How to Make Apple Wine

You don’t need to own a winery or be a professional winemaker to make apple wine. It can be made at home for an easy, fun, and cost-friendly DIY project! All you really need are apples, yeast, water, and a fermenter. Drink it yourself or share with friends! Once you ferment, rack, and condition the wine, it’s ready for consumption.

Ingredients

  • 4 kilograms (8.8 lb) of apples
  • 4.5 litres (1.2 US gal) of Water
  • 900 grams (2.0 lb) of Sugar
  • 2.5 grams (½ tsp) of Acid Blend
  • 2.8 grams (1 tsp) of Yeast Nutrient
  • 2 grams (0.5 tsp) of Pectic Enzyme
  • 0.7 grams (¼ tsp) of Wine Tannin
  • 1 Campden Tablet
  • 1 Sachet of Yeast
Part 1
Part 1 of 3:

Picking and Cubing Your Apples

  1. Image titled Make Apple Wine Step 1
    1
    Purchase or pick 4 kilograms (8.8 lb) of apples. Don’t get just one type of apple! A medley of different apple variants creates a wine with blended tastes, textures, and smells. A mix of aromatic and acidic apples are commonly used to add depth to the wine.[1]
    • Some aromatic apples to consider are McIntosh, Golden, and Red Delicious. Popular acidic apples are Jonathan, Northern Spy, Winesap, Baldwin, and Granny Smith.[2]
    • Only use ripe apples. Unripe apples have a low sugar and high starch content which can interfere with the clarification process. Overly ripe apples are hard to clarify and process.[3]
  2. Image titled Make Apple Wine Step 2
    2
    Wash the apples. Run them under cold water until the water running off of them is completely clear. The water helps remove dirt and chemical residue. Once they are washed, pat them dry.[4]
    Advertisement
  3. Image titled Make Apple Wine Step 3
    3
    Slice the apples into cubes. Use a large, sharp kitchen knife. Start by vertically cutting the apple into sixths, removing the core from the center. Then, continue to slice the apple into smaller sections, until you are left will small cubes.[5]
    • Leave the apple skin intact! Removing it can impact the fermenting process.
    • You can make the cubes any size you want. A common size is 0.5 inches (1.3 cm)
    4. Advertisement
Part 2
Part 2 of 3:

Fermenting the Wine

  1. Image titled Make Apple Wine Step 4
    1
    Boil 2.25 litres (0.59 US gal) of water and 900 grams (2.0 lb) of sugar. Use a pot that is big enough to hold 4.5 litres (1.2 US gal) of water and 4 kilograms (8.8 lb). Turn the heat on high to bring the water to a boil. Once the water starts to boil, let it simmer for a few minutes.
  2. Image titled Make Apple Wine Step 5
    2
    Add the apples and boiling water to your fermenter. First, put the chopped apples in a fine straining bag. Tie it tightly to help block extra sediment from getting in your wine. Place the bag at the bottom of the fermenter. Next, pour the 2.25 litres (0.59 US gal) of boiling water into the fermenter.
    • Be careful with the boiling water! Use heat protection to make sure not to burn yourself.
    • For a cheaper option, use a plastic bucket fermenter.
  3. Image titled Make Apple Wine Step 6
    3
    Pour 2.25 litres (0.59 US gal) of cold water into the fermenter. Use cold water to bring the boiling water down to a lukewarm temperature. Be careful when pouring so the boiling water doesn’t splash up on you.
  4. Image titled Make Apple Wine Step 7
    4
    Stir in the tannin, yeast nutrient, and acid blend to the fermenter. Use 0.7 grams (¼ tsp) of tannin, 2.8 grams (1 tsp) of yeast nutrient, and 2.5 grams (½ tsp) of acid blend.[6] . Once you’ve added the ingredients, take a large cooking spoon and stir thoroughly. Then, let the fermenter and its contents sit and cool for at least 2 hours.
    • If you only used aromatic apples, you can add up to 5 grams (1 tsp) of acid blend.
    • Leave the fermenter lid open. Doing so will speed up the cooling process.
  5. Image titled Make Apple Wine Step 8
    5
    Add a crushed Campden tablet to the fermenter and wait 12 hours. Use a large cooking spoon to mix in the crushed Campden tablet with the must. Once you’ve finished stirring, cover the fermenter with its lid, letting it sit for at least 12 hours.
  6. Image titled Make Apple Wine Step 9
    6
    Add 2 grams (0.5 tsp) of pectic enzyme and wait 24 hours.[7] After adding the enzyme to the fermenter and stirring the must completely, leave the fermenter covered to sit for 24 hours.
  7. Image titled Make Apple Wine Step 10
    7
    Sprinkle in a sachet of yeast to the fermenter and wait 24 hours. After you add the yeast, close the fermenter to shield the must from the air. Let the fermenter sit closed for 24 hours. During this time, the yeast will start to ferment the wine by converting the apples’ sugars into alcohol.
    • Don’t stir the yeast.
    • A common yeast sachet recommendation is Lalvin EC-1118.
  8. Image titled Make Apple Wine Step 11
    8
    Stir the fermenter's contents daily for a week. Take a large cooking spoon and stir everything in the fermenter. Don’t forget to stir the apples at the bottom! Stirring everything daily helps break down the apples.
  9. Image titled Make Apple Wine Step 12
    9
    Remove the bag of apples from the fermenter. Use tongs or put on gloves to take out the apples. Once removed, let the bag of apples drip dry over the opening of the fermenter. Then, let the remaining contents settle in the fermenter for 24 hours.
    • Tempting as it is, don’t squeeze the bag of apples over the fermenter!
    10. Advertisement
Part 3
Part 3 of 3:

Racking the Wine

  1. Image titled Make Apple Wine Step 13
    1
    Siphon the wine into an air-tight demijohn. Fill the siphon tube with water and place one end halfway down into the fermenter. Place the other end of the siphon into the demijohn and release the flow of wine. This process is called racking. When the wine reaches the yeast layer at the bottom of the fermenter, remove the siphon.[8]
    • Sanitize your siphon before using it!
    • Be careful not to pour out the water in the siphon tube! Keep the ends elevated and put one of your fingers on the end.
    • To prevent air bubbles, pinch the tube.
    • Make sure to place the demijohn at a lower height than the fermenter.
  2. Image titled Make Apple Wine Step 14
    2
    Rerack the wine by repeating the siphoning process. You can siphon the wine into another demijohn or back to the fermenter to siphon it back to the original demijohn. This should be done every few months to aid clearing.
  3. Image titled Make Apple Wine Step 15
    3
    Let the wine condition for at least 4 months. To condition, it, just let the wine sit and age in the demijohn. The longer you condition the wine, the softer it will taste.
  4. Image titled Make Apple Wine Step 16
    4
    Siphon the wine into bottles. Place the sanitized wine bottles below the fermenter or demijohn. Once bottled, the wine is ready for you to drink or gift!
    5. Advertisement

Things You’ll Need

  • Large Pot
  • Large knife
  • Fine straining bag
  • Fermenting Bucket
  • Syphon
  • Demijohn
  • Airlock and bung

Warnings

Advertisement

You Might Also Like

How to
Open a Wine Bottle Without a Corkscrew
How to
Use a Corkscrew
Make Homemade WineHow to Make Wine from the Comfort of Home
Drink Wine
How to
Drink Wine
Make Rice WineSimple 2-Ingredient Recipe for Homemade Chinese Rice Wine
How to
Open a Bottle of Wine
Remove a Broken Cork5 Simple Tricks to Rescue Wine and Whiskey from Broken Corks
How to
Hold a Wine Glass
Drink Red Wine
How to
Drink Red Wine
How to
Open a Champagne Bottle
How to
Recork Champagne
Make an Airlock for Wine and Beer Production
How to
Make an Airlock for Wine and Beer Production
Drink Wine for Health
How to
Drink Wine for Health
Make Pruno
How to
Make Pruno
Advertisement

References

  1. ↑ https://www.extension.iastate.edu/wine/apple-wine
  2. ↑ https://www.extension.iastate.edu/wine/apple-wine
  3. ↑ https://www.extension.iastate.edu/wine/apple-wine
  4. ↑ https://www.extension.iastate.edu/wine/apple-wine
  5. ↑ https://www.youtube.com/watch?v=QGURNgLlUa4
  6. ↑ http://www.piwine.com/media/home-wine-making-basics/weights_and_measures.pdf
  7. ↑ http://www.brsquared.org/wine/CalcInfo/weights.htm
  8. ↑ https://www.youtube.com/watch?v=N6wnVFsGdv0

About This Article

wikiHow Staff
Co-authored by:
wikiHow Staff
wikiHow Staff Writer
This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow's Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards. This article has been viewed 31,846 times.
19 votes - 90%
Co-authors: 11
Updated: January 2, 2021
Views: 31,846
Categories: Wine
Article SummaryX

To make apple wine, start by gathering 9 pounds of ripe apples, like McIntosh, Golden, and Red Delicious. Run your apples under cold water until they’re clean, then pat them dry. Use a large, sharp knife to core and cube the apples, but leave the skin intact for the fermenting process. Once your apples are prepped, boil water and sugar. Then, put your chopped apples in a fine straining bag, place them in the bottom of your fermenter, and pour the boiling sugar water over them. Add cold water to the mixture as well as tannin, yeast nutrient, acid blend, and 1 crushed Campden tablet. After 12 hours, add pectic enzyme, then wait 24 hours. Next, sprinkle in some yeast, wait another 24 hours, and stir the mixture. For the next week, stir your wine daily, then remove the bag of apples and siphon the wine into an air-tight demijohn. To learn how to condition your wine, keep reading!

Did this summary help you?
Advertisement