Statistics
Textbooks
Boundless Statistics
Estimation and Hypothesis Testing
Comparing More than Two Means
Statistics Textbooks Boundless Statistics Estimation and Hypothesis Testing Comparing More than Two Means
Statistics Textbooks Boundless Statistics Estimation and Hypothesis Testing
Statistics Textbooks Boundless Statistics
Statistics Textbooks
Statistics
Concept Version 7
Created by Boundless

Factorial Experiments: Two Factors

A full factorial experiment is an experiment whose design consists of two or more factors with discrete possible levels.

Learning Objective

  • Outline the design of a factorial experiment, the corresponding notations, and the resulting analysis.


Key Points

    • A full factorial experiment allows the investigator to study the effect of each factor on the response variable, as well as the effects of interactions between factors on the response variable.
    • The experimental units of a factorial experiment take on all possible combinations of the discrete levels across all such factors.
    • To save space, the points in a two-level factorial experiment are often abbreviated with strings of plus and minus signs.

Terms

  • level

    The specific value of a factor in an experiment.

  • factor

    The explanatory, or independent, variable in an experiment.


Full Text

A full factorial experiment is an experiment whose design consists of two or more factors, each with discrete possible values (or levels), and whose experimental units take on all possible combinations of these levels across all such factors. A full factorial design may also be called a fully crossed design. Such an experiment allows the investigator to study the effect of each factor on the response variable, as well as the effects of interactions between factors on the response variable.

For the vast majority of factorial experiments, each factor has only two levels. For example, with two factors each taking two levels, a factorial experiment would have four treatment combinations in total, and is usually called a 2 by 2 factorial design.

If the number of combinations in a full factorial design is too high to be logistically feasible, a fractional factorial design may be done, in which some of the possible combinations (usually at least half) are omitted.

Notation

To save space, the points in a two-level factorial experiment are often abbreviated with strings of plus and minus signs. The strings have as many symbols as factors, and their values dictate the level of each factor: conventionally, −-− for the first (or low) level, and +++ for the second (or high) level .

Factorial Notation

This table shows the notation used for a 2x2 factorial experiment.

The factorial points can also be abbreviated by (1), aaa, bbb, and ababab, where the presence of a letter indicates that the specified factor is at its high (or second) level and the absence of a letter indicates that the specified factor is at its low (or first) level (for example, aaa indicates that factor AAA is on its high setting, while all other factors are at their low (or first) setting). (1) is used to indicate that all factors are at their lowest (or first) values.

Analysis

A factorial experiment can be analyzed using ANOVA or regression analysis. It is relatively easy to estimate the main effect for a factor. To compute the main effect of a factor AAA, subtract the average response of all experimental runs for which AAA was at its low (or first) level from the average response of all experimental runs for which AAA was at its high (or second) level.

Other useful exploratory analysis tools for factorial experiments include main effects plots, interaction plots, and a normal probability plot of the estimated effects.

When the factors are continuous, two-level factorial designs assume that the effects are linear. If a quadratic effect is expected for a factor, a more complicated experiment should be used, such as a central composite design.

Example

The simplest factorial experiment contains two levels for each of two factors. Suppose an engineer wishes to study the total power used by each of two different motors, AAA and BBB, running at each of two different speeds, 2000 or 3000 RPM. The factorial experiment would consist of four experimental units: motor AAA at 2000 RPM, motor BBB at 2000 RPM, motor AAA at 3000 RPM, and motor BBB at 3000 RPM. Each combination of a single level selected from every factor is present once.

This experiment is an example of a 222^22​2​​ (or 2 by 2) factorial experiment, so named because it considers two levels (the base) for each of two factors (the power or superscript), or (number of levels)(number of factors)(\text{number of levels})^{(\text{number of factors})}(number of levels)​(number of factors)​​, producing 22=42^2 = 42​2​​=4 factorial points.

Designs can involve many independent variables. As a further example, the effects of three input variables can be evaluated in eight experimental conditions shown as the corners of a cube.

Factorial Design

This figure is a sketch of a 2 by 3 factorial design.

This can be conducted with or without replication, depending on its intended purpose and available resources. It will provide the effects of the three independent variables on the dependent variable and possible interactions.

[ edit ]
Edit this content
Prev Concept
Randomized Block Design
What Is a Confidence Interval?
Next Concept
Subjects
  • Accounting
  • Algebra
  • Art History
  • Biology
  • Business
  • Calculus
  • Chemistry
  • Communications
  • Economics
  • Finance
  • Management
  • Marketing
  • Microbiology
  • Physics
  • Physiology
  • Political Science
  • Psychology
  • Sociology
  • Statistics
  • U.S. History
  • World History
  • Writing

Except where noted, content and user contributions on this site are licensed under CC BY-SA 4.0 with attribution required.