Areas and Stains
-
1Presoak your bong in warm water and dish soap. If your bong is especially dirty, it might be best to soak it in a sink, basin, or bathtub full of warm water and just a squirt of dish soap. Let your bong soak for about an hour or two before you start the cleaning process.[5]
- Be very conservative with the dish soap. If you use too much, your bong might produce an unpleasant soapy aftertaste the next several times you smoke.
-
2Soak small pieces in plastic bags. Put all of the small pieces of your bong into resealable bags with about a tablespoon of coarse salt. Fill the resealable bag with enough rubbing alcohol to completely submerge the pieces. Shake the bags for a few seconds and then let the pieces soak for several minutes. Then, rinse them off with clean water.[6]
-
3
-
4Get rid of water stains with lemon juice. To easily remove water stains in your bong, put some warm water and lemon juice in the base and swish it around. Then, rinse your bong out with cold water.[8]
Taking Care of Your Bong
-
1Use filtered water in your bong. The minerals in tap water and unfiltered spring water can cause water stains to form in your bong. To prevent this, always use filtered water when you smoke. It's also a good idea to use filtered water when cleaning your bong, or at least rinse it with filtered water after cleaning.
-
2
-
3Clean your bong once a week. This is another way to keep mold from forming and ultimately avoid getting mold stains. Try to do at least a brief cleaning weekly to keep your bong squeaky clean.[10]
-
4Store your bong in a bong bag or hard case. Since your bong is made of glass, it's susceptible to cracking and breaking if you aren't careful. When storing and traveling with your bong, consider keeping it in a protective bag or case to keep anything from happening to it.
Warnings
- Be careful if you're cleaning it in a sink. The resin can coat the sink and it can be hard to clean.⧼thumbs_response⧽
- Most cleaners are flammable, so never use them when you're smoking.⧼thumbs_response⧽
Things You'll Need
- Latex gloves
- Clean water
- Plastic resealable bags
- Cleaner: Isopropyl alcohol, vinegar, or Formula 420
- Abrasive: coarse salt, uncooked rice, or baking soda
- Dish towel
- Pipe cleaners or plastic q-tips
- Liquid dish soap
- Bowl, basin, or sink large enough to submerge all parts
References
- ↑ https://cbdoracle.com/cannabis/how-to-clean-your-bong/
- ↑ https://cbdoracle.com/cannabis/how-to-clean-your-bong/
- ↑ https://www.cleanbong.ca/bong-cleaning-blog/70-vs-99-iso-alcohol-for-cleaning-bongs
- ↑ https://potguide.com/pot-guide-marijuana-news/article/how-to-clean-a-bong-or-pipe-isopropyl-alcohol-vs-specialty-420-cleaners/
- ↑ https://www.insider.com/guides/home/how-to-clean-a-bong
- ↑ https://cbdoracle.com/cannabis/how-to-clean-your-bong/
- ↑ https://potguide.com/pot-guide-marijuana-news/article/how-to-clean-a-bong-or-pipe-isopropyl-alcohol-vs-specialty-420-cleaners/
- ↑ https://www.tripboba.com/article_how-to_how-to-clean-a-bong-a-step-by-step-instructions-you-can-follow-to-clean-a-bong.html
- ↑ https://youtu.be/PkmDWNUAB24?t=100
About This Article
To clean a bong, start by emptying it and rinsing it out with warm water to remove any solid particles. Once the old bong water and any spent herb is gone, fill the bong part way with some warm water. Next, take your bong apart and add an abrasive, like coarse salt or rice, and a cleaner, like isopropyl alcohol or vinegar, to the base of your bong. Then, plug the holes and shake it, allowing the abrasive and cleaner to scrub away any grime. After 5 minutes, rinse the bong out and repeat the cleaning process if necessary. To learn how to clean stains on your bong, keep reading!