Shellac is a resin that the female lac bug secretes. When processed, it is turned into dry flakes which are dissolved in industrial alcohol to make liquid shellac.[1] Liquid shellac is used as a food glaze, a wood finish, and a brush-on colorant. It is a high quality varnish for wood, and is prized for being a naturally tough primer and sealant. This article explains how to remove shellac that has been used primarily as a wood finish or sealant.

Note that the Shellac Nails product[2] is something different, and the company that manufactures this product asks that you seek professional removal for it, from a qualified salon. If you need further information about removing nails, see How to remove gel nails and How to remove acrylic nails.

Method 1
Method 1 of 4:

Checking if the Wood Finish is Shellac

  1. 1
    Try to find out how old the wood piece or furniture is. Shellac was a common wood finish before the 1920s; this may be enough to indicate to you that you have a shellac finish. Shellac is also the principal way to make French polish and has been used for this purpose on quality furniture over the past century.[3]
  2. 2
    Test for a shellac finish. Old or new, here is the way to check the finish on the furniture or woodwork:[4]
  3. Advertisement
Method 2
Method 2 of 4:

Deciding Whether the Shellac Needs Removing

  1. 1
    Work to avoid jobs rather than create them when restoring furniture and woodwork! Where the shellac finish appears stained or has dirt embedded in it, try the following first:[8]
    • Sprinkle a mild abrasive compound over the surface. For example, pumice or rotten-stone.
    • Work this in.
    • Rub off with a cloth.
  2. 2
    Buff with a clean rag. If the surface looks good again, you're spared having to remove the shellac.
  3. Advertisement
Method 3
Method 3 of 4:

Applying Denatured Alcohol

For deeper stained, or irregular and missing shellac stain, removing it is probably your best option. Here is how to remove it:[8]

  1. 1
    Use denatured alcohol to remove shellac.[9] Also find a piece of 4/0 steel wool.
  2. 2
    Using a small brush, brush the shellac with the denatured alcohol.
  3. 3
    Allow the denatured alcohol to sit for a few minutes. This will help it to begin naturally stripping off the shellac.[10]
  4. Advertisement
Method 4
Method 4 of 4:

Removing the Shellac

  1. 1
    Put on some rubber gloves to protect your hands.[11]
  2. 2
    Rub the shellac with the steel wool. Remove as much as you can with the steel wool.
    • This part does require some effort and hard rubbing. You may need to take breaks and come back to it, depending on the size of the job. Getting others to help is always a good solution!
  3. 3
    Use a carpet knife for curved, grooved or harder areas. This will be able to reach into narrow spots where the steel wool is just not able to reach.
  4. 4
    Remove the remaining shellac by wiping with a rag. Change the rag frequently, to avoid reapplying the shellac on stripped parts of the surface.
  5. 5
    Remove all soft pieces and any debris before proceeding with adding a new finish. It's also important to sand the surface before applying a new finish.[12]
  6. Advertisement

Community Q&A

  • Question
    Can I sand over shellac on wood that I want to stain and then shellac again?
    Mark Champion
    Mark Champion
    Community Answer
    Yes, look at French polishing for how to apply. It is not as difficult as it may seem. Clean cloths and a ball of cotton wool are the main requirements.
  • Question
    I have a small side table on which my grandmother hand-painted a Pennsylvania Dutch design in the 1950's. It appears she "sealed" it with shellac but the shellac has yellowed over the years and worn off in some areas. How can I remove the shellac without disturbing the hand-painted design?
    Community Answer
    Community Answer
    I don't have experience with this, but if it was mine, I might try sanding lightly, to get the shellac off, and then put several coats of polyurethane on to improve the looks.
  • Question
    How do I remove shellac easily from carved furniture?
    Community Answer
    Community Answer
    Wire wool and methylated (denatured) spirit. It takes time, and you will need gloves if heavily carved. A toothbrush will work, but protect your eyes. Best done outside.
Advertisement

Warnings

  • Despite being natural, some shellac surfaces may be hard to remove. It can be a combination of age, method of application and what other layers have been added. If you are struggling too much, seek professional advice.
    ⧼thumbs_response⧽
  • You may need to reapply the denatured alcohol frequently, as it will dry fast and more will be needed.
    ⧼thumbs_response⧽
  • If you reapply a shellac finish, be aware that it is very easy to scratch and that it is susceptible to damage from both water and alcohol.[1] You will also need to be quite skilled in its application and polishing.
    ⧼thumbs_response⧽
Advertisement

References

  1. 1.01.11.2Albert Jackson and David Day, Complete Woodworker's Manual, p. 288, ISBN 0-00-414005-2
  2. http://www.cnd.com/salon-services/what-is-shellac
  3. https://www.naturalhandyman.com/iip/infpai/shellac.html
  4. https://www.woodmagazine.com/materials-guide/finishes/what-finish-is-that-anyway
  5. William & Shannon Latil. Furniture Refinishing & Home Remodeling Specialists. Expert Interview. 29 October 2021.
  6. http://tlc.howstuffworks.com/home/how-to-strip-wooden-furniture.htm
  7. William & Shannon Latil. Furniture Refinishing & Home Remodeling Specialists. Expert Interview. 29 October 2021.
  8. 8.08.1Time-Life Books, Restoring Antiques, p. 111, (1995), ISBN 0-8094-9929-0
  9. https://www.bobvila.com/articles/how-to-remove-varnish/

About This Article

William & Shannon Latil
Co-authored by:
Furniture Refinishing & Home Remodeling Specialists
This article was co-authored by William & Shannon Latil. William & Shannon Latil are Furniture Refinishing & Home Remodeling Specialists and the Founders of Furniture Refinishing Services based in Houston, Texas. With over 30 years of experience, William and Shannon specialize in repairing and restoring wood furniture, refinishing kitchen cabinets, remodeling kitchens, and building live-edge wooden tables. William and Shannon have won Awards for Excellence from the Better Business Bureau and the Houston Chronicle Best Small Business Award. Their work has also been featured in Houston Press Magazine - Kitchen Design. Additionally, the Furniture Refinishing Services team has conducted major refinishing work on venues such as NRG Stadium and Minute Maid Park. This article has been viewed 153,976 times.
4 votes - 75%
Co-authors: 14
Updated: July 6, 2022
Views: 153,976
Article SummaryX

To remove shellac, start by brushing denatured alcohol onto the wood surface and leaving it for a few minutes to start the stripping process. Then, put on rubber gloves to protect your hands, and rub the shellac with steel wool to remove as much of it as possible. Finally, wipe off any remaining shellac with rags, changing them frequently to avoid reapplying the finish to the parts you’ve already stripped. To learn how to tell whether you should remove the shellac from your furniture, scroll down!

Did this summary help you?
Advertisement