How to Cool Down the Water in a Fish Tank

Find a place in your home away from windows and direct sunlight. Sometimes something as simple as where your tank is located can lower the water temperature by a few degrees. This is accomplished by selecting a place with better ambient light and airflow. Ideally, this space should be in a room with a ceiling fan running, a fan to blow across the surface of the water, or underneath an air vent so fresh air will blow across the tank.

• Direct sunlight cannot replace a heater and can cause algae blooms.

Turn off and remove all filters, lights, and electrical equipment. If you had any heaters in the tank, let them cool before removing them. This is to prevent the heaters from cracking.

• You can place the filter cartridge in treated water in order to avoid harming the beneficial bacteria there.

Get a food grade bucket and fill it partially with aquarium/treated water. You may also add a de-stress solution for your fish to the bucket.

Remove the decorations from your tank and set them aside. Do not uproot live plants if you have them in your aquarium!

Remove your fish from the tank and add them to the bucket of water for transport. Use a cup to capture smaller or more delicate fish as a net can harm them. Be very gentle in this process.

Remove as much water from the tank as possible. You can save this water to put back into the tank after moving (in fact, this is ideal, as adding in large amounts of new water later can shock your fish).

Relocate your tank. Move slowly and employ help, because tanks can be surprisingly heavy. Never lift your tank by the border or edge, as that can weaken the glue holding the glass together.

Re-add your filter, electrical equipment, decorations, reserved water, and fish in that order. Top the tank off with clean dechlorinated water. If you had a heater in the tank, don't put it back in until the weather cools down.

• You might want to let the water settle before adding fish.

Look at small changes you can make. If your tank already is in an ideal location or cannot be moved, airflow and light may still be adjusted to help your tank cool down.

Consider the following if your tank has live plants and a light.

• If your tank has live plants and a light, consider leaving the light on for fewer hours per day during hot times of the year. All lights generate some heat, so less light may help the water temperature. If the lights are inside the tank's lid, remove the lid if possible while the lights are off in order to improve airflow.
• If your tank does not have live plants, it does not need a light. Keep the aquarium lights turned off. Also keep the lid off the tank if possible to improve airflow and further cool the water.

Find out if your light is ideal. Some lights act like heat lamps, putting out both heat and light. Heat lamps are not an ideal way to heat your tank, and you want your light to put out as much light as possible without heating your tank.

• LEDs are a popular and good choice. Avoid fluorescent or halide lights, as they grow hot quickly and can even pop because of the heat and moisture.

Turn on any fans in the room and have them blow across the water's surface. If you do not have any fans in the room, a portable fan may be used to create a steady breeze across the water's surface.

If your aquarium has a heater, be sure to turn it off! Let the heater cool down before removing it from the water.

• You can also buy heaters that automatically turn themselves off at a certain temperature.

Use this method with care. Ice can be a good way to temporarily help your fish beat the heat. Be careful, though--it's possible to cool the water down too quickly, which can make fish sick.

Freeze one ounce of aquarium water per two gallons of tank space. Try a sealed water bottle, reusable ice cubes, or even an old plastic food container. They all work well for this. Try to freeze the ice in one chunk as much as possible.

Move your thermometer as far away from the ice as possible. That way, you'll be able to get the most accurate reading for the overall temperature of the water.

Place the frozen aquarium water into your fish tank.

Check the temperature after 30 minutes.

Assess the temperature changes. If the temperature has fallen by less than two degrees Fahrenheit, you are doing fine. Small changes in temperature are ideal! Don't add more ice until at least half an hour after all of the old ice has melted.

Know how much change is too much. If the temperature has fallen by two or more degrees Fahrenheit, it is going too fast. Remove any unmelted ice and wait half an hour or more before checking the temperature again. Use less ice next time.

Check periodically. Once all of the ice has melted check the temperature again. If it is still too warm, add more ice and repeat the process.

Consider whether you need a chiller. If a tank is always too warm or has saltwater fish or corals in it, ice will not work and may be too risky due to the uneven temperature changes. An aquarium chiller provides a more constant temperature with less upkeep than the ice method. It isn't cheap, but it is permanent.

Find your aquarium's size. You will need a chiller rated for your current tank size or bigger. If your tank is near the upper end of a chiller's effective range, you will want to buy the next biggest size. It is better to use a bigger chiller on a lower setting than to find out your chiller was too small and be forced to buy a second one.

Decide if you want a drop-in chiller or an inline chiller.

• Drop-in chillers are simply dropped into the tank, commonly right in the sump or directly in the outflow water current so cool water will be circulated. It's easy to install, but also easy to get wrong. Some people also warn against putting a chiller in your filter line as it can kill beneficial bacteria colonies leaving fish vulnerable.
• An inline chiller requires more setup and often is more expensive, but is less noticeable than a chiller inside of a tank with less risk to your bacterial colonies. The chiller sits outside of the tank and has lines that run into the tank. It sucks up warm water and expels cooler water via these lines.

Search online for reviews about chillers of your desired type in that size range. Saltwater aquarium forums and discussion sites are a good place to read about what others have experienced with their own chillers and to find recommended models and brands.

Purchase and install your chiller according to manufacturer instructions. Follow the instructions exactly, as saltwater tanks (what chillers are usually used for) are sensitive to changes.