How to Clean Wood Doors

Co-authored by Michelle Driscoll, MPH

Last Updated: August 10, 2021 References

Wood doors are common in many homes. They are easy to clean, but there are some specific things you should do to keep them looking nice and in top condition. To clean your wood doors, you’ll need to dust regularly and wipe them down with mild dish soap every so often. You should also consider re-staining your wood doors if they become too grimy or unsightly.

Part 1

Part 1 of 3:

Cleaning Minor Dirt and Grime

1
Dust away the cobwebs. Doors often get covered in layers of dust and cobwebs quickly – especially if they are in the corner or on an outside wall. Use a duster to periodically dust off your wood doors to keep the dust and cobwebs from building up over time.^{[1]
X
Research source}
- Try to dust your wood doors, especially in the grooves of the door, once every week or so to keep them looking nice. This will also help prevent larger stains from forming.
- This is especially important for exterior doors because it will help keep spiders and insects from congregating near the entrance to your home.
2
Use a mild dish soap. For minor cleaning, you should be able to use a bit of mild dish soap mixed with hot water. Dip a nonabrasive sponge into the water and scrub the surface of your wood door.^{[2]
X
Research source}
- You can also use or a small brush (like a toothbrush) to get into corners and crevices in the door.
- When you finish, make sure you rinse all of the soapy residue away with hot water.
Advertisement
3
Clean around the edges. Open the wood door and use a clean, damp cloth to wipe off the edges all around the door frame. You may need to rinse the cloth as you go to keep it clean enough to do the job, especially if there is significant buildup of dust or dirt.^{[3]
X
Research source}
- You can add a bit of mild dish soap to your damp rag if the dirt seems resistant to wiping. But be sure to clean off all of the soapy residue when you finish.

Part 2

Part 2 of 3:

Cleaning Tougher Stains

1
Rub the surface with mineral spirits. Apply a few drops of mineral spirits to a clean, soft rag until the cloth feels damp. Wipe the surface of the wood door with the moistened rag, always going with the grain of the wood. This should work to help remove any dirt or grime buildup.^{[4]
X
Research source}
- Mineral spirits are also called paint thinner. You can purchase this product at any home improvement store.
2
Wipe on some liquid furniture polish. Apply some liquid furniture polish on the surface of the wooden door and use a clean dish cloth to rub it into the grain of the wood. This will help remove any existing stains and restore the wood’s natural sheen.^{[5]
X
Research source}
- This is especially important for use after applying mineral spirits to the wood.
3
Use a steam cleaning machine. Get a steam cleaning machine with a hose attachment and add a tiny bit of soap to the bristles at the end. Spray the steam at the stains on the dirty wood and move it back and forth across the stained portions. The dirt should just disappear as you do this.^{[6]
X
Research source}
- Make sure you rinse off any soapy residue with a clean rag when you are done.
- You can rent steam cleaners from most grocery stores or carpet repair stores.
4
Remove old paint or varnish. If your wood door has an old paint finish or other kind of varnish that you want to remove, there are a couple of options. You can sand the old varnish off – a very time consuming task. Or you can use chemical strippers to remove the layers of paint.
- Either option will work well, but remember that chemical stripping must be done in a ventilated area with proper precautions (like wearing a dust mask).
- There are several types of chemical strippers – liquid, brushable pastes, and wash away strippers. In any case, you apply the chemical stripper to the wooden door and let it sit until dry. Then you brush off the remnants (or rinse it off, depending on the kind of stripper you are using).^{[7]
  X
  Research source}
- This method is particularly effective for exterior wood doors.

Part 3

Part 3 of 3:

Preventing Future Damage

1
Let the wood dry thoroughly. When cleaning your wood doors with water or other liquid cleaners, make sure you let the wood dry thoroughly. If the wood isn’t sealed properly, the moisture could cause the wood to warp or stain over time.^{[8]
X
Research source}
- Wipe any excess moisture off with a clean towel. You can also point a box fan at the wood door to help it dry more quickly.
2
Re-stain the door periodically. It’s important for your wood to have a protective seal on it to keep it safe from the elements and to help keep it clean after extended use. Wipe down the door thoroughly before you apply any finishing stain or paint. Choose a stain that is made specifically for indoor wood (unless this in an exterior wood door) and choose a color that suits your décor. You may need to sand down the door or scrape (and then sand) away any existing varnish that is chipping or flaking. Apply the stain or varnish and let it dry completely before you begin using it like normal again.^{[9]
X
Research source}
- If there is a glass window on your door, make sure you tape it off with painter’s tape before you begin staining. Otherwise, you might get the glass dirty or accidentally paint it.
3
Sanitize the fixtures. As you clean your door, be sure to periodically clean the fixtures as well. This means that you should take some time to thoroughly clean all door knobs. Use a regular all-purpose cleaner or a solution of vinegar and water to wipe down and sanitize both sides of the door knobs.^{[10]
X
Research source}
- The fixtures come into contact with the most bacteria, so it’s important to address this when cleaning your wood doors.

Expert Q&A
Did you know you can get expert answers for this article? Unlock expert answers by supporting wikiHow

Question

How can I remove ink from a wooden door?

Michelle Driscoll, MPH
Founder, Mulberry Maids
Michelle Driscoll is the Owner of Mulberry Maids, which is based in Fort Collins, Colorado. With five years of experience, her business specializes in cleaning homes and small offices. She holds a Masters in Public Health from the Colorado School of Public Health. Additionally, Mulberry Maids has an A+ rating from the Better Business Bureau.

Michelle Driscoll, MPH

Founder, Mulberry Maids

Expert Answer

Support wikiHow by unlocking this expert answer.

To remove ink stains from wood, you can create a baking soda paste by adding a couple of drops of water to your baking soda. Spread the paste over the stain and carefully work it into the wood. Baking soda can be abrasive, so do not scrub too vigorously. Moisten a cloth with warm water and scrub the area to work out the stain and to remove the paste. Once the stain is removed, you can rinse the area with water or a small amount of rubbing alcohol to remove any remaining baking soda residue.
Question

How do I remove chalk stains from a door?

Michelle Driscoll, MPH
Founder, Mulberry Maids
Michelle Driscoll is the Owner of Mulberry Maids, which is based in Fort Collins, Colorado. With five years of experience, her business specializes in cleaning homes and small offices. She holds a Masters in Public Health from the Colorado School of Public Health. Additionally, Mulberry Maids has an A+ rating from the Better Business Bureau.

Michelle Driscoll, MPH

Founder, Mulberry Maids

Expert Answer

Support wikiHow by unlocking this expert answer.

You can rub the chalk stain with a wet sponge to remove as much from the surface as possible. If a soapy water solution doesn't remove the chalk, try applying a soft scrub product to the sponge and work out the remaining stains. Finally, rinse the door with a clean cloth and warm water.
Question

I have the old fire doors and they are very grubby where children have opened the doors. What cleaner would you recommend please?

ERROR409

Community Answer

For things like doors and walls, the cleaner that is best suited would be a nonabrasive one, something without harsh chemicals like bleach. Even warm water and lemon juice is a good option.