How to Adjust a Recliner Chair

An uncomfortable recliner chair can often be fixed by making a few adjustments. Changing the pressure required to recline the back of the chair can help make your recliner just right for you. Adjusting the position of the chair when upright can also help personalize your chair for the best sitting experience.

Method 1
Method 1 of 3:

Adjusting Recliner Tension

  1. Image titled Adjust a Recliner Chair Step 1
    1
    Test your recliner's tension. "Recliner tension" refers to how easily the backrest of the recliner leans backward. Sit in the recliner and lean back against the backrest. [1]
    • If it's too difficult to lean back, you'll need to decrease the recliner tension. It can also be a good idea to decrease the tension if you have a petite build since reclining the chair will then require less strength.
    • If the recliner leans too far back for comfort, or if it leans back too easily, you may need to increase the recliner tension. This is usually a good idea for heavier individuals, taller individuals, and people needing firmer back support.
  2. Image titled Adjust a Recliner Chair Step 2
    2
    Tilt the recliner forward. Make sure the back is in the upright position and the footrest is closed, and carefully tilt the entire recliner forward, to expose the underside of the chair.
    • Rest the recliner on the front of the armrests and the top of its back. You may need both hands to adjust the tension, and the process will be difficult to complete if you attempt to hold the chair the entire time.
    Advertisement
  3. Image titled Adjust a Recliner Chair Step 3
    3
    Look for an adjustment mechanism. Recliners with adjustable recliner tension should have a pair of thumb wheels or wing nuts beneath the seat. If no mechanism is present, you may not be able to adjust the tension.[2]
    • Look for a thumb wheel or wing nut on the right and left of the underside of the chair. Each one should be positioned at the end of a bolt, and tension springs should be connected to the same bolt from the other side.
    • The exact placement of the mechanism may vary by manufacturer and model, but in most cases, the mechanism can be found beneath the seat and toward the back of the recliner. In some instances, the mechanism might be positioned more toward the bottom center.
  4. Image titled Adjust a Recliner Chair Step 4
    4
    Rotate the mechanism. Turn the thumb wheels or wing nuts clockwise to increase the reclining tension. Turn them counterclockwise to decrease the tension.
    • Both wing nuts and thumb wheels should be adjusted in the same way when you're dealing with recliner tension, so the basic instructions should remain the same.
    • Try turning the mechanism with your fingers. If it feels too tight, you may need to use sturdy pliers instead.
    • Work in small increments. Only turn each wheel or nut by a quarter turn each time, and repeat each adjustment on both sides of the chair to keep the tension even throughout.
  5. Image titled Adjust a Recliner Chair Step 5
    5
    Test the adjustment. Return the recliner to its upright position. Sit in the chair and check the recliner tension by extending the leg rest out and leaning back in the chair.
    • If the recliner tension feels comfortable enough, you can end the process here and relax in your newly adjusted chair.
    • If the recliner tension still feels too loose or too stiff, further adjustments will be needed.
  6. Image titled Adjust a Recliner Chair Step 6
    6
    Repeat as needed. Continue adjusting the recliner’s tension as needed by following the same steps. Close the footrest, tilt the chair forward, and rotate the adjustment mechanism in the proper direction.
    • Only adjust the tension by one-quarter turns each time. It might seem tempting to make larger adjustments, but doing so will usually cause you to overcompensate and may adjust the tension too far in the other direction.
    • Never loosen or tighten the adjustment mechanism all the way. Doing so can cause permanent damage to the tension spring.
    • The tension spring should be unable to move on the bolt after your adjustments. If it does move around, it is too loose, and you should turn the mechanism at least one clockwise half-turn.
    • Similarly, if the spring becomes completely compressed and too tight, turn the mechanism at least one counterclockwise half-turn to remedy the problem.
    7. Advertisement
Method 2
Method 2 of 3:

Replacing Tension Springs

  1. Image titled Adjust a Recliner Chair Step 7
    1
    Turn your recliner over. With the footrest down and the back in an upright position, gently flip the recliner forward to reveal the frame underneath the seat of the recliner.
  2. Image titled Adjust a Recliner Chair Step 8
    2
    Identify the attachment points for the tension springs. Look on either side of the recliner for clips or tabs where springs attach. If the springs are still present, you just need to locate where they attach to the frame on either end of the spring.
  3. Image titled Adjust a Recliner Chair Step 9
    3
    Remove the old, damaged springs with pliers. Firmly grasp one end of the spring and disconnect the spring from the frame by pulling and twisting it loose with pliers.
    • Be careful when removing the spring as it will be under high tension.
    • Wear safety goggles to prevent eye damage from potential flying metal.
  4. Image titled Adjust a Recliner Chair Step 10
    4
    Purchase heavy duty replacement springs. The best springs to use in a recliner would be manufacturer replacement parts made for your recliner model.
    • Contact a local recliner retailer to inquire if they provide replacement parts.
    • Search online for recliner repair or parts dealers.
    • If exact matches can’t be found, ask a retailer which springs would be compatible with your recliner model.
  5. Image titled Adjust a Recliner Chair Step 11
    5
    Stretch the springs. Place a screwdriver through the loop on each end of the spring. Pull the spring apart gently. Slide a nickel in between each coil of the spring to separate the coils. You can also use washers in place of nickels.[3]
  6. Image titled Adjust a Recliner Chair Step 12
    6
    Install the springs. Connect one end of the spring to the attachment point of the frame. Using a pair of pliers, pull the spring to attach to the frame at the other end.
    • Be extremely careful when working with springs under tension. Locking adjustable pliers are good to ensure you have a solid grip on the spring.
  7. Image titled Adjust a Recliner Chair Step 13
    7
    Remove the nickels separating the coils. Gently pull the nickels from between each coil with a pair of pliers. Once the nickels are removed the spring will return to its normal tension.
    • Ensure the spring is securely attached at both ends prior to removing the nickels.
  8. Image titled Adjust a Recliner Chair Step 14
    8
    Return the recliner to the upright position to test the springs. Flip the recliner back over and sit in it. Lean against the backrest to test the tension of the springs. There should be some resistance when you lean the backrest back. If the resistance isn’t right, you may need to try another set of springs.
    9. Advertisement
Method 3
Method 3 of 3:

Changing Recliner Pitch

  1. Image titled Adjust a Recliner Chair Step 15
    1
    Sit in the recliner in the upright position. Place your back against the backrest without reclining. Evaluate your recliner’s pitch for optimum comfort. "Recliner pitch" refers to the height of the chair front when the recliner is in its closed, upward position. You can usually adjust the pitch by altering the appropriate bolts at the bottom of the chair.
    • If the recliner pitch is too high, your feet won't be able to touch the floor when you sit down. Adjust the pitch downward.
    • If the recliner pitch is too low, your knees will bend upward and above the seat when you're sitting down, which may lead to discomfort and an unhealthy posture. Consider adjusting the pitch upward.
  2. Image titled Adjust a Recliner Chair Step 16
    2
    Tilt the recliner forward. With the back in an upright position and the leg rest closed, lean the entire recliner forward to expose the underside of the chair.
    • Allow the recliner to rest on the top of its back and the tips of its armrests when you lean it forward. Doing so frees up both hands, making it easier to make the necessary adjustments to your chair.
  3. Image titled Adjust a Recliner Chair Step 17
    3
    Locate the cam bolts. You'll need to adjust the bolts holding the cam, or full base mechanism, securely in place. These bolts are typically located toward the center bottom of the chair.[4]
    • Note that these bolts are not the same as your recliner tension bolts. Your recliner tension bolts feed into the recliner spring, but the cam bolts are located in the metal frame of your base mechanism.
    • Typically, there should be a total of four bolts holding the frame in place. Look for two bolts at the back of the frame (one on either side of the chair) and two bolts at the front of the frame (one on either side of the chair).
  4. Image titled Adjust a Recliner Chair Step 18
    4
    Loosen the back bolts. Use an appropriately sized wrench to loosen the cam bolts on either side of the bottom mechanism.
    • Make the bolts loose enough for you to wiggle the chair around, but do not loosen them completely. Do not remove the bolts or allow them to drop out of the frame.
    • Note that cordless power ratchets might be easier to use than mechanical wrenches for this task. Either option should be acceptable, though.
  5. Image titled Adjust a Recliner Chair Step 19
    5
    Remove the front bolts. Using a wrench or cordless power ratchet, loosen and completely remove the two cam bolts at the front of the bottom mechanism.
    • Unlike the back bolts, the front bolts must be completely removed. Keep them nearby and in a safe place, however, since you'll be needing them again soon.
  6. Image titled Adjust a Recliner Chair Step 20
    6
    Adjust the frame. Move the front of the frame up or down to adjust its position. Doing so will also adjust the recliner pitch.
    • Slide the frame up and back to bring the front of the chair closer to the ground, to increase its front pitch. Push the frame down and forward to draw the front of the chair further away from the ground, thereby increasing its rear pitch.
    • Look at the slot at the front of the cam. This area is where the front cam bolts fit. For most recliners, the slot has grooves that allow for five different settings, and two sets of holes for the bolts to fit through. In total, you can usually alter the pitch to as many as nine different settings.
    • Even small adjustments can make a big difference in the pitch of the recliner once you test it out, so it's best to work in small increments.
  7. Image titled Adjust a Recliner Chair Step 21
    7
    Return the front bolts. Once you've positioned the cam as desired, insert the front bolts back into the bottom frame.
    • Loosely twist the bolts into the correct holes using your fingers. Check the positioning before you continue. Both bolts should be fitted into the same position on either side of the chair.
    • Once the bolts are properly positioned, use a wrench or power ratchet to tighten them securely in place.
  8. Image titled Adjust a Recliner Chair Step 22
    8
    Tighten the back bolts. Using a wrench or cordless power ratchet, completely tighten the back bolts of the recliner.
    • Try to wiggle the bottom mechanism or frame after tightening all four bolts. It should remain firm and stationary. If not, check and re-tighten the bolts as needed.
  9. Image titled Adjust a Recliner Chair Step 23
    9
    Test the pitch. Return the chair to its upright position and sit down. Your feet should be able to touch the floor and your knees should be bent at an approximate right angle.
    • To maintain proper posture, your body should be positioned in right angles at the knees, hips, and elbows. You should also have approximately 2 to 3 inches (5 to 7.6 cm) of space in between the edge of the chair and the back of your calf.
    • If the pitch is correct, no further adjustments are needed. You can stop here and relax in your newly adjusted chair.
    • If the pitch is still incorrect, continue adjusting it as needed to fix the problem. Repeat the same sequence of steps to make these additional adjustments.
    10. Advertisement

Community Q&A

  • Question
    Can I bring my legs up higher than my heart?
    Community Answer
    Community Answer
    You may have trouble finding a chair that would lift your feet that high, but you could pile cushions or pillows under your feet to raise your legs above your heart.
  • Question
    How do I stop it from squeaking?
    Community Answer
    Community Answer
    Try some WD-40.
  • Question
    How do I adjust a recliner that is not sitting level from side to side (is slightly tilted)?
    Community Answer
    Community Answer
    Put a thin piece of wood under some of the legs until it is level. Folded paper works, too.
Advertisement

You Might Also Like

Fix a Sinking Desk Chair
How to
Fix a Sinking Desk Chair
Fix a Squeaky Desk Chair
How to
Fix a Squeaky Desk Chair
Clean an Office Chair
How to
Clean an Office Chair
Replace Office Chair Casters
How to
Replace Office Chair Casters
Cane a Chair
How to
Cane a Chair
Clean the Wheels of a Rolling Desk ChairHow to Clean the Inside & Outside of Office Chair Wheels
Close Tommy Bahama Chairs
How to
Close Tommy Bahama Chairs
Clean Leather Chairs
How to
Clean Leather Chairs
Advertisement

References

  1. ↑ http://www.lazyboyreclinersonline.com/how-to-adjust-lazyboy-recliner-tension/
  2. ↑ http://www.reclinerrepairguy.com/maintenance_tips.htm
  3. ↑ http://howtomendit.com/answers.php?id=139622
  4. ↑ https://www.youtube.com/watch?v=uIucWGVGLdQ

About This Article

wikiHow Staff
Co-authored by:
wikiHow Staff
wikiHow Staff Writer
This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow's Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards. This article has been viewed 379,090 times.
341 votes - 54%
Co-authors: 11
Updated: January 29, 2023
Views: 379,090
Categories: Chairs and Seating | Furniture Fixes
Article SummaryX

To adjust a recliner chair, you can use the adjustment mechanism to increase or decrease the reclining tension. First, test the reclining tension by leaning back in the chair. If it's too easy or hard to lean back, you'll need to adjust the tension. To do this, make sure the back is upright and the footrest is closed, and tilt the chair forward onto its armrests. Then, look for an adjustment mechanism, like a thumb wheel or wing nut, on the underside of the chair. Once you’ve found the mechanism, turn it clockwise to increase the reclining tension or counterclockwise to decrease it. When you’ve adjusted the tension, sit the chair upright and test it. If the tension’s still too strong or weak, repeat the process until you’re happy with it. For more tips, including how to replace the tension springs in your recliner chair, read on!

Did this summary help you?
Advertisement