Accidents happen. Your dog's playful nature and curiosity may lead to cuts, scrapes, and punctures at some point in his life. Cleaning the wound properly at home will help him heal and may buy you some time if you can't get him to the vet immediately. Proper wound cleaning will prevent infection and help you and the vet tell how bad your pet's injury really is.

Part 1
Part 1 of 3:

Stopping any Bleeding

  1. 1
    Calm the dog down. Once you notice that your dog is injured, get control of him and calm him down if he's over-excited. Soothe your dog by petting him gently and speaking to him in a low, calm voice. Make sure to stay calm yourself, even if you're worried. Your dog can read your body language and knows your voice intonations very well. He'll pick up on your behavior and follow your lead.
  2. 2
    Muzzle the dog if necessary. You need to keep your own safety in mind when handling an injured animal. Even if your dog is normally sweet and loving, he may lash out to protect himself from further pain. If you're at all worried for your safety — if your dog starts growling or snapping at you, or if the dog has a previous history of biting when agitated — muzzle your dog.
    • If you don't have a muzzle, wrap a leash or light rope around your dog’s muzzle.[1]
    • If he raises a big fuss, stop and get your pet to the veterinarian as safely as possible.
    • Protect yourself by putting a blanket or towel over him before moving him to the veterinary hospital.
    Advertisement
  3. 3
    Address any bleeding you see. While cleanliness is important, it's actually more vital to stop profuse bleeding as soon as possible. If blood seems to be pulsing out of the wound, the dog likely has an arterial injury that could be very dangerous; pulsing blood should be taken very seriously.
    • Apply direct pressure to the wound using a clean, absorbent material like a towel, washcloth, shirt, gauze, or even a feminine hygiene pad.
    • Keep pressure on the wound for 3-5 minutes before checking to see if the bleeding has stopped. If you keep taking off the pressure, you disturb the blood clot trying to form, and delay the process.
  4. 4
    Apply a tourniquet only if needed and under expert instruction. A tourniquet should be your last resort to control bleeding. Applying one incorrectly can lead to complications that might result in tissue death. Your pet might need amputation if you cut off circulation. If you don't have training in applying a tourniquet to a dog, call your vet for expert instruction to go along with this general guideline.
    • Place a clean towel or pad around the limb (but not around the neck, chest, or abdomen).
    • Use a belt or leash to hold it in place. It should be placed above the wound, toward the body.
    • Leave it on for no more than 5 to 10 minutes before releasing the pressure to avoid permanent injury to the limb.
    • Use enough pressure to slow down or stop the bleeding, but avoid crushing the muscle and soft tissue.
    • Applying the tourniquet should not be painful to your pet.
  5. Advertisement
Part 2
Part 2 of 3:

Cleaning the Wound

  1. 1
    Clip away hair from around the wound with electric clippers. Once you've gotten the bleeding under control, you can start the cleaning process. If your dog has long hair, you may need to trim it away, but do so only if you can do it safely. If you don’t have clippers, carefully use blunt scissors to shorten the hair, but don't try to get down to the skin with scissors, as this increases the chance of further injury. Clearing away the dog's fur will let you a good look at the wound, and will keep hair from trapping dirt or irritating the exposed flesh.
  2. 2
    Flush out the wound with warm salt water. Add 2 tsp of sea salt to 1 cup warm tap water, and stir until it dissolves. Fill a turkey baster or syringe (without the needle) with the mixture, then squirt it gently into the wound until it's clean. The tissue should be clear and glistening before you stop flushing the wound.[2] [3]
    • If you don't have a baster or syringe, pour the water directly over the wound.
    • If the wound is on the paw, you can soak the foot in a bowl, baking dish or small bucket for three to five minutes. Have a towel handy to dry the paw.
  3. 3
    Disinfect the wound. Dilute Betadine (Povidine Iodine) or Nolvasan (Chlorhexidine) in warm water. Use this solution as a final rinse or soak. You can also use these solutions instead of saline when you're first cleaning the wound.
  4. 4
    Dry the wound. A sterile gauze is ideal, but any clean absorbent material will be fine. Don't rub or scrub at the wound. Instead, pat it gently to avoid causing more pain or injury.
  5. 5
    Apply an antibiotic cream or spray safe for humans. Be aware that a spray might scare your dog, and may even sting for a little bit. Don't use creams and ointments if you have another option, as they might attract dirt to the wound. Furthermore, your dog will likely try to lick it off, so use those products only if you can prevent the dog from bothering the area. You can either wrap the treated area with protective gauze or use an Elizabethan collar.
    • Be careful that you don't spray anything into the dog's eyes.
    • Don't use ointments with steroids like hydrocortisone or betamethasone that may interfere with the wound's healing process. Use only antibiotic ointments.
    • Do not use antifungal creams (ketoconazole, clotrimazole) unless instructed by your veterinarian.
    • If you have any questions, call your pharmacist or vet before applying the product.
  6. 6
    Check the wound daily. If you see any signs of infection, take your dog to the vet immediately. Signs that suggest infection include a bad smell or yellow, green, or gray discharge.
  7. Advertisement
Part 3
Part 3 of 3:

Seeking Professional Veterinary Help

  1. 1
    Don’t wait to see a vet for eye injuries. Any cuts or wounds to the eye could potentially result in permanent damage to your pet’s sight. To increase the odds of a healthy recovery, take him to the vet immediately for evaluation and treatment.
  2. 2
    Take the dog to the vet for stitches if the wound is more than superficial. If the cut looks severe, like it won't heal on its own, you need to have a vet look at it. All wounds that penetrate through the skin to the muscle, tendon, or fat need professional evaluation. After assessing the wound, the vet might suggest giving the dog stitches to promote healing.
  3. 3
    Seek veterinary help for all bite wounds. Bites usually involve crushing damage to the dog's tissue. This can complicate recovery, so bite wounds need flushing and drains, which both need to be done under anesthesia by your vet. Animals' mouths are full of bacteria, so there's a risk of infection even if the bite doesn't seem severe.[4]
  4. 4
    Have the vet drain or debride the wound if necessary. If the wound fills up with fluid instead of healing healthily, ask the vet if he or she recommends draining it. Debridement is the removal of damaged or infected tissue from around the wound. Both of these procedures will require the vet to put your dog under anesthesia.
  5. 5
    Ask the vet about systemic antibiotics. These medications can treat or prevent infection, which slows healing. Your veterinarian should assess the wound, determine if there are signs of infection, and discuss antibiotics with you if necessary.
  6. Advertisement

Expert Q&A

  • Question
    Is saline good to use on a dog wound?Is it a good idea to use saline solution to clean a wound on a dog?
    Pippa Elliott, MRCVS Dr. Elliott, BVMS, MRCVS is a veterinarian with over 30 years of experience in veterinary surgery and companion animal practice. She graduated from the University of Glasgow in 1987 with a degree in veterinary medicine and surgery. She has worked at the same animal clinic in her hometown for over 20 years.
    Pippa Elliott, MRCVS
    Veterinarian
    Expert Answer
    Yes, saline has natural antibacterial properties and is a useful way to flush away contamination from the surface of a wound. It is also relatively sympathetic to exposed tissue and less likely to kill tissue than some other disinfectants, therefore it is a good go-to disinfectant if you're not sure what to do.
  • Question
    My dog cut her head whilst scratching and keeps reopening the wound. How do I keep her from re-opening the wound?
    Pippa Elliott, MRCVS Dr. Elliott, BVMS, MRCVS is a veterinarian with over 30 years of experience in veterinary surgery and companion animal practice. She graduated from the University of Glasgow in 1987 with a degree in veterinary medicine and surgery. She has worked at the same animal clinic in her hometown for over 20 years.
    Pippa Elliott, MRCVS
    Veterinarian
    Expert Answer
    If she is rubbing the cut then consider a cone, so that she can't get to the area. If this isn't practical then cut her claws and/or bandage the paw she scratches with so that it does less damage. In addition, check for anything that made her itchy in the first instance, such as fleas or ear mites. By treating and removing the reason for the itch, she's more likely to leave the head alone.
Advertisement

Warnings

Advertisement

About This Article

Pippa Elliott, MRCVS
Co-authored by:
Veterinarian
This article was co-authored by Pippa Elliott, MRCVS. Dr. Elliott, BVMS, MRCVS is a veterinarian with over 30 years of experience in veterinary surgery and companion animal practice. She graduated from the University of Glasgow in 1987 with a degree in veterinary medicine and surgery. She has worked at the same animal clinic in her hometown for over 20 years. This article has been viewed 555,771 times.
38 votes - 92%
Co-authors: 13
Updated: May 6, 2021
Views: 555,771
Article SummaryX

To clean a dog wound, first calm your dog down by petting it and speaking to it in a low, calm voice so it doesn’t resist your help. If it’s still bleeding, apply pressure to the wound using a clean towel, washcloth, or old t-shirt. When the wound has stopped bleeding, trim your dog’s hair with clippers or scissors to stop hair trapping dirt inside the wound. Then, use a syringe or turkey baster to flush out the wound with warm salt water. If you don’t have either of them, just pour the water directly over the wound. Once you’ve cleaned the wound, apply a disinfectant like dilute Betadine or Nolvasan, which will kill any bacteria on your dog’s skin. If you notice signs of infection, like a bad smell or green, yellow, or gray discharge coming from the wound, take your dog to the vet for treatment. For more tips from our Veterinary co-author, including how to use a torniquet to stop your dog's bleeding, read on!

Did this summary help you?
Advertisement